1-wire bus platform device for sunxi #135

zardam · 2013-05-18T12:05:35Z

The GPIO pin can be set in the script.bin inside the section [w1_para] with the key name gpio.

amery · 2013-05-18T13:05:08Z

nice! works? can you submit it to the mailing list?

zardam · 2013-05-19T23:31:59Z

It is working for me on a cubieboard with DS18B20 temperature sensors. I have sent a reworked patch on the mailing list.

This adds a way to register a platform device for 1-wire bus. It introduces a new section "[w1_para]" in the FEX to configure the GPIO pin number used for the bus, with the attribute named "gpio". The GPIO pin must also be defined in the "[gpio_para]" section. 1-wire device can then be accessed using the w1-gpio driver. Example configuration : [w1_para] gpio = 3 [gpio_para] gpio_used = 1 gpio_num = 3 ... gpio_pin_3 = port:PH7<0><default><default><0> It is also possible to configure the GPIO pin number with the module paramerer "gpio". In this case, if the pin is valid, it will be used instead of what is configured in the FEX script. Signed-off-by: Damien Nicolet <zardam@gmail.com>

oliv3r · 2013-06-14T22:39:54Z

Committed in 893b59b

closed

Calling irq_find_mapping from outside a irq_{enter,exit} section is unsafe and produces ugly messages if CONFIG_PROVE_RCU is enabled: If coming from the idle state, the rcu_read_lock call in irq_find_mapping will generate an unpleasant warning: <quote> =============================== [ INFO: suspicious RCU usage. ] 3.16.0-rc1+ #135 Not tainted ------------------------------- include/linux/rcupdate.h:871 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 0 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (rcu_read_lock){......}, at: [<ffffffc00010206c>] irq_find_mapping+0x4c/0x198 </quote> As this issue is fairly widespread and involves at least three different architectures, a possible solution is to add a new handle_domain_irq entry point into the generic IRQ code that the interrupt controller code can call. This new function takes an irq_domain, and calls into irq_find_domain inside the irq_{enter,exit} block. An additional "lookup" parameter is used to allow non-domain architecture code to be replaced by this as well. Interrupt controllers can then be updated to use the new mechanism. This code is sitting behind a new CONFIG_HANDLE_DOMAIN_IRQ, as not all architectures implement set_irq_regs (yes, mn10300, I'm looking at you...). Reported-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://lkml.kernel.org/r/1409047421-27649-2-git-send-email-marc.zyngier@arm.com Signed-off-by: Jason Cooper <jason@lakedaemon.net>

When we get a hung task it can often be valuable to see _all_ the held locks on the system (in case we are being blocked on trying to acquire one), e.g. with this patch we can immediately see where the problem is below: INFO: task trinity-c3:14933 blocked for more than 120 seconds. Not tainted 4.8.0-rc1+ #135 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. trinity-c3 D ffff88010c16fc88 0 14933 1 0x00080004 ffff88010c16fc88 000000003b9aca00 0000000000000000 0000000000000296 00000000776cdf88 ffff88011a520ae0 ffff88011a520b08 ffff88011a520198 ffffffff867d7f00 ffff88011942c080 ffff880116841580 ffff88010c168000 Call Trace: [<ffffffff845e9d37>] schedule+0x77/0x230 [<ffffffff833cb8b9>] __lock_sock+0x129/0x250 [<ffffffff833cb790>] ? __sk_destruct+0x450/0x450 [<ffffffff81408ac0>] ? wake_bit_function+0x2e0/0x2e0 [<ffffffff833d832b>] lock_sock_nested+0xeb/0x120 [<ffffffff83bad815>] irda_setsockopt+0x65/0xb40 [<ffffffff833c6c09>] SyS_setsockopt+0x139/0x230 [<ffffffff833c6ad0>] ? SyS_recv+0x20/0x20 [<ffffffff81004660>] ? trace_event_raw_event_sys_enter+0xb90/0xb90 [<ffffffff823c7023>] ? __this_cpu_preempt_check+0x13/0x20 [<ffffffff8162ee60>] ? __context_tracking_exit.part.3+0x30/0x1b0 [<ffffffff833c6ad0>] ? SyS_recv+0x20/0x20 [<ffffffff81007bd3>] do_syscall_64+0x1b3/0x4b0 [<ffffffff845f84aa>] entry_SYSCALL64_slow_path+0x25/0x25 Showing all locks held in the system: 2 locks held by khungtaskd/563: #0: (rcu_read_lock){......}, at: [<ffffffff81534ce6>] watchdog+0x106/0x910 #1: (tasklist_lock){......}, at: [<ffffffff8141b3c4>] debug_show_all_locks+0x74/0x360 1 lock held by trinity-c0/19280: #0: (sk_lock-AF_IRDA){......}, at: [<ffffffff83bab7c6>] irda_accept+0x176/0x10f0 1 lock held by trinity-c0/12865: #0: (sk_lock-AF_IRDA){......}, at: [<ffffffff83bab7c6>] irda_accept+0x176/0x10f0 Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mandeep Singh Baines <msb@chromium.org> Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1471538460-7505-1-git-send-email-vegard.nossum@oracle.com Signed-off-by: Ingo Molnar <mingo@kernel.org>

