Skip to content

An Open Baton monitoring plugin handling metrics pushed to the Zabbix server monitoring system

License

Notifications You must be signed in to change notification settings

openbaton/zabbix-plugin

Repository files navigation

Copyright © 2015-2016 Open Baton. Licensed under Apache v2 License.

Open Baton Zabbix Plugin

This project contains an implementation of a plugin for integrating Open Baton with Zabbix Server, as shown in the figure below.

Zabbix plugin architecture

Some of the benefits introduced by the usage of such plugin:

  • Make the consumers (NFVO, VNF managers, Fault Management System, AutoScaling Engine) independent to the monitoring system.
  • The communication between the consumers and Zabbix Plugin is JSON based, so the consumers can be written in any languages.
  • The values of the items are cached and updated periodically in order to avoid to contact the Zabbix Server each time a specific metric is required.

Prerequisites

The prerequisites are:

Set up environment

Create and give the right permissions to the folder which will host the configuration file:

sudo mkdir -p /etc/openbaton
sudo chwon -R $USER: /etc/openbaton

The Zabbix Plugin logs at default in the file /var/log/openbaton/openbaton-plugin-monitoring-zabbix.log. Create and give the right permissions in that folder running the command:

sudo mkdir -p /var/log/openbaton
sudo chwon -R $USER: /var/log/openbaton

Installation

Once the prerequisites are met, you can clone the following project from git and compile it:

git clone https://github.com/openbaton/zabbix-plugin.git
cd zabbix-plugin
./gradlew build -x test

Configuration

Once you are inside the zabbix-plugin directory type this command:

cp src/main/resources/plugin.conf.properties /etc/openbaton/openbaton-plugin-monitoring-zabbix.properties

The configuration parameters are explained in the following table.

Parameter Description Default
zabbix-plugin-ip IP of the Zabbix Plugin machine localhost
type The type of the plugin zabbix-plugin
client-request-frequency Update cache period (Basically each time t, Zabbix Plugin ask to every items value for all hosts and fill the local cache). Set 0 to disable it 10 (seconds)
history-length How long is the history. If the client-request-frequency is 10 seconds and history-length 100, we have available the value of the items of the previous 1000 seconds. 250
notification-receiver-server-context Context where the zabbix-plugin receive the notifications by the zabbix server. (see the section 'How to configure Zabbix to get notifications') /zabbixplugin/notifications
notification-receiver-server-port Port where the zabbix-plugin receive the notifications by the zabbix server. 8010
faults-consumer-endpoint Faults consumer endpoint to be notified in case of alarms, by default is the Open Baton FMS endpoint http://localhost:9000/alarm/vr
external-properties-file Full path of the configuration file. /etc/openbaton/openbaton-plugin-monitoring-zabbix.properties
zabbix-host IP of the Zabbix Server localhost
zabbix-port Port of the Zabbix Server
user-zbx User of the Zabbix Server Admin
password-zbx Password of Zabbix Server zabbix
zabbix-server-version Zabbix Server version 3.0

The configuration file should look like the one below:

## Zabbix Plugin

zabbix-plugin-ip=localhost
# Set client-request-frequency to 0 to disable the caching
type=zabbix-plugin
client-request-frequency=10
history-length=250
notification-receiver-server-context=/zabbixplugin/notifications
notification-receiver-server-port=8010
# Faults consumer endpoint to be notified in case of alarms,
# by default is the Open Baton FMS endpoint
faults-consumer-endpoint=http://localhost:9000/alarm/vr
external-properties-file=/etc/openbaton/openbaton-plugin-monitoring-zabbix.properties

## Zabbix Server info

zabbix-host=localhost
# zabbix-port=
user-zbx=Admin
password-zbx=zabbix
# Supported Zabbix versions: 2.2 and 3.0
zabbix-server-version=3.0

Additional Zabbix Server configuration required for receiving notifications

If you are going to use Open Baton FM System or you wish to use the createThreshold method, you need this additional configuration.
Copy the script zabbix-configuration/send_notification.sh in the Zabbix Server machine. In particular, in a special directory defined in the Zabbix Server configuration file (/etc/zabbix/zabbix_server.conf) as AlertScriptsPath variable. If the value of the variable AlertScriptsPath is for example "/usr/lib/zabbix/alertscripts", then copy the send_notification.sh script in that folder.
Once you are in the directory "/usr/lib/zabbix/alertscripts", add executable permissions to the script running the command:

sudo chmod +x send_notification.sh

Note: when you will use the method createThreshold, Zabbix Plugin will configure Zabbix Server automatically in order to use the script "send_notification.sh". What it will try to do is the configuration at this page custom alertscripts. If for any reason this auto-configuration won't work, you will see in the Zabbix Plugin logs, then you should execute this configuration manually as explained in the Zabbix documentation.

