Simple Wyze Vacuum for Home Assistant

Simple Wyze Vacuum for Home Assistant

General

Simple implementation of the Wyze Vacuum right into Home Assistant. I have only tested this against the official firmware version - 1.6.202 If you run into issues against a different firmware please be extra descriptive of the problem when filing an issue.

NOTE

By default, this integration DOES NOT automatically update your vacuum entity. This is due to Wyze applying a rate limit on integrations. For more details you can read the reddit thread here. However, there is an option to enable polling with a configuration change. This leaves this integration with two options to address this issue:

To update the state of the device, you can do a vacuum.send_command with command update which will update the state of the vacuum. See vacuum-card example below for an implementation.
Enable Polling

Prerequisites

Home Assistant 😅
HACS Installed in Home Assistant
Wyze Account (either with 2FA disabled or TOTP authentication setup when integrating Simple Wyze Vac. Note: This is NOT the same thing as the 6 digit code you get from your Authenticator app. Please see TOTP section)
Generate a Wyze Developer API key at Wyze Developer Page to receive a key_id and an api_key

Installation

On Home Assistant go to HACS -> Integration
Click menu on the top right
Click on custom repositories
Add https://github.com/romedtino/simple-wyze-vac as an Integration
Install/Add simple-wyze-vac
Restart Home Assistant
Navigate to Configuration
Navigate to Devices & Services
Click ADD INTEGRATION on the bottom right
Select Simple Wyze Vac
Enter your username, password, key_id and api_key (optionaly, the TOTP value see TOTP section)

If it all worked out, you should now have Wyze vacuum entity(ies)

Supported Features

TOTP (Note: This is NOT the same thing as the 6 digit code you get from your Authenticator app. Please see TOTP section)
Start
Stop / Pause
Return to Base
Filter lifespan information (Main filter, main brush and side brush)
Camera entity to show last vacuum map
Room names as toggleable switches (For area cleaning)
Room names as vacuum attributes
Battery Level
Optional Polling

Services

Simple Wyze Vac has a few available service commands.

Sweep Rooms

There are three options to sweep rooms - simple_wyze_vac.sweep_rooms, sweep_auto or sweep_rooms. See details below.

Using sweep rooms

Using built-in service and choosing the switch entities/rooms you want to do a sweep or in YAML

service: simple_wyze_vac.sweep_rooms
data:
  entity_id: vacuum.YOUR_VACUUM_NAME_HERE
  rooms:
    - switch.swv_kitchen
    - switch.swv_entryway

Using sweep auto

Automatically run area cleaning

based on the rooms (switch entities provided by Simple Wyze Vac) that are ON. For example, in the attached screenshot, invoking a sweep_auto will do an area cleaning of the Living Room.

service: vacuum.send_command
data:
  command: sweep_auto
target:
  entity_id: vacuum.YOUR_VACUUM_NAME_HERE

Manually designate area cleaning

(Must use serivce call) Example:

service: vacuum.send_command
data:
  command: sweep_rooms
  params:
    rooms:
      - Hallway
      - Kitchen
target:
  entity_id: vacuum.YOUR_VACUUM_NAME_HERE

Fan Speed control

Options are quiet standard strong

Example:

service: vacuum.set_fan_speed
data:
  fan_speed: quiet
target:
  entity_id: vacuum.YOUR_VACUUM_NAME_HERE

Update status

Since the integration no longer polls, you can query the status of the vacuum by sending a custom command update

service: vacuum.send_command
data:
  command: update
target:
  entity_id: vacuum.YOUR_VACUUM_NAME_HERE

Refresh Login Token

You can also refresh the login token if it has been awhile since you queried status and your login token has expired

service: vacuum.send_command
data:
  command: refresh_token
target:
  entity_id: vacuum.YOUR_VACUUM_NAME_HERE

Set Current Map

With multi-room support, it is possible to use send a service command to switch rooms

Example:

service: vacuum.send_command
data:
  command: set_current_map
  params:
    map: YOUR MAP NAME HERE
target:
  entity_id: vacuum.YOUR_VACUUM_NAME_HERE

Polling

To enable polling

Navigate to the Simple Wyze Vac Devices & Services page under Configuration
Select Configure
Check Enable polling and provide the interval. The interval value is in HH:MM:SS format. For example 00:01:00 would poll every 1 minute.