The apparmor_audit_data struct ordering got messed up during a merge conflict, resulting in the signal integer and peer pointer being in a union instead of a struct. For most of the 4.13 and 4.14 life cycle, this was hidden by commit 651e28c ("apparmor: add base infastructure for socket mediation") which fixed the apparmor_audit_data struct when its data was added. When that commit was reverted in -rc7 the signal audit bug was exposed, and unfortunately it never showed up in any of the testing until after 4.14 was released. Shaun Khan, Zephaniah E. Loss-Cutler-Hull filed nearly simultaneous bug reports (with different oopes, the smaller of which is included below). Full credit goes to Tetsuo Handa for jumping on this as well and noticing the audit data struct problem and reporting it. [ 76.178568] BUG: unable to handle kernel paging request at ffffffff0eee3bc0 [ 76.178579] IP: audit_signal_cb+0x6c/0xe0 [ 76.178581] PGD 1a640a067 P4D 1a640a067 PUD 0 [ 76.178586] Oops: 0000 [#1] PREEMPT SMP [ 76.178589] Modules linked in: fuse rfcomm bnep usblp uvcvideo btusb btrtl btbcm btintel bluetooth ecdh_generic ip6table_filter ip6_tables xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack iptable_filter ip_tables x_tables intel_rapl joydev wmi_bmof serio_raw iwldvm iwlwifi shpchp kvm_intel kvm irqbypass autofs4 algif_skcipher nls_iso8859_1 nls_cp437 crc32_pclmul ghash_clmulni_intel [ 76.178620] CPU: 0 PID: 10675 Comm: pidgin Not tainted 4.14.0-f1-dirty #135 [ 76.178623] Hardware name: Hewlett-Packard HP EliteBook Folio 9470m/18DF, BIOS 68IBD Ver. F.62 10/22/2015 [ 76.178625] task: ffff9c7a94c31dc0 task.stack: ffffa09b02a4c000 [ 76.178628] RIP: 0010:audit_signal_cb+0x6c/0xe0 [ 76.178631] RSP: 0018:ffffa09b02a4fc08 EFLAGS: 00010292 [ 76.178634] RAX: ffffa09b02a4fd60 RBX: ffff9c7aee0741f8 RCX: 0000000000000000 [ 76.178636] RDX: ffffffffee012290 RSI: 0000000000000006 RDI: ffff9c7a9493d800 [ 76.178638] RBP: ffffa09b02a4fd40 R08: 000000000000004d R09: ffffa09b02a4fc46 [ 76.178641] R10: ffffa09b02a4fcb8 R11: ffff9c7ab44f5072 R12: ffffa09b02a4fd40 [ 76.178643] R13: ffffffff9e447be0 R14: ffff9c7a94c31dc0 R15: 0000000000000001 [ 76.178646] FS: 00007f8b11ba2a80(0000) GS:ffff9c7afea00000(0000) knlGS:0000000000000000 [ 