Flipper Zero application for reading temperature, humidity and pressure sensors like a DHT11/22, DS18B20, BMP280, HTU21 and more

BMP280 full function driver library for general MCU and Linux.

air quality sensor based on ESP32

module for the BMP280 sensor

BMP280 / BME280 driver STM32 HAL I2C

A platform agnostic Rust driver for the Bosch BM[PE]-280

Rocket flight recorder based on Raspberry Pi Zero W

Libraries for STM32 (STM32F103C8T6) on pure CMSIS.

Go·Hardware·Lean - Host drivers

ESP8266 and BME280 sensor for a minimalist weather station to put on your terrace

基于stm32-f4智能气象站及Wi-Fi开关，提供温度、气压、湿度及光强度测量、服务器上报，以及Wi-Fi控制下的GPIO口。Intelligent Weather Station and Wi-Fi switcher providing temperature ,atmosphere pressure ,humidity and lightness detecting and reporting .Also the control of GPIO in Wi-Fi.

Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module

Weather Display (7.5in eInk) with an ESP32, indoor sensors, receiving data from DarkSky.net

Air Quality with CJMCU-8128 (board with CCS811 / BMP280 and SI702x)

An all-in-one ESP8266 based weather station.

BMP280 and BME280 I2C driver for ESP32 boards using the IDF toolchain.

Erriez Arduino libraries

A very small and efficient library for usage with the BME280.

Universeller Jeti Telemetrie Sensor mit Vario - GPS - Strom - Spannung - Temperatur