Run the Zabbix Plugin

Simply run the jar with:

java -jar build/lib/openbaton-plugin-monitoring-zabbix-<version>.jar

Check out the logs in /var/log/openbaton/openbaton-plugin-monitoring-zabbix.log

Notification mechanism

How does Zabbix Plugin receives notifications from the Zabbix Server?

When using the method createThreshold provided by the plugin, it automatically creates an action executed when the specific condition is met. If the threshold is crossed (the status of the trigger goes from OK to PROBLEM or viceversa) the action is performed. The action gets the information of the threshold and sends them to a custom alertScript. The custom alertscripts is executed on the Zabbix Server and its task is to send the information received from the action to the Zabbix plugin.

Zabbix plugin waits for notifications at the url: http://zabbix-plugin-ip:8010/zabbixplugin/notifications.

Default context and ports are specified in the configuration file as:

notification-receiver-server-context=/zabbixplugin/notifications
notification-receiver-server-port=8010

Using it via MonitoringPluginCaller

In order to use the MonitorPluginCaller you need to import the relative plugin-sdk, coming from Openbaton project. To import the plugin-sdk, please add in your Gradle file the following dependencies:

repositories {
       maven { url 'https://oss.sonatype.org/content/repositories/snapshots/' }
       maven { url 'https://oss.sonatype.org/content/repositories/releases/'  }
}

dependencies {
    compile 'org.openbaton:monitoring:5.0.1'
}

Then in your main, obtain the MonitoringPluginCaller as follow:

MonitoringPluginCaller monitoringPluginCaller = null;
    try {
      monitoringPluginCaller =
          new MonitoringPluginCaller(
              rabbitmqIp,
              rabbitmqUsr,
              rabbitmqPwd,
              5672,
              "zabbix-plugin",
              "zabbix",
              "15672",
              120000);
    } catch (Exception e) {
      e.printStackTrace();
    }

Make sure to use the correct arguments' values. A description is provided in the following:

Argument value Description
rabbitmqIp IP of RabbitMQ (broker)
rabbitmqUsr Username for RabbitMQ
rabbitmqPwd Password for RabbitMQ
5672 RabbitMQ default port (change it if needed)
zabbix-plugin Type of the Monitoring Plugin
zabbix Name of the Monitoring Plugin
15672 RabbitMQ default management port
120000 Timeout of the calls on the MonitoringPluginCaller

Functionalities provided by the Zabbix Plugin Interface

VirtualisedResourcePerformanceManagement interface

Methods Description
CREATE PM JOB Create one or more items to be monitored in one or more hosts.
DELETE PM JOB Delete a PM job.
QUERY PM JOB Get item values from one or more host. Fast method since the item values are cached.
SUBSCRIBE Subscribe to a pm job or a threshold in order to be notified.
NOTIFY Notification method invoked by zabbix plugin, the customer must not invoke directly this method.
CREATE THRESHOLD Create trigger on a specific item for one or more hosts
DELETE THRESHOLD Delete a threshold.
QUERY THRESHOLD Get information about the status of the thresholds

VirtualisedResourceFaultManagement interface

Methods Description
SUBSCRIBE Subscribe for alarm coming from an host
NOTIFY Notification method invoked by zabbix plugin, the customer must not invoke directly this method.
GET ALARM LIST Get alarms and relative status

VirtualisedResourcePerformanceManagement interface

Create PM Job

String createPMJob(ObjectSelection selector, List<String> performanceMetrics, List<String> performanceMetricGroup, Integer collectionPeriod,Integer reportingPeriod) throws MonitoringException;

This method creates one or more items to be monitored in one or more hosts.

selector: object to select the hosts in which we want to add the items.

performanceMetrics: List of items. We can create items which are available in the Zabbix documentation 2.2 or Zabbix documentation 3.0.

performanceMetricGroup: pre-defined list of metrics. (NOT YET IMPLEMENTED, please pass an empty list of string).

collectionPeriod: Update interval of the item/s in seconds.

reportingPeriod: Specifies the periodicity at which the VIM will report to the customers about performance information. (NOT YET IMPLEMENTED, please pass an integer >= 0 ).

In the following example we create two items ('net.tcp.listen[8080]' and 'agent.ping') for two hosts ('host-1' and 'host-2'). As a return value we get the ID of the PMJob.

