Skip to content
This repository has been archived by the owner on Dec 29, 2022. It is now read-only.

piraka9011/dialogflow_ros

Repository files navigation

Dialogflow_ros

This package uses the Google Text-To-Speech (TTS) API to send results to Dialogflow, Google's NLP platform.

Further information can be found at the ROS wiki. Reproduced here:

Installation

There is an install.sh script available in git directory if you wish to use it, however, I will go over the steps one-by-one here.

Installing this package requires 3 main steps: cloning the dialogflow repo, setting up your Google cloud project, and setting up Dialogflow. However, we need to install PortAudio so we can use PyAudio to get mic data.

sudo apt-get install portaudio19-dev

Cloning The Repo

Install all the requirements using pip by cloning the Github repo and installing all the packages in requirements.txt.

cd ~/catkin_ws/src
git clone https://github.com/piraka9011/dialogflow_ros.git
cd dialogflow_ros
pip install -r requirements.txt

Google Cloud Setup

Follow the instructions here for configuring your Google Cloud project and installing the SDK for authentication. You will need a google/gmail account.

Usage of the Google Cloud SDK requires authentication. This means you require an API key and an activated service account to utilize the APIs.

  1. Setup a service account
  2. Download the service account key as a JSON.
  3. Check you have GOOGLE_APPLICATION_CREDENTIALS in your environment. This should be the path to the keys.
export GOOGLE_APPLICATION_CREDENTIALS='/path/to/key'
  1. Run the authentication command:
gcloud auth activate-service-account --key-file $GOOGLE_APPLICATION_CREDENTIALS

Dialogflow Setup

Follow the steps here to setup authentication with Dialogflow. Note the name of your project-id and make sure to change that in config/params.yaml.

Snowboy Setup

While a compiled .so of the library exists in the repo, you may need to compile one for your own system if you get a error complaining that _snowboydetect.so was not found. Clone the Snowboy repo to some directory and install the dependencies:

sudo apt-get install python-pyaudio python3-pyaudio sox
sudo apt-get install libatlas-base-dev
sudo apt-get install libpcre3 libpcre3-dev
pip install pyaudio

Then install swig in some other directory

wget http://downloads.sourceforge.net/swig/swig-3.0.10.tar.gz

./configure --prefix=/usr --without-clisp --without-maximum-compile-warnings
make
make install
install -v -m755 -d /usr/share/doc/swig-3.0.10
cp -v -R Doc/* /usr/share/doc/swig-3.0.10

Now go back to your Snowboy repo and run the following:

cd swig/Python
make

SWIG will generate a _snowboydetect.so file and a simple (but hard-to-read) python wrapper snowboydetect.py. Move this to /dialogflow_ros/scripts/snowboy replacing the original one.

Usage

Follow the steps below to setup the package properly.

Configuration

Go into the config directory and change the following parameters in the params.yaml file:

  • results_topic: (Optional) The topic where your results will be published.
  • project_id: The name of your project for the Google Speech node. This is the name of your Google Cloud project when going through the Google Cloud setup.

Launching nodes

To start the Dialogflow nodes, run the following command:

roslaunch dialogflow_ros dialogflow.launch

To use Snowboy hotword detection run:

roslaunch dialogflow_ros hotword_df.launch

ROS Nodes

mic_client

ROS node receives text from the Google Cloud Speech API and publishes it onto text_topic (see config/params.yaml). This is used by the dialogflow_client node.

Published Topics

text_topic (std_msgs/String) Acquired text from the Google Cloud Speech API.

dialogflow_client

ROS node that takes text from the mic_client node and sends it to Dialogflow for parsing.

Published Topics

results_topic (dialogflow_msgs/DialogflowResult) Publishes a message with the actions, parameters (python dictionary), and fulfillment text associated with the detected intent as a std_msgs/String.