KIAUH - Klipper Installation And Update Helper

---

📋 Please see the Changelog for possible important information !

---

📢 Disclaimer: Usage of this script happens at your own risk!

This script acts as a helping hand for you to get set up in a fast and comfortable way.
This does not mean, it will relieve you of using your brain.exe! 🧠
Please also always pay attention to the individual component repositories (all linked below).
Feel free to give it a try. If you have suggestions or encounter any problems, please report them.

---

🛠️ Instructions:

For downloading this script it is necessary to have git installed.
If you haven't, please run sudo apt-get install git -y to install git first.
You will need it anyways! 😄

After git is installed, use the following commands in the given order to download and execute the script:

cd ~
git clone https://github.com/th33xitus/kiauh.git
./kiauh/kiauh.sh

---

🧰 Functions and Features:

• New in v3.0.0: You can now install multiple instances (Klipper/Moonraker/DWC/Octoprint) on the same Pi!

---

Core Functions:

• Installing Klipper to your Raspberry Pi or other Debian based Linux Distribution.
• Installing of the Moonraker API (needed for Mainsail, Fluidd and KlipperScreen)
• Installing several different web interfaces such as Mainsail, Fluidd, Duet Web Control or OctoPrint including their dependencies.
• Installing of KlipperScreen (OctoScreen but for Klipper!)
• Updating of all the listed installations above excluding OctoPrint. For updating OctoPrint, please use the OctoPrint interface!
• Removing of all the listed installations above.
• Backup of all the listed installations above.

Also possible:

• Build the Klipper Firmware
• Flash the MCU
• Read ID of the currently connected MCU
• and more ...

For a list of additional features please see: Feature List

---

📝 Notes:

• Tested only on Raspberry Pi OS Lite (Debian 10 Buster)
  • Other Debian based distributions can work
  • Reported to work on Armbian too
• During the use of this script you might be asked for your sudo password. There are several functions involved which need sudo privileges.

---

🛈 Sources & Further Information

For more information or instructions to the various components KIAUH can install, please check out the corresponding repositories listed below:

---

⛵Klipper by KevinOConnor :

https://github.com/KevinOConnor/klipper

---

⛵Klipper S-Curve fork by dmbutyugin :

https://github.com/dmbutyugin/klipper/tree/scurve-smoothing
https://github.com/dmbutyugin/klipper/tree/scurve-shaping

---

🌙Moonraker by Arksine :

https://github.com/Arksine/moonraker

---

💨Mainsail Webinterface by meteyou :

https://github.com/meteyou/mainsail

---

🌊Fluidd Webinterface by cadriel :

https://github.com/cadriel/fluidd

---

🕸️Duet Web Control by Duet3D :

https://github.com/Duet3D/DuetWebControl

---

🕸️DWC2-for-Klipper-Socket by Stephan3 :

https://github.com/Stephan3/dwc2-for-klipper-socket

---

🖥️KlipperScreen by jordanruthe :

https://github.com/jordanruthe/KlipperScreen

---

🐙OctoPrint Webinterface by OctoPrint :

https://octoprint.org
https://github.com/OctoPrint/OctoPrint

---

❓ FAQ

Q: Can i use this script to install multiple instances of Klipper on the same Pi? (Multisession?)

A: Yes, it is finally possible 🙂