JOURNEYS - BIG-IP upgrade and migration utility

Description

JOURNEYS is an application designed to assist F5 Customers with migrating a BIG-IP configuration to a new F5 device and enable new ways of migrating.

Supported journeys:

Full Config migration - migrating a BIG-IP configuration from any version starting at 11.5.0 to a higher one, including VELOS and rSeries systems.
Application Service migration - migrating mission critical Applications and their dependencies to a new AS3 configuration and deploying it to a BIG-IP instance of choice.

Read also the Journeys App solution overview on the F5.com page.

Journey: Full Config migration

Supported features:

Loading UCS or UCS+AS3 source configurations
Flagging source configuration feature parity gaps and fixing them with provided built-in solutions
Load validation
Deployment of the updated configuration to a destination device, including VELOS and rSeries VM tenants
Post-migration diagnostics
Generating detailed PDF reports at every stage of the journey

Full config BIG-IP migrations are supported for software paths according to the following matrix:

				DEST
	X	11.x	12.x	13.x	14.x	15.x	16.x	17.x
	<11.5	X*	X	X	X^	X^
	12.x		X	X	X	X^
SRC	13.x			X	X	X
	14.x				X	X	X
	15.x					X	X	X
	16.x						X**	X
	17.x							X

X^ - an exception compared to the supported upgrade paths listed in the official document K13845 (upgrade allowed only if the source configuration is upgraded to the latest available maintenance release).

X* - while an upgrade to a 11.x destination system is technically supported on BIG-IP, JOURNEYS does not support deployments to systems runnig these versions due to a lack of platform-migrate ucs load option (introduced in 12.1.3).

X** - not supported on rSeries or VELOS platforms.

WARNING: Migrating Application Services using keys stored in FIPS cards is not supported at the moment, unless the user can restore the FIPS keys with the original (non-fips) ones on the destination platform.

Known parity gaps

JOURNEYS finds the following configuration elements in the source configuration, which are no longer supported by the BIG-IP running on the destination platform. For every incompatible element found, there will be one or more automatic possible solutions provided.

Common issues

CompatibilityLevel - BIG-IP devices are divided into three categories/levels based on hardware DoS and sPVA related capabilities. Some devices currently do not have hardware support for features included in levels 1 and 2, so some modifications might be necessary if the source device had one of these categories. For more details about compatibility levels, see here.
Details
- JOURNEYS issue ID: CompatibilityLevel
- Affected VELOS versions: BIG-IP TMOS <15.1.4 and F5OS-C <1.2.0
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: BIG-IP TMOS <15.1.8 and F5OS-A <1.3.0
- Available mitigations:
  - (default) Set the device compatibility level to level supported by destination BIG-IP platform. Possible scenarios:
    - Set the device compatibility level to 0
      
      Adjust the level value in the configuration object sys conmpatibility-level to 0
      
      Enforce software processing of the DoS protection feature by setting an appropriate BigDB database value
      
      Decreasing compatibility from level 2 to level 0 requires removal dos network-whitelist if it's declaration contains field extended-entries
    - Set the device compatibility level to 1
      
      Adjust the level value in the configuration object sys conmpatibility-level to 1
      
      Decreasing compatibility from level 2 to level 1 requires removal dos network-whitelist if it's declaration contains field extended-entries
    - Set the device compatibility level to 2 (non-VELOS or rSeries)
      
