Skip to content

qt3uw/qt3-utils

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Utility Classes and Functions for the QT3 Lab

This package provides a number of tools and fully-packaged programs for usage in the Quantum Technologies Teaching and Test-Bed (QT3) lab at the University of Washington.

The QT3 lab confocal microscope utilizes the following hardware to perform various spin-control experiments on quantum systems, such as NV centers in diamond:

  • TTL pulsers
    • Quantum Composer Sapphire
    • Spin Core PulseBlaster
  • Excelitas SPCM for photon detection
  • NI-DAQ card (PCIx 6363) for data acquisition and control
  • Jena System's Piezo Actuator Stage Control Amplifier
  • [Future] spectrometer

The code in this package facilitates usages of these devices to perform experiments.

Setup

Prerequisites

The utilities in this package depend on publicly available Python packages found on PyPI and drivers built by National Instruments for DAQmx and SpinCore for the PulseBlaster. These libraries must be installed separately.

Installation

Once the prerequisite packages have been installed, qt3utils can be installed from pip.

Normal Installation

pip install qt3utils

The qt3utils package depends on a handful of other qt3 packages and will be installed for you by default. Additional information may also be found here.

Update Tk/Tcl

Upgrading Tcl/Tk via Anaconda overcomes some GUI bugs on Mac OS Sonoma

conda install 'tk>=8.6.13'

Usage

This package provides GUI applications and a Python API for controlling the hardware and running experiments.

For instructions on using the python API, the simplest way to get started is to see one of the example Jupyter notebooks.

The following notebooks demonstrate usage of their respective experiment classes and the necessary hardware control objects for those experiments

Additionally, there are two notebooks that demonstrate some basic hardware tests

Most classes and methods contain docstrings that describe functionality, which you can discover through the python help() function.

Details of how the experiment classes work and how you can modify them are found in ExperimentsDoc.md

Help to automatically generate documentation would be appreciated.

Applications

QT3 Oscilloscope

The console program qt3scope comes with this package. It allows you to run a simple program from the command-line that reads the count rate on a particular digital input terminal on the NI DAQ. Further development may allow it to display count rates from other hardware.

It can be from the command line / terminal

> qt3scope

After pip install, there will be an executible file in your python environment. You should be able to create a softlink to that executable to a desktop or task bar icon, allowing to launch the program from a mouse click.

Starting in version 1.0.3, graphical dropdown menus and configuration windows will allow users to configure various hardware options.

YAML Configuration

Data Acquisition hardware supported by QT3Scope can also be configured by selecting a YAML file. The YAML file must contain a specific structure and names as shown below.

Default NIDAQ Edge Counter YAML configuration:
QT3Scope:
  DAQController:
    import_path : qt3utils.applications.controllers.nidaqedgecounter
    class_name  : QT3ScopeNIDAQEdgeCounterController
    configure : 
      daq_name : Dev1  # NI DAQ Device Name
      signal_terminal : PFI0  # NI DAQ terminal connected to input digital TTL signal
      clock_terminal :    # Specifies the digital input terminal to the NI DAQ to use for a clock. If left blank, interprets as None or NULL
      clock_rate: 100000  # NI DAQ clock rate in Hz
      num_data_samples_per_batch : 1000
      read_write_timeout : 10  # timeout in seconds for read/write operations
      signal_counter : ctr2  # NI DAQ counter to use for counting the input signal, e.g. ctr0, ctr1, ctr2, or ctr3
Default Random Data Generator configuration:
QT3Scope:
  DAQController:
    import_path : qt3utils.applications.controllers.random_data_generator
    class_name  : QT3ScopeRandomDataController
    configure : 
      simulate_single_light_source : False
      num_data_samples_per_batch : 10
      default_offset: 100
      signal_noise_amp: 0.5

All hardware controllers built for QT3Scope have a default configuration YAML file, which are found in src/qt3utils/applications/controllers.

QT3 Confocal Scan

The console program qt3scan performs a 2D (x,y) scan using a data acquisition controller object and a position controller object. The default controllers use an NIDAQ device that counts TTL edges (typically from an SPCM) and sets analog voltage values on a Jena system piezo actuator.

> qt3scan

Similar to qt3scope, the supported hardware can be configured via GUI or YAML file.

All hardware controllers that are built for QT3Scope have a default configuration YAML file, which will be found in src/qt3utils/applications/controllers.

