Center Lines
BPLRFE edited this page Oct 16, 2016
·
1 revision
Upon clicking on "Center Lines" or "Center Line" you will get a menu with different choices.
grid on will toggle the visibility of the grid
spacing: will define the spacing of the main grid (default: 1 mm)
display period: will define how often the lines are displayed (default: 20)
color: line color of the grid lines
line width: line width of the grid lines (default: 0,15)
dot length: defines the length of the dot (default: 2 mm)
dash length: defines the length of the dash (default: 6mm)
gap length: defines the length of the gap (default 2 mm)
line width: defines width of the line (default: 0,3 mm)
centerLine_color: defines the color of the center Line
Set as default: Accept settings as default
- click on the icon and choose your green highlighted circle
- a dash-dotted line will be drawn from the center of the circle
- select horizontal and vertical end of line
- two center lines have to be drawn to show the wanted output
- click on the icon and choose a grab point being part of the symmetry axis
- move cursor in one direction horizontal or vertical and click to define first point of line
- move cursor in other direction horizontal or vertical and click to define second point of line
Tipps:
- changing the length of the lines afterwards can be done by selecting the dimension in the tree view, and changing the values in the section "Placement Clicks" in the data tab