Python library to control an ILI9225 TFT LCD display. Allows simple drawing on the display without installing a kernel module. This library is compatible with both Python 3 (recommended) and Python 2.
For all platforms (Raspberry Pi and Beaglebone Black) make sure you have the following dependencies:
sudo apt-get update
sudo apt-get install build-essential python3-dev python3-smbus python3-pip python3-imaging python3-numpy
For a Raspberry Pi make sure you have the RPi.GPIO library by executing:
sudo pip3 install RPi.GPIO
For a BeagleBone Black make sure you have the Adafruit_BBIO library by executing:
sudo pip3 install Adafruit_BBIO
Install the library by downloading with the download link on the right, unzipping the archive, navigating inside the library's directory and executing:
sudo python3 setup.py install
For all platforms (Raspberry Pi and Beaglebone Black) make sure you have the following dependencies:
sudo apt-get update
sudo apt-get install build-essential python-dev python-smbus python-pip python-imaging python-numpy
For a Raspberry Pi make sure you have the RPi.GPIO library by executing:
sudo pip install RPi.GPIO
For a BeagleBone Black make sure you have the Adafruit_BBIO library by executing:
sudo pip install Adafruit_BBIO
Install the library by downloading with the download link on the right, unzipping the archive, navigating inside the library's directory and executing:
sudo python setup.py install
See example of usage in the examples folder.
Ballarat Hackerspace Inc. invests time and resources providing this open source code, please support Ballarat Hackerspace and open-source hardware by becoming a member/sponsor!
Written by Ian Firns for Ballarat Hackerspace Inc.
MIT license, all text above must be included in any redistribution