Skip to content

Use DHT11 + Arduino UNO + Raspberry Pi3 + Thingworx Platform to connect AndroidThings with Thingworx

Notifications You must be signed in to change notification settings

theangels/AndroidThings_Thingworx_Demo

Repository files navigation

Android Things ThingWorx Demo

This sample shows how to use DHT11 + Arduino UNO + Raspberry Pi 3 + Thingworx Platform to connect Android Things with Thingworx.

Prepare

  • Raspberry Pi 3 with Android Things
  • Android Studio 2.2+
  • The following individual components:
    • 1 HDMI Monitor
    • 1 DHT11 sensor
    • 1 Arduino UNO
    • 1 RPI Arduino Shield Add-on
    • jumper wires

Schematics

Schematics for Raspberry Pi 3

Build and install

On Arduino IDE, click on the "Upload" button.

On Android Studio, click on the "Run" button.

If you have everything set up correctly:

  • The monitor will show the recent temperature and humidity from now on.
  • If a ThingWorx Platform project is configured (see instruction below), it will upload the sensor data to ThingWorx Platform by REST API.

ThingWorx Platform configuration (optional)

  1. Go to your project in the ThingWorx Platform
  2. Under Things (In the MODELING), click the New button and input the Name and select the Thing Template as GenericThing.
  3. Under Properties, click the Add My Property, also input the Name as "Temperature", select the Base Type as Number and checked the "Persistent" and "Logged".
  4. Do again but set the Name as "Humidity", and click Save button.
  5. Under Value Streams (In the DATA STORAGE), click the New button, choose the Value Stream and input the Name.
  6. Under Application Keys (In the SECURITY), click the New button, input the Name and select the User Name Reference. For example, I chose "Administrator"(Warning! It is unsafe).
  7. Under Things (In the MODELING), edit the thing you just created and add Tag.
  8. Use the same way to add the same Tag in Value Streams and Application Keys.

After running the sample, you can check that your data in ThingWorx Platform by running the service QueryPropertyHistory

Note: If the build.gradle isn't be update, the app will run offline and will not send sensor data to the ThingWorx Platform.

To do

  1. Support multiple sensors

License

Copyright 2016 The Android Open Source Project, Inc. Licensed to the Apache Software Foundation (ASF) under one or more contributor license agreements. See the NOTICE file distributed with this work for additional information regarding copyright ownership. The ASF licenses this file to you under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0 Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

About

Use DHT11 + Arduino UNO + Raspberry Pi3 + Thingworx Platform to connect AndroidThings with Thingworx

Topics

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published