(Install On Ubuntu (20.04 or Newer)

Before Proceeding

• Read the general Installation page first.
• These instructions apply to Ubuntu LTS distributions (20.04). They may work for other Ubuntu distributions (20.10 EOL, 21.04 EOL , 21.10 EOL July 2022) and derivatives (such as Linux Mint) but they may not have been tested. As of 28 Jan, 2022 motionEye has been Development Limbo. Ubuntu 22.04 is currently broken (uses a broken version of libmicrohttpd12 0.9.75-3).
• All commands require root; use sudo before each command or become root using sudo -i.
• Install instructions confirmed as of 28 Jan 2022. get-pip.py location correct as of 28 Jan 2022.

Instructions

1. Update and Upgrade fresh install of Ubuntu 20.04 or newer.

    apt update && sudo apt upgrade -y
   

2. Install ssh, curl, motion, ffmpeg and v4l-utils:

    apt-get install ssh curl motion ffmpeg v4l-utils -y
    reboot
   

3. Install the python 2.7 and pip2: (enter as separate lines, do not copy/paste as a group)

    apt-get install python2 -y
    curl https://bootstrap.pypa.io/pip/2.7/get-pip.py --output get-pip.py
    python2 get-pip.py
      There will be a warning that python 2.7 and pip2 are outdated and will not be updated
      This is normal and to be expected, as Python 2.7 is beyond EOL, as is pip2.
      When motionEye is updated to Python3, these messages will go away.
   

4. Install all prerequisites: (enter as separate lines, do not copy/paste as a group)

    apt-get install libffi-dev libzbar-dev libzbar0 -y
    apt-get install python2-dev libssl-dev libcurl4-openssl-dev libjpeg-dev -y
   

5. Install motioneye, which will automatically pull Python dependencies (tornado, jinja2, pillow and pycurl):

    pip2 install motioneye
   

6. Prepare the configuration directory:

    mkdir -p /etc/motioneye
    cp /usr/local/share/motioneye/extra/motioneye.conf.sample /etc/motioneye/motioneye.conf
   

7. Prepare the media directory:

    mkdir -p /var/lib/motioneye
   

8. Add an init script, configure it to run at startup and start the motionEye server:

   • Ubuntu 15.04 or later, systemd-based:

       cp /usr/local/share/motioneye/extra/motioneye.systemd-unit-local /etc/systemd/system/motioneye.service
       systemctl daemon-reload
       systemctl enable motioneye
       systemctl start motioneye
     

9. To upgrade to the newest version of motionEye, just issue:

        pip2 install motioneye --upgrade
        systemctl restart motioneye