A acrylic case for the [Odroid XU] (http://www.hardkernel.com/main/products/prdt_info.php?g_code=G137510300620)
This project contains two drawings (in different file types) for one box. You can use two different colours like me or you can be creative and change these models.
Bill of materials.
-
lasercut the part A and part B on two plates (e.g. with VisiCut, then you can use the VisiCut laser settings:
red: cut (green: mark)
-
if you use countersunk screws, then drill countersinks
-
screw the four bottom screws into the large spacers and put them through the 3 lower plates
-
screw the small spacers on the ground plate and screw the Odroid on top of them
-
continue plugging the other plates onto the spacers
-
put the top plate on the others and screw the last four screws into the spa spacers through the top
-
stick the case-feet on the marked circles on the bottom
OdroidCase
by
sedrubal
is licensed under a
Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.