76.178648] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 76.178650] CR2: ffffffff0eee3bc0 CR3: 00000003d5209002 CR4: 00000000001606f0 [ 76.178652] Call Trace: [ 76.178660] common_lsm_audit+0x1da/0x780 [ 76.178665] ? d_absolute_path+0x60/0x90 [ 76.178669] ? aa_check_perms+0xcd/0xe0 [ 76.178672] aa_check_perms+0xcd/0xe0 [ 76.178675] profile_signal_perm.part.0+0x90/0xa0 [ 76.178679] aa_may_signal+0x16e/0x1b0 [ 76.178686] apparmor_task_kill+0x51/0x120 [ 76.178690] security_task_kill+0x44/0x60 [ 76.178695] group_send_sig_info+0x25/0x60 [ 76.178699] kill_pid_info+0x36/0x60 [ 76.178703] SYSC_kill+0xdb/0x180 [ 76.178707] ? preempt_count_sub+0x92/0xd0 [ 76.178712] ? _raw_write_unlock_irq+0x13/0x30 [ 76.178716] ? task_work_run+0x6a/0x90 [ 76.178720] ? exit_to_usermode_loop+0x80/0xa0 [ 76.178723] entry_SYSCALL_64_fastpath+0x13/0x94 [ 76.178727] RIP: 0033:0x7f8b0e58b767 [ 76.178729] RSP: 002b:00007fff19efd4d8 EFLAGS: 00000206 ORIG_RAX: 000000000000003e [ 76.178732] RAX: ffffffffffffffda RBX: 0000557f3e3c2050 RCX: 00007f8b0e58b767 [ 76.178735] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000000263b [ 76.178737] RBP: 0000000000000000 R08: 0000557f3e3c2270 R09: 0000000000000001 [ 76.178739] R10: 000000000000022d R11: 0000000000000206 R12: 0000000000000000 [ 76.178741] R13: 0000000000000001 R14: 0000557f3e3c13c0 R15: 0000000000000000 [ 76.178745] Code: 48 8b 55 18 48 89 df 41 b8 20 00 08 01 5b 5d 48 8b 42 10 48 8b 52 30 48 63 48 4c 48 8b 44 c8 48 31 c9 48 8b 70 38 e9 f4 fd 00 00 <48> 8b 14 d5 40 27 e5 9e 48 c7 c6 7d 07 19 9f 48 89 df e8 fd 35 [ 76.178794] RIP: audit_signal_cb+0x6c/0xe0 RSP: ffffa09b02a4fc08 [ 76.178796] CR2: ffffffff0eee3bc0 [ 76.178799] ---[ end trace 514af9529297f1a3 ]--- Fixes: cd1dbf7 ("apparmor: add the ability to mediate signals") Reported-by: Zephaniah E. Loss-Cutler-Hull <warp-spam_kernel@aehallh.com> Reported-by: Shuah Khan <shuahkh@osg.samsung.com> Suggested-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp> Tested-by: Ivan Kozik <ivan@ludios.org> Tested-by: Zephaniah E. Loss-Cutler-Hull <warp-spam_kernel@aehallh.com> Tested-by: Christian Boltz <apparmor@cboltz.de> Tested-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: stable@vger.kernel.org Signed-off-by: John Johansen <john.johansen@canonical.com>