      Adjust the level value in the configuration object sys conmpatibility-level to 2
MGMT-DHCP - for F5OS tenants (VELOS, rSeries) and vCMP guests, a static IP address is defined when the tenant is deployed, therefore DHCP needs to be disabled.
Details
- JOURNEYS issue ID: MGMT-DHCP
- Available mitigations:
  - (default) Disable management DHCP
    - Set the sys global-settings mgmt-dhcp value to disabled
Syslog - solves syslog configuration parsing error possible during an upgrade to a destination BIG-IP with version 13.1.0 or higher.
Details
- JOURNEYS issue ID: Syslog
- Available mitigations:
  - (default) Adjust sys syslog configuration depending on source version
    - Change all characters [ to \\[ in field include (source version 12.1.5 or higher)
    - Change all characters [ to \\\\[ in field include (source version lower than 12.1.5)
  - Delete unsupported object
    - Remove sys syslog object containing improperly escaped [ in section include
TRUNK - for F5OS tenants (VELOS, rSeries) and vCMP guests, trunks are defined at the F5OS platform layer or vCMP host layer and not within the tenant or guest. Trunks (Link Aggregation Groups in F5OS) are pre-defined in the F5OS platform layer and VLANs are inherited by the tenant. Additionally, on VE BIG-IPs LACP is not supported.
Details
- JOURNEYS issue ID: TRUNK
- Affected BIG-IP TMOS versions: all
- Available mitigations:
  - (default for VELOS/rSeries/vCMP guests) Delete unsupported objects
    - Remove any net trunk configuration objects
  - (default for VE BIG-IPs) Disable LACP
    - Set any found lacp field value in net trunk configuration objects to disabled