Default NIDAQ Edge Counter YAML configuration:
QT3Scan:
  DAQController:
    import_path : qt3utils.applications.controllers.nidaqedgecounter
    class_name  : QT3ScanNIDAQEdgeCounterController
    configure : 
      daq_name : Dev1  # NI DAQ Device Name
      signal_terminal : PFI0  # NI DAQ terminal connected to input digital TTL signal
      clock_terminal :    # Specifies the digital input terminal to the NI DAQ to use for a clock. If left blank, interprets as None or NULL
      clock_rate: 100000  # NI DAQ clock rate in Hz
      num_data_samples_per_batch : 250
      read_write_timeout : 10  # timeout in seconds for read/write operations
      signal_counter : ctr2  # NI DAQ counter to use for counting the input signal, e.g. ctr0, ctr1, ctr2, or ctr3

  PositionController:
    import_path : qt3utils.applications.controllers.nidaqpiezocontroller    
    class_name  : QT3ScanNIDAQPositionController
    configure : 
      daq_name : Dev1  # NI DAQ Device Name
      write_channels : ao0,ao1,ao2  # NI DAQ analog output channels to use for writing position
      read_channels : ai0,ai1,ai2  # NI DAQ analog input channels to use for reading position
      scale_microns_per_volt : 8  # conversion factor from volts to microns, can also supply a list [8,8,8] or [6,4.2,5] 
      zero_microns_volt_offset: 0  # the voltage value that defines the position 0,0,0, can also supply a list [0,0,0] or [5,5,5] 
      minimum_allowed_position : 0  # microns
      maximum_allowed_position : 80  # microns
      settling_time_in_seconds : 0.001
Default Princeton Spectrometer YAML configuration:
QT3Scan:
  DAQController:
    import_path : qt3utils.applications.controllers.princeton_spectrometer
    class_name  : QT3ScanPrincetonSpectrometerController
    configure :
      exposure_time : 2000 # This is in ms
      center_wavelength : 700 # This is in nm
      sensor_temperature_set_point : -70 # This is in Celsius
      grating_selected : "[500nm,300][2][0]" # Varies based on spectrometer type
      wave_start : 600
      wave_end : 850
      experiment_name: "LF_Control"

  PositionController:
    import_path : qt3utils.applications.controllers.nidaqpiezocontroller
    class_name  : QT3ScanNIDAQPositionController
    configure :
      daq_name : Dev1  # NI DAQ Device Name
      write_channels : ao0,ao1,ao2  # NI DAQ analog output channels to use for writing position
      read_channels : ai0,ai1,ai2  # NI DAQ analog input channels to use for reading position
      scale_microns_per_volt : 8  # conversion factor from volts to microns, can also supply a list [8,8,8] or [6,4.2,5]
      zero_microns_volt_offset: 0  # the voltage value that defines the position 0,0,0, can also supply a list [0,0,0] or [5,5,5]
      minimum_allowed_position : 0  # microns
      maximum_allowed_position : 80  # microns
      settling_time_in_seconds : 0.001
Default Random Data Generator configuration:
QT3Scan:
  PositionController:
    import_path : qt3utils.applications.controllers.random_data_generator    
    class_name  : QT3ScanDummyPositionController
    configure : 
      maximum_allowed_position : 80
      minimum_allowed_position : 0

  DAQController:
    import_path : qt3utils.applications.controllers.random_data_generator
    class_name  : QT3ScanRandomDataController
    configure : 
      simulate_single_light_source : True
      num_data_samples_per_batch : 10
      default_offset: 100
      signal_noise_amp: 0.1
Default Spectrometer Random Data Generator configuration:
QT3Scope:
  DAQController:
    import_path : qt3utils.applications.controllers.random_data_generator
    class_name  : QT3ScopeRandomDataController
    configure : 
      simulate_single_light_source : False
      num_data_samples_per_batch : 10
      default_offset: 100
      signal_noise_amp: 0.5

QT3Scan:
  PositionController:
    import_path : qt3utils.applications.controllers.random_data_generator    
    class_name  : QT3ScanDummyPositionController
    configure : 
      maximum_allowed_position : 80
      minimum_allowed_position : 0

  DAQController:
    import_path : qt3utils.applications.controllers.random_data_generator
    class_name  : QT3ScanRandomDataController
    configure : 
      simulate_single_light_source : True
      num_data_samples_per_batch : 10
      default_offset: 100
      signal_noise_amp: 0.1

QT3 Piezo Controller

The console program qt3piezo comes installed via the 'nipiezojenapy' package, and may be launched from the command line.