Currently, nvdimm subsystem expects the device numa node for SCM device to be an online node. It also doesn't try to bring the device numa node online. Hence if we use a non-online numa node as device node we hit crashes like below. This is because we try to access uninitialized NODE_DATA in different code paths. cpu 0x0: Vector: 300 (Data Access) at [c0000000fac53170] pc: c0000000004bbc50: ___slab_alloc+0x120/0xca0 lr: c0000000004bc834: __slab_alloc+0x64/0xc0 sp: c0000000fac53400 msr: 8000000002009033 dar: 73e8 dsisr: 80000 current = 0xc0000000fabb6d80 paca = 0xc000000003870000 irqmask: 0x03 irq_happened: 0x01 pid = 7, comm = kworker/u16:0 Linux version 5.2.0-06234-g76bd729b2644 (kvaneesh@ltc-boston123) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) linux-sunxi#135 SMP Thu Jul 11 05:36:30 CDT 2019 enter ? for help [link register ] c0000000004bc834 __slab_alloc+0x64/0xc0 [c0000000fac53400] c0000000fac53480 (unreliable) [c0000000fac53500] c0000000004bc818 __slab_alloc+0x48/0xc0 [c0000000fac53560] c0000000004c30a0 __kmalloc_node_track_caller+0x3c0/0x6b0 [c0000000fac535d0] c000000000cfafe4 devm_kmalloc+0x74/0xc0 [c0000000fac53600] c000000000d69434 nd_region_activate+0x144/0x560 [c0000000fac536d0] c000000000d6b19c nd_region_probe+0x17c/0x370 [c0000000fac537b0] c000000000d6349c nvdimm_bus_probe+0x10c/0x230 [c0000000fac53840] c000000000cf3cc4 really_probe+0x254/0x4e0 [c0000000fac538d0] c000000000cf429c driver_probe_device+0x16c/0x1e0 [c0000000fac53950] c000000000cf0b44 bus_for_each_drv+0x94/0x130 [c0000000fac539b0] c000000000cf392c __device_attach+0xdc/0x200 [c0000000fac53a50] c000000000cf231c bus_probe_device+0x4c/0xf0 [c0000000fac53a90] c000000000ced268 device_add+0x528/0x810 [c0000000fac53b60] c000000000d62a58 nd_async_device_register+0x28/0xa0 [c0000000fac53bd0] c0000000001ccb8c async_run_entry_fn+0xcc/0x1f0 [c0000000fac53c50] c0000000001bcd9c process_one_work+0x46c/0x860 [c0000000fac53d20] c0000000001bd4f4 worker_thread+0x364/0x5f0 [c0000000fac53db0] c0000000001c7260 kthread+0x1b0/0x1c0 [c0000000fac53e20] c00000000000b954 ret_from_kernel_thread+0x5c/0x68 The patch tries to fix this by picking the nearest online node as the SCM node. This does have a problem of us losing the information that SCM node is equidistant from two other online nodes. If applications need to understand these fine-grained details we should express then like x86 does via /sys/devices/system/node/nodeX/accessY/initiators/ With the patch we get # numactl -H available: 2 nodes (0-1) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 130865 MB node 1 free: 129130 MB node distances: node 0 1 0: 10 20 1: 20 10 # cat /sys/bus/nd/devices/region0/numa_node 0 # dmesg | grep papr_scm [ 91.332305] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Region registered with target node 2 and online node 0 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190729095128.23707-1-aneesh.kumar@linux.ibm.com

