Skip to content

Quickly setup your own HomeServer/NAS with these playbooks

Notifications You must be signed in to change notification settings

nickjg1/homeserver-ansible

Repository files navigation

Home Server Ansible Playbooks

Ansible Playbooks to help you set up your own server at home

These playbooks will configure and update Ubuntu, install Docker, and deploy the containers. It uses Traefik as it's reverse proxy manager and Authelia for Two Factor Authentication. See the services list here. All of the services will be accessible at https://<service>.<yourdomain>

Important: Make sure you set SSL/TLS encryption mode to full in Cloudflare.

Acknowledgments

This project is based heavily on Rishav Nandi's Ansible Homelab.

Prerequisites

In order for you to use these playbooks, you'll need a couple things:

  • Basic knowledge of internet protocols (SSH, TCP/UDP etc.), Ansible and Linux
  • Router with ports 80 and 443 forwarded to your servers IP address
  • Google Account
  • Domain name
  • Cloudflare account with your domain name nameservers pointed to their DNS Servers
  • A supported VPN to use with Transmission*
  • A fresh install of Ubuntu Server LTS 22.04

*If you don't plan on using Transmission then the VPN is not needed.

Setup

Once you've installed Ubuntu, you'll need an SSH Key for Ansible to use. You will need to create an one and copy it to the server. This can be done with the following commands:

ssh-keygen -o -a 100 -t ed25519 -f <path to ssh file> -C <your_email>
ssh-copy-id -i ~/.ssh/homeserver <user>@<server>

Note: I'd recommend storing the ssh file at ~/.ssh/homeserver

Fork this repository, then clone it to your local machine and run the following command to install the required roles:

git clone https://github.com/nickjg1/homeserver-ansible
ansible-galaxy install -r requirements.yml

Change directories and create an ansible vault file with the following command and enter a password when prompted:

cd homeserver-ansible
ansible-vault create group_vars/all/vault.yml

Open the vault file with the following command:

ansible-vault edit group_vars/all/vault.yml

Paste the following into the vault file and replace the values with your own:

user_password: "<your sudo password>"

Configuration

Make all the necessary changes to the group_vars/all/vars.yml and hosts/hosts files to match your environment. Extra packages can be added to group_vars/all/vars.yml. Any unwanted services can be removed in the services/tasks/main.yml file. See variable help for more information.

Notes and Disclaimers

This playbook opens your server up to the internet and potentially malicious attacks. Two factor authentication, Cloudflare and Jeff Geerling's Security Role offer good layers of protection, but it's always good practice to be mindful of the risks. Further configuration in Cloudflare can strengthen your security.

This also changes the default listening port of SSH to 69. It can be changed in group_vars/all/vars.yml.

Installation

Run this command, enter your sudo password and vault password when prompted:

ansible-playbook run.yml -K --ask-vault-pass

Post Installation and Troubleshooting

If you need help setting services up or have any issues with your installation, see post installation help.

Credit

Releases

No releases published

Packages

No packages published