> qt3piezo

This application can only be configured via command line options at this time. The nipiezojenapy python package should probably be moved into qt3utils.

QT3Scope / QT3Scan Hardware Development

Follow these instructions in order to add new hardware support to qt3scope or qt3scan.

For each application, you'll need to build a Python classes that adheres to each application's interfaces.

QT3Scope

  1. Build a class that adheres to QT3ScopeDAQControllerInterface as defined in src/qt3utils/applications/qt3scope/interface.py. There are a number of methods that you must construct. Two examples are QT3ScopeRandomDataController and QT3ScopeNIDAQEdgeCounterController. In addition to controlling hardware and returning data, they must also supply a way to configure the object via Python dictionary (configure method) and graphically (configure_view method).
  2. Create a YAML file with a default configuration, similar to that found in random_data_generator.yaml or
  3. Add your new controller to SUPPORTED_CONTROLLERS found in qt3scope

QT3Scan

Similar to qt3scope but with a little more work.

There are three controllers that are needed by qt3scan:

1. Application Controller

Currently there are two implementations of the Application Controller. The first application controller is made to support standard 2D (x,y) scans. It is used for scans using the NIDAQ Edge Counter Controller, NIDAQ Position Controller, Random Data Generator and Dummy Position Controller.

If you do not need any changes to the save function or special functionality to right-click on the scan image, then you can probably re-use this Application Controller.

The second application controller is an implements the hyperspectral image where each pixel each pixel in the 2D scan is based on a spectrum of counts over a range of wavelengths. QT3ScanHyperSpectralApplicationController class implements this data view when a user right-clicks on the scan and along with a function to save the full 3-dimensional data set.

2. DAQ Controller

To support new hardware that acquires data, build an implementation of QT3ScanDAQControllerInterface. The DAQ controller interface is now split into two distinct interfaces:

  • Counter DAQ Controller (QT3ScanCounterDAQControllerInterface): This interface is specifically designed for hardware that functions primarily as counters, such as devices measuring photon counts or other discrete events. It extends the base DAQ controller interface by adding methods tailored to sampling counts and computing count rates.

  • Spectrometer DAQ Controller (QT3ScanSpectrometerDAQControllerInterface): This is tailored for spectrometers that acquire spectral data. This interface adds a method to sample the spectrum, making it easier for developers to integrate spectrometers into the QT3Scan framework.

Examples are QT3ScanRandomDataController, QT3ScanNIDAQEdgeCounterController, and QT3ScanPrincetonSpectrometerController

Create a new python module in in src/qt3utils/applications/controllers for your hardware controller.

3. Position Controller

To support a new Position Controller build an implementation of QT3ScanPositionControllerInterface. Examples are QT3ScanDummyPositionController, and QT3ScanNIDAQPositionController

Create a new python module in in src/qt3utils/applications/controllers for your position controller.

4. Default YAML file

Create a default YAML file that configures your DAQ and Position Controllers. Place the YAML file in src/qt3utils/applications/controllers

5. Update QT3Scan.main

Add your new controllers to qt3scan.main.py

General Python Development

If you wish you make changes to qt3-utils (and hopefully merge those improvements into this repository) here are some brief instructions to get started. These instructions assume you are a member of the QT3 development team and have permission to push branches to this repo. If you are not, you can instead fork this repo into your own GitHub account, perform development and then issue a pull-request from your forked repo to this repo through GitHub. Alternatively, reach out to a maintainer of this repo to be added as a developer.

These are mostly general guidelines for software development and could be followed for other projects.

1. Create a development environment

Use Conda, venv or virtualenv with Python = 3.9.

> conda create --name qt3utilsdev python=3.9

As of this writing, we have primarily tested and used Python 3.9. Reach out to a Maintainer to discuss moving to newer versions of Python if this is needed.

2. Activate that environment

> conda activate qt3utilsdev

3. Clone this repository

> git clone https://github.com/qt3uw/qt3-utils.git

4. Install qt3-utils in "editor" mode

> cd qt3-utils
> pip install -e . 

The pip install -e . command installs the package in editor mode. This allows you to make changes to the source code and immediately see the effects of those changes in a Python interpreter. It saves you from having to call "pip install" each time you make a change and want to test it.

5. Create a new Issue

It's generally good practice to first create an Issue in this GitHub repository which describes the problem that needs to be addressed. It's also a good idea to be familiar with the current Issues that already exist. The change you want to make may already be reported by another user. In that case, you could collaborate with that person.