Velos and rSeries specific issues

AAM - Application Acceleration Manager is not supported on VELOS and rSeries platforms.
Details
- JOURNEYS issue ID: AAM
- Affected BIG-IP TMOS versions: all
- Available mitigations:
  - (default) Delete unsupported objects
    - Find any ltm policy objects used in virtuals used inside wam applications. Remove policies which contain a wam enable clause
    - In the same virtuals, remove any profiles of type web-acceleration
    - Deprovision the am module
CGNAT - CGNAT (Carrier Grade NAT) is not supported on this software version.
Details
- JOURNEYS issue ID: CGNAT
- Affected VELOS versions: BIG-IP TMOS <15.1.4 and F5OS-C <1.2.0
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: BIG-IP TMOS <15.1.8 and F5OS-A <1.4.0
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any of the following configuration objects: ltm lsn-pool, ltm profile pcp, ltm virtual with lsn type and any references to them
    - Disable the cgnat feature module
ClassOfService - CoS or DSCP (Differentiated Services Code Point) is not currently supported on this software version.
Details
- JOURNEYS issue ID: ClassOfService
- Affected BIG-IP TMOS versions: all
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any of the following configuration objects: net cos
DoubleTagging - indicates support for the IEEE 802.1QinQ standard, informally known as Double Tagging or Q-in-Q, is not currently supported on this software version. More info on the feature can be found here.
Details
- JOURNEYS issue ID: DoubleTagging
- Affected BIG-IP TMOS versions: all
- Available mitigations:
  - (default) Delete unsupported parameters
    - Remove any customer-tag entries in net vlan objects
DeviceGroup - Device Groups are fully supported on VELOS/rSeries tenants. However, when doing a UCS migration using Journeys, the device group needs to be removed from it to prevent configuration load errors and then re-configured manually once the migrated UCS is loaded on the target platform.
Details
- JOURNEYS issue ID: DeviceGroup
- Affected BIG-IP TMOS versions: all
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any cm device-group configuration objects and any references to them
FixLL - F5OS tenants currently do not yet support the guaranteed flow acceleration and collision avoidance the that FIX Low Latency License provides.
Details
- JOURNEYS issue ID: FIXLL
- Affected VELOS versions: all
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: F5OS-A <1.4.0
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any of the following configuration objects: ltm profile fix and any references to them
    - Remove any irules containing any of the following FIX keywords: FIX_HEADER, FIX_MESSAGE, FIX:: and any references to them
HTTP3 - Due to a BIG-IP 15.1.5 bug, virtuals containing HTTP3 profiles might fail to load.
Details
- JOURNEYS issue ID: HTTP3
- Affected BIG-IP TMOS versions: <15.1.6
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any ltm virtual objects containing references to http3 or quic profiles and any references to them.
MTU - F5OS tenants below version 15.1.5.1 does not support jumbo frames.
Details
- JOURNEYS issue ID: MTU
- Affected BIG-IP TMOS versions: <15.1.5.1
- Available mitigations:
  - (default) Change MTU values to the maximum allowed
    - Set any found MTU values in net vlan configuration objects to 1500
PEM - although keeping the PEM configuration in the configuration files will not cause load errors (it will be discarded when loading the UCS), as for now PEM is not supported in this software version. Journeys removes PEM elements from the configuration to avoid confusion.
Details
- JOURNEYS issue ID: PEM
- Affected VELOS BIG-IP versions: 14.1.x
- Affected rSeries BIG-IP versions: all
- Available mitigations:
  - (default) Remove unsupported objects
    - Disable provisioning of the PEM module
    - Remove any non-default configuration objects from the pem module
    - Remove any iRules using the following PEM-specific expressions: CLASSIFICATION::, CLASSIFY::, PEM::, PSC::
RoundRobin - Round Robin DAG configuration is not currently supported on this software version.
Details
- JOURNEYS issue ID: RoundRobin
- Affected BIG-IP TMOS versions: all
- Available mitigations:
  - (default) Remove unsupported objects
    - On VELOS: Remove all settings other than dag-ipv6-prefix-len from the net dag-globals configuration object
    - on rSeries: Remove all settings from the net dag-globals configuration object
SPDAG - source/destination DAG (Service provider DAG) is not supported in this software version.
Details
- JOURNEYS issue ID: SPDAG
- Affected VELOS versions: BIG-IP TMOS <15.1.4 and F5OS-C <1.2.0
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: BIG-IP TMOS <15.1.8 and F5OS-A <1.3.0
- Available mitigations:
  - (default) Set unsupported vlan parameters to default
    - Change cmp-hash values in all net vlan configuration objects to default
  - Remove all vlans having unsupported parameters