ObjectSelection objectSelection = getObjectSelector("host-1","host-2");
List<String> performanceMetrics = getPerformanceMetrics("net.tcp.listen[8080]","agent.ping");
String pmJobId = monitoringPluginCaller.createPMJob(objectSelection, performanceMetrics, new ArrayList<String>(),60, 0);
System.out.println("PmJobId is: "+pmJobId);

Here the methods getObjectSelector and getPerformanceMetrics:

private List<String> getPerformanceMetrics(String ... performanceMetrics) {
    List<String> result = new ArrayList<String>();
    for(String performanceMetric : performanceMetrics){
        result.add(performanceMetric);
    }
    return result;
}

private ObjectSelection getObjectSelector(String ... hosts) {
    ObjectSelection objectSelection = new ObjectSelection();
    for(String host : hosts){
        objectSelection.addObjectInstanceId(host);
    }
    return objectSelection;
}

Delete Pm Job

List<String> deletePMJob(List<String> pmJobIdsToDelete) throws MonitoringException;

This method delete an existing PmJob. We can get the id of the PmJob after the creation with createPMJob. As a return value we get the ID of the PMJobs effectively deleted.

Query Pm Job

List<Item> queryPMJob(List<String> hostnames, List<String> performanceMetrics, String period) throws MonitoringException;

This method get item values from one or more host. As a return value we get the list of items.

hostnames: list of hostnames which we want to know items values.

performanceMetrics: List of items. We can get items which are available in: the Zabbix documentation 2.2, Zabbix documentation 3.0, and in the hostnames.

period: period in seconds. If period is 0 than you get the last available value of the item. If > 0 you get the average of the values inside that period. Remember than the zabbix-plugin read all value of the all hosts every client-request-frequency (see the configuration section) and keep them in the history. So if client-request-frequency is 15 seconds and the period 30 seconds you get the average of the previous 2 values of the item.

In the following example we ask for the last value of two items ('net.tcp.listen[8080]' and 'agent.ping') for the hosts 'host-1'.

ArrayList<String> hostnames = getHostnames("host-1");
ArrayList<String> performanceMetrics = getPerformanceMetrics("net.tcp.listen[8080]","agent.ping");
List<Item> items = monitoringPluginCaller.queryPMJob(hostnames,performanceMetrics,"0");

items: list of items. An item is a simple object of openbaton-libs which contains properties like: metric, hostname, lastValue, value.

Subscribe & notifyInfo

NOT YET IMPLEMENTED

Create Threshold

String createThreshold(ObjectSelection selector, String performanceMetric, ThresholdType thresholdType, ThresholdDetails thresholdDetails) throws MonitoringException;

This method create a trigger on a specific item for one or more hosts. As a return value we get the id of the threshold.

selector: object to select the hosts which will be part of the trigger.

performanceMetric: item to include in the trigger. The item need to be already present in the hosts specified in the selector.

thresholdType: defines the type of threshold. (NOT YET IMPLEMENTED, please pass ThresholdType.SINGLE for the moment).

thresholdDetails: details of the threshold. It contains:

  • function: refer to Zabbix trigger function 2.2 or Zabbix documentation 3.0
  • triggerOperator: operator
  • perceiverSeverity: severity of the trigger.
  • value: threshold value to compare with the actual value of the performanceMetric.
  • hostOperator: can be "|" or "&", meaning that the threshold will trigger when at least one host or all the hosts cross the threshold value.

In the following example we create a treshold for two hosts ('host-1' and 'host-2').

ObjectSelection objectSelector = getObjectSelector("host-1","host-2");
ThresholdDetails thresholdDetails= new ThresholdDetails("last(0)","=",PerceivedSeverity.CRITICAL,"0","|");
String thresholdId = zabbixMonitoringAgent.createThreshold(objectSelector,"net.tcp.listen[5001]",ThresholdType.SINGLE_VALUE,thresholdDetails);

The trigger that will be created has this expression: {host-1:net.tcp.listen[5001].last(0)}=0|{host-2:net.tcp.listen[5001].last(0)}=0. It means that if host-1 OR host-2 have no more process listening on the port 5001 then create an alarm with severity critical. Refer to Zabbix expression 2.2 or Zabbix expression 3.0 to understand better the expression.

Delete Threshold

List<String> deleteThreshold(List<String> thresholdIds) throws MonitoringException;

This method delete an existing threshold/s. We can get the id of the threshold after the creation with createThreshold. As a return value we get the list of the ID of the threshold effectively deleted.