[ Upstream commit da1115f ] Currently, nvdimm subsystem expects the device numa node for SCM device to be an online node. It also doesn't try to bring the device numa node online. Hence if we use a non-online numa node as device node we hit crashes like below. This is because we try to access uninitialized NODE_DATA in different code paths. cpu 0x0: Vector: 300 (Data Access) at [c0000000fac53170] pc: c0000000004bbc50: ___slab_alloc+0x120/0xca0 lr: c0000000004bc834: __slab_alloc+0x64/0xc0 sp: c0000000fac53400 msr: 8000000002009033 dar: 73e8 dsisr: 80000 current = 0xc0000000fabb6d80 paca = 0xc000000003870000 irqmask: 0x03 irq_happened: 0x01 pid = 7, comm = kworker/u16:0 Linux version 5.2.0-06234-g76bd729b2644 (kvaneesh@ltc-boston123) (gcc version 7.4.0 (Ubuntu 7.4.0-1ubuntu1~18.04.1)) linux-sunxi#135 SMP Thu Jul 11 05:36:30 CDT 2019 enter ? for help [link register ] c0000000004bc834 __slab_alloc+0x64/0xc0 [c0000000fac53400] c0000000fac53480 (unreliable) [c0000000fac53500] c0000000004bc818 __slab_alloc+0x48/0xc0 [c0000000fac53560] c0000000004c30a0 __kmalloc_node_track_caller+0x3c0/0x6b0 [c0000000fac535d0] c000000000cfafe4 devm_kmalloc+0x74/0xc0 [c0000000fac53600] c000000000d69434 nd_region_activate+0x144/0x560 [c0000000fac536d0] c000000000d6b19c nd_region_probe+0x17c/0x370 [c0000000fac537b0] c000000000d6349c nvdimm_bus_probe+0x10c/0x230 [c0000000fac53840] c000000000cf3cc4 really_probe+0x254/0x4e0 [c0000000fac538d0] c000000000cf429c driver_probe_device+0x16c/0x1e0 [c0000000fac53950] c000000000cf0b44 bus_for_each_drv+0x94/0x130 [c0000000fac539b0] c000000000cf392c __device_attach+0xdc/0x200 [c0000000fac53a50] c000000000cf231c bus_probe_device+0x4c/0xf0 [c0000000fac53a90] c000000000ced268 device_add+0x528/0x810 [c0000000fac53b60] c000000000d62a58 nd_async_device_register+0x28/0xa0 [c0000000fac53bd0] c0000000001ccb8c async_run_entry_fn+0xcc/0x1f0 [c0000000fac53c50] c0000000001bcd9c process_one_work+0x46c/0x860 [c0000000fac53d20] c0000000001bd4f4 worker_thread+0x364/0x5f0 [c0000000fac53db0] c0000000001c7260 kthread+0x1b0/0x1c0 [c0000000fac53e20] c00000000000b954 ret_from_kernel_thread+0x5c/0x68 The patch tries to fix this by picking the nearest online node as the SCM node. This does have a problem of us losing the information that SCM node is equidistant from two other online nodes. If applications need to understand these fine-grained details we should express then like x86 does via /sys/devices/system/node/nodeX/accessY/initiators/ With the patch we get # numactl -H available: 2 nodes (0-1) node 0 cpus: node 0 size: 0 MB node 0 free: 0 MB node 1 cpus: 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 node 1 size: 130865 MB node 1 free: 129130 MB node distances: node 0 1 0: 10 20 1: 20 10 # cat /sys/bus/nd/devices/region0/numa_node 0 # dmesg | grep papr_scm [ 91.332305] papr_scm ibm,persistent-memory:ibm,pmemory@44104001: Region registered with target node 2 and online node 0 Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20190729095128.23707-1-aneesh.kumar@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 4c3d905 ] In some cases kernel_getpeername() will held the socket lock which is already held when the socket layer calls error_report() callback. Since commit 9dfc685 ("inet: remove races in inet{6}_getname()") this problem becomes more likely because the socket lock will be held always. You will see something like: bob9-u5 login: [ 562.316860] BUG: spinlock recursion on CPU#7, swapper/7/0 [ 562.318562] lock: 0xffff8f2284720088, .magic: dead4ead, .owner: swapper/7/0, .owner_cpu: 7 [ 562.319522] CPU: 7 PID: 0 Comm: swapper/7 Not tainted 5.15.0+ linux-sunxi#135 [ 562.320346] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.13.0-2.module+el8.3.0+7353+9de0a3cc 04/01/2014 [ 562.321277] Call Trace: [ 562.321529] <IRQ> [ 562.321734] dump_stack_lvl+0x33/0x42 [ 562.322282] do_raw_spin_lock+0x8b/0xc0 [ 562.322674] lock_sock_nested+0x1e/0x50 [ 562.323057] inet_getname+0x39/0x110 [ 