    - Remove all vlans having non-default cmp-hash values, as well as any references to them
sPVA - some security Packet Velocity Acceleration (PVA) features do not have hardware support in this software version - these either must be removed or set to use software mode.
Details
- JOURNEYS issue ID: sPVA
- Affected VELOS versions: BIG-IP TMOS <15.1.4 and F5OS-C <1.2.0
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: BIG-IP TMOS <15.1.8 and F5OS-A <1.3.0
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove address-lists defined in any security dos network-whitelist configuration objects
    - For any of the removed fields above, remove any referring top level address-list objects
    - Set sys compatibility-level to 0
  - Set the device compatibility level to 1
    - Adjust the level value in the configuration object sys conmpatibility-level to 1
    - Enforce software processing of the DoS protection feature by setting an appropriate BigDB database value
STP - stp is not supported in this software version.
Details
- JOURNEYS issue ID: STP
- Affected VELOS versions: all
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: all
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any net stp-globals and net stp configuration objects
Tunneling - While they won't cause UCS load errors, tunneling protocols such as VXLAN, IPSEC, GTP-U, GRE, NVGRE are not optimal in this software version due to the lack of hardware support for DAG on tunnel frames using inner header info. Traffic will not be distributed across all the available TMMs due to inefficient disaggregation, affecting performance.
Details
- JOURNEYS issue ID: Tunneling
- Affected VELOS versions: BIG-IP TMOS <15.1.4 and F5OS-C <1.2.0
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: BIG-IP TMOS <15.1.8 and F5OS-A <1.3.1
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any of the following configuration objects: net tunnels and any references to them.
VirtualWire - the virtual-wire feature is not supported in this software version.
Details
- JOURNEYS issue ID: VirtualWire
- Affected VELOS versions: all
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: all
- Available mitigations:
  - Migrate a classic BIG-IP platform to rSeries or VELOS:
    1. Create a corresponding network configuration on your target platform, which includes VLANs and a Virtual Wire.
    2. Create a tenant with your chosen TMOS BIG-IP image on the target platform, but do not add VLANs or a Virtual Wire.
    3. Save the UCS file with the configuration of the old BIG-IP platform.
    4. Use the Journeys app to migrate the UCS file to the new VELOS or rSeries platform. (Journeys from app here: https://github.com/f5devcentral/f5-journeys.)
    5. Load the UCS onto the tenant created in step 2.
    6. Add VLANs and a Virtual Wire to the tenant with the loaded configuration from the UCS file on the rSeries or VELOS controller.
  - Remove any net trunk configuration objects
VlanGroup - vlan-groups aren't supported in this software version and will be defined at the F5OS layer when supported.
Details
- JOURNEYS issue ID: VlanGroup
- Affected VELOS versions: BIG-IP TMOS <15.1.5 and F5OS-C <1.5.0
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: BIG-IP TMOS <15.1.5 and F5OS-A <1.1.0
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any net vlan-group configuration objects
VLANMACassignment - solves an issue with mac assignment set to vmw-compat that can happen when migrating from a BIG-IP Virtual Edition.
Details
- JOURNEYS issue ID: VLANMACassignment
- Affected VELOS versions: all
- Affected rSeries versions:
  - r2000/r4000 Series: none
  - r5000/r10000 Series: all
- Available mitigations:
  - (default) Modify unsupported value to unique
    - Set the share-single-mac value in ltm global-settings and the respective BigDB database value to unique
  - Modify unsupported value to global
    - Set the share-single-mac value in ltm global-settings and the respective BigDB database value to global
WildcardWhitelist - a part of sPVA - extended-entries field in network-whitelist objects is not supported in this software version.
Details
- JOURNEYS issue ID: WildcardWhitelist
- Affected VELOS versions: BIG-IP TMOS <15.1.4 and F5OS-C <1.2.0
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: BIG-IP TMOS <15.1.8 and F5OS-A <1.3.0
- Available mitigations:
  - (default) Delete unsupported objects
    - Remove any security network-whitelist objects containing an extended-entries key
IpPort - Hardware acceleration of the Ip Port, hash setting is not supported in this software version, enabling it may increase CPU utilization up to 20%.
Details
- JOURNEYS issue ID: IpPort
- Affected VELOS versions: BIG-IP TMOS <15.1.4 and F5OS-C <1.2.0
- Affected rSeries versions:
  - r2000/r4000 Series: all
  - r5000/r10000 Series: BIG-IP TMOS <15.1.8 and F5OS-A <1.3.0
- Available mitigations:
  - (default) Set unsupported vlan parameters to default
    - Change cmp-hash values in all net vlan configuration objects to default

