Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Wiki: feed and rapid can't be less than 10% #1161

Open
wants to merge 1 commit into
base: master
Choose a base branch
from
Open

Wiki: feed and rapid can't be less than 10% #1161

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Jump to
Jump to file
Failed to load files.
Diff view
Diff view
6 changes: 3 additions & 3 deletions doc/markdown/commands.md
View file
Open in desktop
Expand Up @@ -281,7 +281,7 @@ Grbl v1.1 installed more than a dozen new realtime commands to control feed, rap

- Immediately alters the feed override value. An active feed motion is altered within tens of milliseconds.
- Does not alter rapid rates, which include G0, G28, and G30, or jog motions.
- Feed override value can not be 10% or greater than 200%.
- Feed override value can not be less than 10% or greater than 200%.
- If feed override value does not change, the command is ignored.
- Feed override range and increments may be changed in config.h.
- The commands are:
Expand All @@ -308,7 +308,7 @@ Grbl v1.1 installed more than a dozen new realtime commands to control feed, rap

- Immediately alters the spindle speed override value. An active spindle speed is altered within tens of milliseconds.
- Override values may be changed at any time, regardless of if the spindle is enabled or disabled.
- Spindle override value can not be 10% or greater than 200%
- Spindle override value can not be less than 10% or greater than 200%
- If spindle override value does not change, the command is ignored.
- Spindle override range and increments may be altered in config.h.
- The commands are:
Expand Down Expand Up @@ -342,4 +342,4 @@ Grbl v1.1 installed more than a dozen new realtime commands to control feed, rap
- Toggles mist coolant state and output pin until the next toggle or g-code command alters it.
- May be commanded at any time while in IDLE, RUN, or HOLD states. It is otherwise ignored.
- This override directly changes the coolant modal state in the g-code parser. Grbl will continue to operate normally like it received and executed an `M7` or `M9` g-code command.
- When `$G` g-code parser state is queried, the toggle override change will be reflected by an `M7` enabled or disabled with an `M9` or not appearing when `M8` is present.
- When `$G` g-code parser state is queried, the toggle override change will be reflected by an `M7` enabled or disabled with an `M9` or not appearing when `M8` is present.