562.323425] ? sock_def_readable+0x80/0x80 [ 562.323838] lowcomms_error_report+0x63/0x260 [dlm] [ 562.324338] ? wait_for_completion_interruptible_timeout+0xd2/0x120 [ 562.324949] ? lock_timer_base+0x67/0x80 [ 562.325330] ? do_raw_spin_unlock+0x49/0xc0 [ 562.325735] ? _raw_spin_unlock_irqrestore+0x1e/0x40 [ 562.326218] ? del_timer+0x54/0x80 [ 562.326549] sk_error_report+0x12/0x70 [ 562.326919] tcp_validate_incoming+0x3c8/0x530 [ 562.327347] ? kvm_clock_read+0x14/0x30 [ 562.327718] ? ktime_get+0x3b/0xa0 [ 562.328055] tcp_rcv_established+0x121/0x660 [ 562.328466] tcp_v4_do_rcv+0x132/0x260 [ 562.328835] tcp_v4_rcv+0xcea/0xe20 [ 562.329173] ip_protocol_deliver_rcu+0x35/0x1f0 [ 562.329615] ip_local_deliver_finish+0x54/0x60 [ 562.330050] ip_local_deliver+0xf7/0x110 [ 562.330431] ? inet_rtm_getroute+0x211/0x840 [ 562.330848] ? ip_protocol_deliver_rcu+0x1f0/0x1f0 [ 562.331310] ip_rcv+0xe1/0xf0 [ 562.331603] ? ip_local_deliver+0x110/0x110 [ 562.332011] __netif_receive_skb_core+0x46a/0x1040 [ 562.332476] ? inet_gro_receive+0x263/0x2e0 [ 562.332885] __netif_receive_skb_list_core+0x13b/0x2c0 [ 562.333383] netif_receive_skb_list_internal+0x1c8/0x2f0 [ 562.333896] ? update_load_avg+0x7e/0x5e0 [ 562.334285] gro_normal_list.part.149+0x19/0x40 [ 562.334722] napi_complete_done+0x67/0x160 [ 562.335134] virtnet_poll+0x2ad/0x408 [virtio_net] [ 562.335644] __napi_poll+0x28/0x140 [ 562.336012] net_rx_action+0x23d/0x300 [ 562.336414] __do_softirq+0xf2/0x2ea [ 562.336803] irq_exit_rcu+0xc1/0xf0 [ 562.337173] common_interrupt+0xb9/0xd0 It is and was always forbidden to call kernel_getpeername() in context of error_report(). To get rid of the problem we access the destination address for the peer over the socket structure. While on it we fix to print out the destination port of the inet socket. Fixes: 1a31833 ("DLM: Replace nodeid_to_addr with kernel_getpeername") Reported-by: Bob Peterson <rpeterso@redhat.com> Signed-off-by: Alexander Aring <aahringo@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 9a14b65 upstream. Remove the spinlock around the tree traversal as we are calling possibly sleeping functions. We do not need a spinlock here as there will be no modifications to this tree at this point. This prevents warnings like this to occur in dmesg: [ 653.774996] BUG: sleeping function called from invalid context at kernel/loc\ king/mutex.c:280 [ 653.775088] in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1827, nam\ e: umount [ 653.775152] preempt_count: 1, expected: 0 [ 653.775191] CPU: 0 PID: 1827 Comm: umount Tainted: G W OE 5.17.0\ -rc7-00006-g4eb628dd74df linux-sunxi#135 [ 653.775195] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.14.0-\ 1.fc33 04/01/2014 [ 653.775197] Call Trace: [ 653.775199] <TASK> [ 653.775202] dump_stack_lvl+0x34/0x44 [ 653.775209] __might_resched.cold+0x13f/0x172 [ 653.775213] mutex_lock+0x75/0xf0 [ 653.775217] ? __mutex_lock_slowpath+0x10/0x10 [ 653.775220] ? _raw_write_lock_irq+0xd0/0xd0 [ 653.775224] ? dput+0x6b/0x360 [ 653.775228] cifs_kill_sb+0xff/0x1d0 [cifs] [ 653.775285] deactivate_locked_super+0x85/0x130 [ 653.775289] cleanup_mnt+0x32c/0x4d0 [ 653.775292] ? path_umount+0x228/0x380 [ 653.775296] task_work_run+0xd8/0x180 [ 653.775301] exit_to_user_mode_loop+0x152/0x160 [ 653.775306] exit_to_user_mode_prepare+0x89/0xd0 [ 653.775315] syscall_exit_to_user_mode+0x12/0x30 [ 653.775322] do_syscall_64+0x48/0x90 [ 653.775326] entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 187af6e ("cifs: fix handlecache and multiuser") Reported-by: kernel test robot <oliver.sang@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ linux-sunxi#135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. Signed-off-by: Jan Dabros <jsd@semihalf.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/ Cc: stable@vger.kernel.org Fixes: e891db1 ("tpm: turn on TPM on suspend for TPM 1.x") [Jason: reworked commit message, added metadata] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

