Arduino core for AVR DA, DB, DD, EA and future DU-series parts - Microchip's latest and greatest AVRs. Library maintainers: Porting help and adviccee is available.

This MPLAB X bare metal example in Using the Internal OPAMP as Regulated Power Supply for MVIO (AN3636) shows how to use the OPAMP as a regulated power supply for a second voltage domain. This removes the need for a second external power supply. The regulated power supply features is showcased by acting as the second power supply for the Multi-V…

This Atmel START example in Low-BOM Microphone Interface Using the Analog Signal Conditioning (OPAMP) (AN3631) shows how to interface an electret microphone with a microcontroller (MCU) using the OPAMP. In addition to the microphone, only one resistor and one capacitor are required.

This Atmel Studio 7 bare metal code demonstrates the different ways of configuring the Analog Signal Conditioning (OPAMP) peripheral with the AVR128DB48 Curiosity Nano development kit. This is the factory programmed FW on the kit, allowing opamp evaluation without programming.

This Atmel Studio 7 bare metal example in Constant-Current Driver Using the Analog Signal Conditioning (OPAMP) Peripheral (AN3632), shows how to use the OPAMP to implement a constant-current driver using just one external resistor. The OPAMP peripheral also provides the ability to adjust the current setting under firmware control.

This repository provides a Mindi Schematic simulating a core independent overcurrent protection and current draw trigger level using the internal OPAMP, TCD and AC as well as a model of a DC motor.

These MPLAB X bare metal examples in Getting Started with Multi Voltage I/O (MVIO) (TB3287) show how the MVIO is used on the AVR® DB family of microcontrollers. The MVIO peripheral allows a subset of the I/O pins to be powered by a different I/O voltage domain VDDIO2, eliminating the need for external level shifters

This MPLAB X bare metal code demonstrates the different ways of configuring the Analog Signal Conditioning (OPAMP) peripheral with the AVR128DB48 Curiosity Nano development kit. This is the factory programmed FW on the kit, allowing opamp evaluation without programming.

This Atmel Studio 7 bare metal example in Low-BOM Microphone Interface Using the Analog Signal Conditioning (OPAMP) (AN3631) shows how to interface an electret microphone with a microcontroller (MCU) using the OPAMP. In addition to the microphone, only one resistor and one capacitor are required. The OPAMP also provides the ability to adjust the…

This Atmel Studio 7 bare metal example in Using the Internal OPAMP as Regulated Power Supply for MVIO (AN3636) shows how to use the OPAMP as a regulated power supply for a second voltage domain. This removes the need for a second external power supply. The regulated power supply features is showcased by acting as the second power supply for the …

Atmel Studio 7 training code examples for the AVR DB family of microcontrollers, demonstrating use of the OPAMP, XOSCHF and MVIO peripherals.

These MPLAB X MCC examples in Getting Started with Analog Signal Conditioning (OPAMP) (TB3286), show how the OPAMP can be used on the AVR DB family of microcontrollers. The OPAMP peripheral features up to three internal operational amplifiers.

This Atmel Studio 7 bare metal example in Gain and Offset Calibration of the Analog Signal Conditioning (OPAMP) Peripheral (AN3633) shows how to calibrate the gain and offset of the OPAMP when configured as a Programmable Gain Amplifier (PGA). The internal Digital-to-Analog converter (DAC) and Analog-to-Digital converter (ADC) are used to perfor…

These Atmel Studio 7 START examples in Getting Started with Analog Signal Conditioning (OPAMP) (TB3286), show how the OPAMP can be used on the AVR DB family of microcontrollers. The OPAMP peripheral features up to three internal operational amplifiers.

This repository provides a bare metal Microchip Studio project for a core independent overcurrent protection and handling with auto-calibration of current draw trigger level using the internal OPAMP, TCD, and AC.

MPLAB X training code examples for the AVR DB family of microcontrollers, demonstrating use of the OPAMP, XOSCHF and MVIO peripherals.

This repository provides an Atmel START project for a core independent overcurrent protection and handling with auto-calibration of current draw trigger level using the internal OPAMP, TCD and AC.

This Atmel START based example shows how to calibrate the gain and offset of the OPAMP when configured as a PGA. The internal DAC and ADC are used to perform the calibration procedure. No external components are required.

These Atmel Studio 7 bare metal examples in Getting Started with High Frequency Crystal Oscillator (XOSCHF) in AVR® DB (TB3272), show how the XOSCHF and Clock Failure Detection (CFD) is used on the AVR DB family of microcontrollers.

This MPLAB X bare metal example in Gain and Offset Calibration of the Analog Signal Conditioning (OPAMP) Peripheral (AN3633) shows how to calibrate the gain and offset of the OPAMP when configured as a Programmable Gain Amplifier (PGA). The internal Digital-to-Analog converter (DAC) and Analog-to-Digital converter (ADC) are used to perform the c…