Misc

Location is currently not supported but it is considered "supported" by HA so the button doesn't crash the component when using vacuum-card defaults if you use it.

Implementing vacuum-card

There's a lovely Lovelace vacuum-card here in which you can implement your vacuum like so:

Here is my YAML configuration of the card

type: custom:vacuum-card
entity: vacuum.theovac
image: default
show_toolbar: true
show_status: true
show_name: true
compact_view: false
stats:
    default:
      - attribute: filter
        unit: hours
        subtitle: Filter
      - attribute: side_brush
        unit: hours
        subtitle: Side brush
      - attribute: main_brush
        unit: hours
        subtitle: Main brush
shortcuts:
  - name: Clean living room
    service: script.vacuum_room_clean
    icon: mdi:sofa
    service_data:
      rooms:
        - Living Room
  - name: Update
    service: script.vacuum_update_state
    icon: mdi:update

and the contents of the scripts it invokes

alias: Vacuum Room Clean
variables:
  rooms:
    - Living Room
sequence:
  - service: vacuum.send_command
    data:
      command: sweep_rooms
      params:
        rooms: ' {{ rooms }} '
    target:
      entity_id: vacuum.theovac
mode: single

alias: Vacuum Update State
sequence:
  - service: vacuum.send_command
    data:
      command: update
    target:
      entity_id: vacuum.theovac
mode: single

Adding map to vacuum card

There is support for at showing the last sweep map. With the exposed camera entity, in your vacuum-card (if you're using it) you can add camera.{vacuum_name}_camera e.g.

map: camera.wyzevac_camera

which should then show the last sweep map

TIP - Wrap your vacuum card in a 'conditional' card and use the vacuum state of 'docked' to test if it is docked and undocked. This way, you can still have the vacuum logo and not the map when the vacuum is not running. Another option is to create a helper input_boolean and use that instead to toggle between showing the map and showing the vacuum like so:

type: conditional
conditions:
  - entity: input_boolean.map_toggle
    state: 'off'
card:
  type: custom:vacuum-card
  entity: vacuum.theovac
  image: default
  show_toolbar: true
  show_status: true
  show_name: true
  compact_view: false
  stats:
    default:
      - attribute: filter
        unit: hours
        subtitle: Filter
      - attribute: side_brush
        unit: hours
        subtitle: Side Brush
      - attribute: main_brush
        unit: hours
        subtitle: Main Brush
  shortcuts:
    - name: Toggle Map
      service: input_boolean.toggle
      service_data:
        entity_id: input_boolean.map_toggle
      icon: mdi:map
  view_layout:
    position: sidebar
view_layout:
  position: sidebar

TOTP

wyze_sdk implemented support for using TOTP (Time-Based One-Time Password). Specifically, mintotp which works great!

How to Setup TOTP

If you already have 2FA setup on your Wyze account you will have to reapply it. If you already have Simple Wyze Vac integrated, you will have to remove it and readd it.
To remove it, navigate to the Wyze app and go - Accounts -> Security -> Two-Factor Authentication and remove verification
Back in Accounts -> Security -> Two-Factor Authentication, select Verification by Authenticator app.
Read the instructions from Wyze BUT make sure to copy and KEEP the value in step 3. This is your Base32 SECRET used to generate TOTP.
Go ahead and setup your TOTP on the Authenticator of your choosing.
Re-add Simple Wyze Vac under Add Integration of Home Assistant.
Enter your username, password, key_id, api_key and for TOTP, copy the Base32 SECRET you got from the Wyze app
Submit and you should now be authenticated with 2FA enabled!

Shoutouts

@shauntarves/wyze-sdk - This would not be possible without this awesomesauce
aarongodfrey - Helped figuring out what in the world I am doing
Samuel - More info on how custom components work
markdown-toc - For markdown TOC generator

Name		Name	Last commit message	Last commit date
Latest commit History 124 Commits
.github/ISSUE_TEMPLATE		.github/ISSUE_TEMPLATE
custom_components		custom_components
tests		tests
.pre-commit-config.yaml		.pre-commit-config.yaml
README.md		README.md
hacs.json		hacs.json
requirements.test.txt		requirements.test.txt
setup.cfg		setup.cfg

romedtino/simple-wyze-vac

Folders and files

Latest commit

History

Repository files navigation