Introduction

The project is to build a device for automatically pouring vodka into glasses that move on wooden toy tracks.

Presentation video

Quickstart

3D files

Parts to print available here.

Needed hardware

• ESP8266 board with Li-Ion 18650
• SSD1306 OLED 0.96" I2C 128x64
• VL53L0X time of flight distance sensor I2C
• 5 V relay module
• 5 V mini pump
• 5 V WS2812 12 led circle
• two push buttons
• silicone tube

Pinout

Description	ESP8266 PIN	ESP8266 PIN label
I2C SCL	GPIO5	D1
I2C SDA	GPIO4	D2
Relay	GPIO2	D4
WS2812	GPIO14	D5
Button 1	GPIO0	D3
Button 2	GPIO12	D6

Flash

platformio run -t upload

Settings

During splash screen press any button to enter settings mode.

Single click to increase or decrease current value.

Long click to change other settings.

Contributing

In general don't be afraid to send pull request. Use the "fork-and-pull" Git workflow.

1. Fork the repo
2. Clone the project to your own machine
3. Commit changes to your own branch
4. Push your work back up to your fork
5. Submit a Pull request so that we can review your changes

NOTE: Be sure to merge the latest from upstream before making a pull request!

Donations

If you enjoy this project and want to thanks, please use follow link:

BTC address: 18UDYg9mu26K2E3U479eMvMZXPDpswR7Jn

License

• GPLv3 license