JOURNEYS does not support feature parity gaps that:

Reside outside a UCS archive to be migrated, e.g. in a host UCS (not in a guest UCS):
- Crypto/Compression Guest Isolation - Dedicated/Shared SSL-mode for guests is not supported on VELOS and rSeries. Feature details.
- Traffic Rate Limiting (affects vCMP guests only) - assigning a traffic profile for vcmp guests is currently not supported on VELOS and rSeries tenants.
Do not cause any config load failures on destination devices:
- Secure Vault - keys will be instead stored on the tenant file system.
- Several sPVA features which do not support hardware processing, where software support will occur instead (DDoS HW Vectors (Device and VS), Device/VS Block List, Device Vector Bad Actor (Greylist))
- Wildcard SYN cookie protection - as above, software processing will replace hardware one.
- HTTP3 - F5OS tenants currently provide only experimental support for this feature.

BIG-IP Prerequisites

Mandatory steps before running Full Config migration in JOURNEYS:

Master key transfer - to allow handling encrypted objects, before running JOURNEYS, you need to set a device master key password on both Source and Destination Systems. There are two ways to do this:
1. Copy the Source System master key with f5mku and re-key master key on the Destination System:
  
  Important: Whenever possible, use the documented tmsh commands for master and unit key manipulation. Only use the f5mku command with assistance from F5 Support when no tmsh commands exist to perform the task you want.
  - Obtain the master key from the Source System by entering the following commands:
```
f5mku -K
```
    and copy the output. The command output appears similar to the following example:
```
oruIVCHfmVBnwGaSR/+MAA==
```
  - Install the master-key that you copied in the previous step to the Destination System using the following syntax:
```
f5mku -r <key_value>
```
2. Set master-key password before saving the source UCS file
  - Set the device master key password on the Source System by entering the following commands (remember this password because you'll need to use the same password on the destination device)
```
tmsh modify sys crypto master-key prompt-for-password
tmsh save sys config
```
  - Set the master key password on the Destination System by entering the following commands, using the password remembered in the previous step:
```
tmsh modify sys crypto master-key prompt-for-password
tmsh save sys config
```
For more details, please refer to:
- Platform-migrate option overview: K82540512
- Installing UCS files containing encrypted passwords or passphrases: K9420
SSH public keys migration
- SSH public keys for passwordless authentication may stop work after UCS migration, since the UCS file may not contain SSH public keys for users.
- If the version is affected by the problem, then:
  - all key files have to be migrated manually from the Source System to the Destination System
  - /etc/ssh directory has to be added to the UCS backup configuration of the Source System
- For more details on how to manually migrate SSH keys and verify if your version is affected by the problem, please read:
  - K22327083: UCS backup files do not include the /etc/ssh/ directory https://support.f5.com/csp/article/K22327083
  - K17318: Public key SSH authentication may fail after installing a UCS https://support.f5.com/csp/article/K17318
  - K13454: Configuring SSH public key authentication on BIG-IP systems (11.x - 15.x) https://support.f5.com/csp/article/K13454
Destination System preparation for JOURNEYS
1. Destination BIG-IP should be in Active state.
2. If migrating from BIG-IP 14.0.x or lower, ensure that mgmt-dhcp value in sys global-settings on the Destination System is set to either disabled or enabled. Any other values - namely dhcpv4 and dhcpv6, available starting at 14.1.0 - will cause an error during configuration loading.
3. VLANs, trunks and interfaces should already be configured on vCMP, rSeries and VELOS systems. For more details, please refer to: Platform-migrate option overview: K82540512.
  For VELOS or rSeries tenant configuration, find more information on F5OS CLI.
  VLANs and trunks creation example:
```
config
vlans vlan 1000 config name Vlan1000 vlan-id 1000
vlans vlan 1001 config name Vlan1000 vlan-id 1001
vlans vlan 1002 config name Vlan1000 vlan-id 1002
top
interfaces interface 1.0 ethernet switched-vlan config trunk-vlans 1000
interfaces interface 1.0 ethernet switched-vlan config trunk-vlans 1001
interfaces interface 1.0 ethernet switched-vlan config trunk-vlans 1002
commit
end
```
FIPS/NetHSM keys migration
- Keys stored in FIPS/NetHSM will not be migrated, since the UCS file does not contain keys of these types.
- If FIPS/NetHSM keys are in use by the platform, then:
  - all key files have to be migrated manually from the Source System to the Destination System
- For more details on how to manually migrate keys stored in FIPS/NetHSM, please read:
  - FIPS keys migration
  - NetHSM keys migration

BIG-IP account prerequisites

To ensure all JOURNEYS features work properly, an account with Administrator role and advanced shell (bash) access is required on both source and target hosts. It can be root or any other account. For auditing purposes, a separate account for migration might be desired.

IMPORTANT: Due to the above, certain features of JOURNEYS - specifically the ones requiring ssh access to the machine - are not available on BIG-IPs running in the Appliance mode. The user will be required to perform manual variants of these steps instead.

