Fingerprint Reader card (ita ver.)

Description

custom card for fingerprint management

this card manages a fingerprint reader managed by esphome firmware. the firmware for the esp is in the esphome-fingerprints.yaml file. you can find the original version on indumus.it

hacs Card install

1. add madmicio/lettore-impronte-digitali-ita as custom reposity

2. Find and install lettore impronte digitali plugin

3. Add a reference inside your resources config:

resources:
url: /hacsfiles/lettore-impronte-digitali-ita/fingerprint.js
type: module

Manual install

1. Download and copy fingerprint.js from (https://github.com/madmicio/lettore-impronte-digitali-ita) into your custom components directory.

2. Add a reference `` from (https://github.com/madmicio/lettore-impronte-digitali-ita) into your custom components directory. ` inside your resources config:

resources:
  - url: /local/"your_directory"/` from (https://github.com/madmicio/lettore-impronte-digitali-ita) into your custom components  directory.

    type: module

this card needs "saver" integration.

install SAVER integration

Saver is an extraordinary Piotr Machowski project, a simple but very powerful tool. fills a big gap in Home assistant.

lovelace essential configuration :

type: 'custom:fingerprint-reader'
state_fingerprint: sensor.stato_impronta_2
sensor_record: binary_sensor.acquisendo_impronta
saver: saver.saver
last_id: sensor.ultimo_id_impronta

Main Options

Name	Type	Default	Supported options	Description
type	string	Required	type: 'custom:fingerprint-reader'	Type of the card
esp_name	string	Option	your esp name	enter the name of the esp if different from: fingerprint_reader
state_fingerprint	string	Required	sensor.yourstatesensor	fingerprint sensor state
sensor_record	string	Required	sensor.youreredordersensor	fingerprint recorder state
saver	string	Required	es: saver.saver	saver component
last_id	string	Option	sensor.yourlastidssensor	last id sensor
name	string	Option	fingerprint name	if you have more than one sensor or want to give a name to the sensor you can assign it to the reader
show_name	string	Option	"true"	"true" or "false" show/hide reader name
name_align	string	Option	left	left - center - right name alignment
automation_list	string			list of automations to manage in the card

automations list options

Name	Type	Default	Supported options	Description
name	string	friendly name		automation custom name
icon	string	default icon		automation icon, if not indicated a default icon will be displayed and not the automation icon
label	string	none		if not configured the field is empty

automations option

this card gives the possibility to enable/disable the automations indicated in the configuration. if the configuration list contains only one automation, a button will appear which will toggle the automation. if the list contains more than one automation then the same button will show the list of configured automations. in this case the button will appear active if one of the configured automations is active.

type: 'custom:fingerprint-reader'
state_fingerprint: sensor.stato_impronta_2
sensor_record: binary_sensor.acquisendo_impronta
saver: saver.saver
last_id: sensor.ultimo_id_impronta
automation_list:
  - automation: automation.1
    name: automation 1
    label: open
    icon: mdi:door-open
  - automation: automation.2
    name: automation 2

for each automation you can configure the name, label and icon.

• name is an option, and if not specified in config, the button will have the friendly name of the automation
• icon is an option, if not indicated the button will have a default icon not, if assigned, the automation icon
• label is an option, if not indicated the field will remain empty