🐍 EDGE computing for gateway devices MQTT for testes, productions and debugging embedded systems and outhers

Like ESP WIFI modules, microcontrollers, Linux serial console etc.

With this program it's possible to save logs from different serial ports just by configuring the JSON file (config.json), the number of ports and unlimited and each process for processing and saving the logs is with you on separate instances and threads.

Setup config file

To find the tty port associated with your microcontroller using the ls /dev/serial/by-path command, follow these steps:

1. Connect your microcontroller to the computer via the serial port;
2. Open a terminal and execute the command ls /dev/serial/by-path to list the available serial devices;
3. Look at the list to identify the device associated with your microcontroller. Typically, the name of the symbolic link includes information about the manufacturer or model of the device;
4. Fill in the serialid parameter of the devices in the config.json file with the following path: /dev/serial/by-path/<id-returned-by-previous-command>

By using this path to access the serial device instead of the port number (e.g., /dev/ttyACM0), the operating system will always point to the correct device, regardless of how many times the microcontroller is disconnected and reconnected.

Interface	Description	Configuration Example	Communication Directions	Implementations Status
Serial-to-File	Serial communication interface for saving data locally.	json { "serialport": "...", "baudrate": 115200, "timeout": 5, ... }	Unidirecional	Implemented
Serial-to-MQTT	Converts serial data to MQTT messages. MQTT setup is mandatory.	json { "server_mqtt": { "username": "...", "password": "...", "server": "...", "port": 1883, "subscribe-upstream": "...", "subscribe-downstream": "..." } }	Bidirecional	Implemented
Bluetooth-GPS	Connects GPS devices via Bluetooth.	json { "address": "...", "port": 1, "samplingSeconds": 1, ... }	Unidirecional	Implemented
Bluetooth-BLE	Connects BLE devices via Bluetooth Low Energy.	json { "address": "...", "port": 1, "samplingSeconds": 1, ... }	Unidirecional	Implemented
Others	Unspecified interfaces causing exceptions for invalid devices.	No specific configuration example provided.	Unidirecional	Implemented

Using file config.json for configuration for one or multiple serial ports:

Example multiples interfaces and serial ports:

{
  "server_mqtt": {
    "username": "username",
    "password": "password",
    "server": "url",
    "port": 1883,
    "subscribe-upstream": "topic/to/send/data",
    "subscribe-downstream": "topic/to/receive/data"
  },
  "devices": [
    {
      "serialport": "/dev/serial/by-path/pci-0000:00:14.0-usb-0:2:1.0",
      "baudrate": 115200,
      "timeout": 5,
      "description": "Arduino",
      "interface": "serial-to-file"
    },
    {
      "serialport": "/dev/serial/by-path/pci-0000:00:14.0-usb-0:1:1.0-port0",
      "baudrate": 115200,
      "timeout": 5,
      "description": "NodeMCU",
      "interface": "serial-to-file"
    },
    {
      "address": "54:43:B2:8A:11:26",
      "port": 1,
      "samplingSeconds": 1,
      "description": "AGP",
      "interface": "bluetooth-gps"
    },
    {
      "address": "E8:31:CD:5C:AC:B2",
      "port": 1,
      "samplingSeconds": 1,
      "description": "DBG",
      "interface": "bluetooth-gps"
    },
    {
      "address": "E8:31:CD:5C:AC:B2",
      "port": 1,
      "samplingSeconds": 1,
      "description": "Logs from BLE",
      "interface": "bluetooth-BLE"
    },
    {
      "serialport": "/dev/serial/by-id/usb-Silicon_Labs_CP2104_USB_to_UART_Bridge_Controller_01B970A5-if00-port0",
      "baudrate": 115200,
      "timeout": 5,
      "description": "Emulate-payload",
      "interface": "serial-to-mqtt"
    }
  ]
}

Note: To commit a new config.json file as example execute: git update-index --no-assume-unchanged config.json, commit changes and execute again: git update-index --assume-unchanged config.json

Note: The capacity of the data logger depends only on the CPU and disk IO speeds!

🚀 Run the application

Create a virtual environment to isolate our package dependencies locally (first run time)

python3 -m venv env

source env/bin/activate

On Windows use:

`env\Scripts\activate`

Install dependencies:

pip install -r requirements.txt

To run the application, simply execute:

python src/main.py

💻 Install as a service

To install the app as a service, just run:

cd services && sudo chmod +x install.sh && sudo ./install.sh

Verify service in realtime

journalctl -u datalogger.service -f

or last logs

journalctl --unit=datalogger.service -n 100 --no-pager

Uninstalling

sudo ./uninstall.sh

---

👷 Development

Install pre-commit for automatic code verifications

pip install pre-commit

pre-commit --version

pre-commit run --all-files

Install the git hook scripts

pre-commit install

---

🧪 Testing

If you're looking to run a program to send data via serial to your microcontroller, check out the example/arduino directory in this repository. You'll find a simple PlatformIO project that provides tests for sending data over serial communication with an Arduino microcontroller. Simply navigate to the example/arduino directory in this repository and run the project with PlatformIO to get started.

---

Troubleshooting

If you are not running "pybluez", install the following dependencies:

sudo apt-get install bluetooth libbluetooth-dev

For scan bluetooth devices:

bluetoothctl