Journey: Application Service Migration

Supported features:

Loading UCS source configurations.
Grouping Virtuals into Applications and Tenants, basing on internal dependencies and set preferences.
Configuration editor for Virtuals with an easy access to updated AS3 conversion previews.
Converting selected applications into a deployable AS3 declaration using f5-automation-config-converter.
Deployment of the updated configuration to a specified destination device via AS3.
Post-migration diagnostics.

Configuration object grouping

Virtual - smallest object recognized by JOURNEYS. It includes a single ltm virtual-server (represented by a Service in AS3) object and any others referenced by it directly or indirectly - monitors, pools, profiles, etc.
Application - A group of AS3 objects, including the virtual mentioned above. Logic for initial grouping of virtuals into apps can be manually set via preferences in GUI before loading the ucs. Represented by folders on the BIG-IP level.
Tenant - A group of AS3 applications. By default JOURNEYS creates one tenant per application. Common is a special reserved name, representing objects shared between tenants. Represented by partitions on the BIG-IP level.

Application conversion status

Each virtual separately gets assigned a status based on the f5-automation-config-converter response. Possible statuses are as follows:

Green - All virtual objects appear to convert properly.
Red - Virtual configuration includes some objects that are currently marked as as3NotConverted by f5-automation-config-converter, and are considered undeployable.
Black - Error during a virtual config conversion attempt.

Note: If one or more of your apps have a red or black status, you may attempt to use a newer version of f5-acc-config-converter by editing the image version inside the docker-compose.yml file. Otherwise, please open an issue on f5devcentral and include configuration contents from the problematic app.

Additional notes

Deployable objects

Not all required configuration files can be included inside the resulting AS3 json, and need to be installed on the Destination System prior to sending the declaration itself.

If deploying manually, JOURNEYS will prepare a package containing all of the required files alongside with a list of commands to perform on the Destination System.

If deploying via JOURNEYS, the application will install the files automatically.

Known issues

JOURNEYS does not support keys generated using a physical FIPS card or NetHSM. If there are any applications referring to these keys, deployment of them will fail. For more info about keys migration read: FIPS/NetHSM keys migration

Configuration Migration Considerations

BIG-IP device swap

To minimize downtime, F5 recommends deploying the new hardware alongside existing BIG-IP deployment.

F5 recommends the following procedure for moving production traffic to a new device:

Deploy the target device, trying to keep physical connections as close as possible to the old BIG-IP (respective interfaces assigned to the same physical networks)
Remove interfaces to existing VLANs on the new hardware (this will impact all tenants on VELOS/rSeries/vCMP guests).
There are three options to do this:
1. Disabling interfaces.
2. Physically unplugging the network cables.
3. Disabling the port on the switch connected to the destination platform.
Deploy JOURNEYS-generated config to a new BIG-IP. Note that some validators like LTM module comparison are expected to fail as Virtual Servers will be down.
If the configuration was deployed successfully, review the system status. If the status is "REBOOT REQUIRED", perform the reboot before shutting down interfaces on the old BIG-IP system.
If you use BIG-IQ, refer to the article K15938 to discover your new BIG-IP device.
Shutdown interfaces on the old BIG-IP system (this will impact all source BIG-IPs).
There are three options to do this:
1. Disabling interfaces.
2. Physically unplugging the network cables.
3. Disabling the port on the switch connected to the old BIG-IP system.
Re-add interfaces to existing VLANs on the new hardware (this will impact all tenants on VELOS/rSeries/vCMP guests).
There are three options to do this:
1. Re-enable interfaces on the destination platform.
2. Physically unplug the network cables on the source platform, plug the network cables on the destination platform.
3. Enable the port on the switch connected to the destination platform.

SPDAG/VlanGroup mitigation

If SPDAG or VlanGroup removal mitigation is applied, and a conflicted object is configured on a Virtual Server, JOURNEYS will remove all VLANs assigned for that particular Virtual Server - not only the conflicted one. This is done to ensure that JOURNEYS does not produce an invalid configuration (Virtual Servers cannot share identifiers, as they need to be unique).