Query Threshold

NOT YET IMPLEMENTED

VirtualisedResourceFaultManagement interface

Subscribe

String subscribeForFault(AlarmEndpoint filter) throws MonitoringException;

Subscribe for alarm generated by thresholds. As a return value we get the id of the subscription. filter: AlarmEndpoint object which contains:

  • name: name of the alarmEndpoint.
  • resourceId: hostname which we want to subscribe.
  • type: REST or JMS.
  • endpoint: endpoint where we want to be notified. It is and url for REST or a queue name for JMS. (actually only rest is supported).
  • perceivedSeverity: define the severity of the alarm we want to get. If we specify PerceivedSeverity.WARNING we will able to get notification from alarm with severity equals or higher than WARNING.

In the following example we subscribe for all alarms with severity higher than WARNING coming from the host 'host-1'.

AlarmEndpoint alarmEndpoint = new AlarmEndpoint("fault-manager-of-host-1","host-1",EndpointType.REST,"http://localhost:5555/alarm",PerceivedSeverity.WARNING);
String subscriptionId = monitoringPluginCaller.subscribeForFault(alarmEndpoint);

Unsubscribe

String unsubscribeForFault(String subscriptionId) throws MonitoringException;

This method detele the subscription with the ID passed as a argument. As a return value we get the id of the subscription effectively deleted. We can get the id of the subscription after the creation with subscribeForFault.

Get alarm list

NOT YET IMPLEMENTED

Notify

This method cannot be invoked by the customers as specified in the ETSI draft IFA005_Or-Vi_ref_point_Spec.

Zabbix severity mapping with ETSI severity

In Zabbix we can specify a severity of a trigger: not classified, information, warning, average, high, disaster.

In the ETSI draft there are different level of severity, called perceived severity: Indeterminate, warning, minor, major, critical.

So the mapping in the zabbix plugin is showed in the following table:

Zabbix severity ETSI perceived severity
Not classified Indeterminate
Information Warning
Warning Warning
Average Minor
High Major
Disaster Critical

Notifications types

When we create a new threshold, we would like to get a notification as soon as the threshold is crossed. Both interfaces send notifications with the method notify. According to ETSI specification there are 4 types of notifications.

The interface VirtualisedResourcePerformanceManagement sends two types of notifications:

  1. PerformanceInformationAvailableNotification (NOT YET IMPLEMENTED) : this notification informs the receiver that performance information is available.
  2. hresholdCrossedNotification (NOT YET IMPLEMENTED) : his notification informs the receiver that a threshold value has been crossed.

The interface VirtualisedResourceFaultManagement sends the following notifications:

  1. AlarmNotification: This notification informs the receiver of alarms resulting from the faults related to the virtualised resources managed by the VIM. It contains the Alarm with all the information about the fault.
  2. AlarmStateChangedNotification: This notification informs the receiver of state change of alarm related to the virtualised resources managed by the VIM, e.g. the alarm shall be set to “cleared” if the corresponding fault has been solved. It contains the id of the Alarm and the actual status which could be (CLEARED,FIRED,UPDATED).

Actually the zabbix-plugin when receives the notification by zabbix server, if the trigger has severity higher than Information, it creates an alarm (mapping zabbix notification into standard Alarm) and notify the subscribers with a AlarmNotification. If the notification is not new, then it sends an AlarmStateChangedNotification.

Issue tracker

Issues and bug reports should be posted to the GitHub Issue Tracker of this project

What is Open Baton?

OpenBaton is an open source project providing a comprehensive implementation of the ETSI Management and Orchestration (MANO) specification.

Open Baton is a ETSI NFV MANO compliant framework. Open Baton was part of the OpenSDNCore (www.opensdncore.org) project started almost three years ago by Fraunhofer FOKUS with the objective of providing a compliant implementation of the ETSI NFV specification.

Open Baton is easily extensible. It integrates with OpenStack, and provides a plugin mechanism for supporting additional VIM types. It supports Network Service management either using a generic VNFM or interoperating with VNF-specific VNFM. It uses different mechanisms (REST or PUB/SUB) for interoperating with the VNFMs. It integrates with additional components for the runtime management of a Network Service. For instance, it provides autoscaling and fault management based on monitoring information coming from the the monitoring system available at the NFVI level.

Source Code and documentation

The Source Code of the other Open Baton projects can be found here and the documentation can be found here .

News and Website

Check the Open Baton Website Follow us on Twitter @openbaton.

Licensing and distribution

Copyright [2015-2016] Open Baton project

Licensed under the Apache License, Version 2.0 (the "License");

you may not use this file except in compliance with the License. You may obtain a copy of the License at

http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Support

The Open Baton project provides community support through the Open Baton Public Mailing List and through StackOverflow using the tags openbaton.

Supported by

About

An Open Baton monitoring plugin handling metrics pushed to the Zabbix server monitoring system

Resources

License

Stars

Watchers

Forks

Packages

No packages published