commit 23393c6 upstream. Currently tpm transactions are executed unconditionally in tpm_pm_suspend() function, which may lead to races with other tpm accessors in the system. Specifically, the hw_random tpm driver makes use of tpm_get_random(), and this function is called in a loop from a kthread, which means it's not frozen alongside userspace, and so can race with the work done during system suspend: tpm tpm0: tpm_transmit: tpm_recv: error -52 tpm tpm0: invalid TPM_STS.x 0xff, dumping stack for forensics CPU: 0 PID: 1 Comm: init Not tainted 6.1.0-rc5+ linux-sunxi#135 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 Call Trace: tpm_tis_status.cold+0x19/0x20 tpm_transmit+0x13b/0x390 tpm_transmit_cmd+0x20/0x80 tpm1_pm_suspend+0xa6/0x110 tpm_pm_suspend+0x53/0x80 __pnp_bus_suspend+0x35/0xe0 __device_suspend+0x10f/0x350 Fix this by calling tpm_try_get_ops(), which itself is a wrapper around tpm_chip_start(), but takes the appropriate mutex. Signed-off-by: Jan Dabros <jsd@semihalf.com> Reported-by: Vlastimil Babka <vbabka@suse.cz> Tested-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Vlastimil Babka <vbabka@suse.cz> Link: https://lore.kernel.org/all/c5ba47ef-393f-1fba-30bd-1230d1b4b592@suse.cz/ Cc: stable@vger.kernel.org Fixes: e891db1 ("tpm: turn on TPM on suspend for TPM 1.x") [Jason: reworked commit message, added metadata] Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit f99cd56 ] syzkaller report: kernel BUG at net/core/skbuff.c:3452! invalid opcode: 0000 [jwrdegoede#1] PREEMPT SMP KASAN PTI CPU: 0 PID: 0 Comm: swapper/0 Not tainted 6.7.0-rc4-00009-gbee0e7762ad2-dirty linux-sunxi#135 RIP: 0010:skb_copy_and_csum_bits (net/core/skbuff.c:3452) Call Trace: icmp_glue_bits (net/ipv4/icmp.c:357) __ip_append_data.isra.0 (net/ipv4/ip_output.c:1165) ip_append_data (net/ipv4/ip_output.c:1362 net/ipv4/ip_output.c:1341) icmp_push_reply (net/ipv4/icmp.c:370) __icmp_send (./include/net/route.h:252 net/ipv4/icmp.c:772) ip_fragment.constprop.0 (./include/linux/skbuff.h:1234 net/ipv4/ip_output.c:592 net/ipv4/ip_output.c:577) __ip_finish_output (net/ipv4/ip_output.c:311 net/ipv4/ip_output.c:295) ip_output (net/ipv4/ip_output.c:427) __ip_queue_xmit (net/ipv4/ip_output.c:535) __tcp_transmit_skb (net/ipv4/tcp_output.c:1462) __tcp_retransmit_skb (net/ipv4/tcp_output.c:3387) tcp_retransmit_skb (net/ipv4/tcp_output.c:3404) tcp_retransmit_timer (net/ipv4/tcp_timer.c:604) tcp_write_timer (./include/linux/spinlock.h:391 net/ipv4/tcp_timer.c:716) The panic issue was trigered by tcp simultaneous initiation. The initiation process is as follows: TCP A TCP B 1. CLOSED CLOSED 2. SYN-SENT --> <SEQ=100><CTL=SYN> ... 3. SYN-RECEIVED <-- <SEQ=300><CTL=SYN> <-- SYN-SENT 4. ... <SEQ=100><CTL=SYN> --> SYN-RECEIVED 5. SYN-RECEIVED --> <SEQ=100><ACK=301><CTL=SYN,ACK> ... // TCP B: not send challenge ack for ack limit or packet loss // TCP A: close tcp_close tcp_send_fin if (!tskb && tcp_under_memory_pressure(sk)) tskb = skb_rb_last(&sk->tcp_rtx_queue); //pick SYN_ACK packet TCP_SKB_CB(tskb)->tcp_flags |= TCPHDR_FIN; // set FIN flag 6. FIN_WAIT_1 --> <SEQ=100><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // TCP B: send challenge ack to SYN_FIN_ACK 7. ... <SEQ=301><ACK=101><CTL=ACK> <-- SYN-RECEIVED //challenge ack // TCP A: <SND.UNA=101> 8. FIN_WAIT_1 --> <SEQ=101><ACK=301><END_SEQ=102><CTL=SYN,FIN,ACK> ... // retransmit panic __tcp_retransmit_skb //skb->len=0 tcp_trim_head len = tp->snd_una - TCP_SKB_CB(skb)->seq // len=101-100 __pskb_trim_head skb->data_len -= len // skb->len=-1, wrap around ... ... ip_fragment icmp_glue_bits //BUG_ON If we use tcp_trim_head() to remove acked SYN from packet that contains data or other flags, skb->len will be incorrectly decremented. We can remove SYN flag that has been acked from rtx_queue earlier than tcp_trim_head(), which can fix the problem mentioned above. Fixes: 1da177e ("Linux-2.6.12-rc2") Co-developed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Dong Chenchen <dongchenchen2@huawei.com> Link: https://lore.kernel.org/r/20231210020200.1539875-1-dongchenchen2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

1-wire bus platform device for sunxi #135

1-wire bus platform device for sunxi #135

zardam commented May 18, 2013

amery commented May 18, 2013

zardam commented May 19, 2013

oliv3r commented Jun 14, 2013

1-wire bus platform device for sunxi #135

Are you sure you want to change the base?

1-wire bus platform device for sunxi #135

Conversation

zardam commented May 18, 2013

amery commented May 18, 2013

zardam commented May 19, 2013

oliv3r commented Jun 14, 2013