6. Create a new branch for your work

> git checkout -b X-add-my-fancy-new-feature

where it's good practice to use X to refer to a specific Issue to fix in this repository.

You should create a new branch only for a specific piece of new work that will be added to this repository. It is highly discouraged to create a separate branch for your microscope only and to use that branch to perform version control for Python scripts or Jupyter notebooks that run experiments. If you need version control for your exerpiment scripts and notebooks, you should create a separate git repository and install qt3utils in the normal way (pip install -U qt3utils) in a Python environment for your experimental work. If you need to have recent changes to qt3utils published to PyPI for your work, reach out to a Maintainer of this repo to ask them to release a new version.

7. Add your code and test with your hardware!

We do not have an official style convention, unfortunately. However please try to follow best-practices as outlined either in PEP 8 styleguide or Google's styleguide. There are other resources online, of course, that provide "best-practices" advice. Having said that, you will certainly find places where I've broken those guides. (Ideally, somebody would go through with a linter and fix all of these.). Please heavily document your source code.

We do not have an automatic test rig. This could be added by somebody if desired. But that could be complicated given that this code requires specific local hardware and the setup for each experiment is likely to be different. So, be sure to test your code rigorously and make sure there are no unintended side-effects.

Historically, documentation for this project has been "just okay". Please help this by adding any documentation for your changes where appropriate. There is now a docs folder that you can use to include any major additions or changes.

8. Push your branch

Once development and testing are complete you will want to push your branch to Github in order to merge it into the rest of the code-base.

When you first push a branch to Github, you will need to issue this command.

> git push -u origin X-add-my-fancy-new-feature

As you add more commits to your branch, you'll still want to push those changes every once in a while with a simple

> git push

(assuming that X-add-my-fancy-new-feature is your current local working branch)

Finally, before you issue a pull request, you will want to synchrononize your branch with any other changes made in 'main' to ensure there are no conflicting changes.

This is the following "flow" that has been used successfully in various development projects. However, there are other ways to do this.

> git checkout main
> git pull
> git checkout X-add-my-fancy-new-feature
> git rebase main
> git push -f

The series of commands above will pull down new changes from Github's main branch to your local working copy. The rebase command will then "replay" your changes on top of the most recent HEAD of the main branch. If there are conflicts, git will notify you and you will be forced to fix those conflicts before continuing with the rebase. If it seems too complicated, you can git rebase --abort to recover and then figure out what to do next. Reach out to a more experienced colleague, perhaps, for help.

The final git push -f is necessary (if there were indeed new commits on the main branch) and will "force" push your branch to Github. This is necessary due to the way git works.

You should then test your local branch with your hardware again!

This particular flow has the benefit of making a very clear git history that shows all the commits for each branch being merged in logical order.

Instead of following the instructions above, you may consider trying GitHub's "rebase" option when issuing a pull request. It will attempt the same set of operations. However, you may not have the opportunity to test the changes locally.

9. Issue a pull request

At the top of this qt3-utils GitHub repository is a 'pull-request' tab, from where you can create a request to merge your branch to another branch (usually you merge to main)

When you issue a pull request, be very clear and verbose about the changes you are making. New code must be reviewed by another colleague before it gets merged to master. Your pull request should include things like

  • a statement describing what is changed or new
  • a reference to the Issue being fixed here (Github will automatically generate a handy link)
  • a statement describing why you chose your specific implementation
  • results of tests on your hardware setup, which could be data, screenshots, etc. There should be a clear record demonstrating functionality.
  • a Jupyter notebook in the "examples" folder that demonstrate usage and changes
  • documentation

10. Perform Self Review

Before asking a colleague to review your changes, it's generally a good idea to review the changes yourself in Github. When you see your updates from this perspective you may find typos and changes that you wish to address first.

11. Obtain a Code Review from a colleague

Due to our lack of a test rig, merging should be done with care and code reviews should be taken seriously. If you are asked by a colleague to review their code, make sure to ask a lot of questions as you read through it. You may even want to test the branch on your own setup to ensure it doesn't break anything.

12. Address Changes

If you and your reviewer decide changes are needed, go back to your branch, make changes and push new commits. Repeat steps 7, 8, 10, 11 and 12 until you are satisfied.

13. Merge!

If you are satisfied and confident that your changes are ready, and your reviewer has approved the changes, press the green Merge button.

Notes

Debugging

LICENSE

LICENCE