Rebuilding device trust:

During migration JOURNEYS will reset the device trust.
F5 reccomends one of the following procedures to rebuild the device trust:

K40832524: Rebuilding device trust using tmsh (11.x - 16.x)
https://support.f5.com/csp/article/K40832524
K42161405: Rebuilding device trust using the Configuration utility (11.x - 16.x)
https://support.f5.com/csp/article/K42161405

Restoring backup UCS in case of migration failure

Deployment progress can be tracked on the Summary page. If UCS load fails, it is strongly advised to manually load the backup UCS archive created during the deployment process before any other action is taken on the Destination System.

Log to the Destination System:
```
ssh username@<destination-system-ip>
```
Use the command to load the backup UCS:
```
tmsh load sys ucs <backup_ucs_name*>
```
*The backup UCS archive name is displayed on the Summary page in the Detailed Results in a log entry that should look as follows:
```
Create backup of the Destination System: /var/local/ucs/journey_ucs_backup_20211012-103937.ucs
```

JOURNEYS Setup Requirements

Install Docker
Install Docker Compose
- Other alternatives like Podman combined with Podman Compose might be viable, but they were not tested

NOTE: We recommend to use V2 of docker compose as V1 is deprecated, therefore rest of this guide assumes you are using V2 of docker compose.

System requirements

If you are running Journeys App in a VM, F5 recommends using Ubuntu Desktop (but also other Linux distributions are supported: RHEL/CentOS etc.) with at least 25 GB of free hard drive space. Make sure you do not have an HTTP server installed as it might interfere with Journeys App. Having more resources might be helpful when attempting to parse very complex UCS archives.

JOURNEYS Installation

Fetching JOURNEYS

git clone https://github.com/f5devcentral/f5-journeys.git
cd f5-journeys

Airgapped installation using a bundle

Download the bundle and the checksum file from Releases or from MyF5 using a device with internet access.
Check the checksum file from the downloaded bundle, see examples for Linux:

sha512sum -c f5-journeys-bundle-v4.1.0.tgz.sha512

or:

md5sum -c f5-journeys-bundle-v4.1.0.tgz.md5

Note: Do not use the application if the message digest does not match the downloaded file.

(optional): Upload the file to target device using your preferred method.
Unpack the archive content, for example:

tar zxvf f5-journeys-bundle-v4.1.0.tgz
cd f5-journeys

Import containers into Docker or other container runtime using following script:

./install.sh

Continue directly to steps 1-2 and 6-7 in Preparing the environment.

Preparing the environment

Create a directory for all of JOURNEYS operations - modifying configs, logging, etc.

You can use any directory in place of /tmp/journeys.
```
mkdir /tmp/journeys
```
Note: keep in mind that the default migration directory is placed in the /tmp directory, which is cleaned up upon a system reboot. If longer session persistence is required, please modify this directory path via the .env file to a non-temporary one.
Prepare an environment file for docker-compose
```
cp sample.env .env
```
If you are using a different working directory than the one shown in the point above, WORKING_DIRECTORY variable has to be updated in the .env file. Its value should be an absolute path pointing to your custom directory.
Fetch services included in the docker-compose configuration file
```
docker compose pull
```

Print sha digest of downloaded images

docker image ls f5devcentral/f5-bigip-journeys-app --digests

Examine if image listed in docker-compose journeys/celery-worker has exactly the same digest that can be found on docker hub repository with the same tag
```
https://hub.docker.com/r/f5devcentral/f5-bigip-journeys-app/tags?page=1&ordering=last_updated
```
Note: do not use the application if digests does not match.
Start services included in the docker-compose configuration file
```
docker compose up -d
```
Note: services included in the default docker-compose.yaml file do not allow usage of the perapp functionalities. To use them, please refer to perapp section.

Note: for security reasons, not all the ports in docker-compose.yaml are open to the public, such as Redis(6379). To debug Redis, please modify the docker-compose.yaml file to add ports: exposing session and run the up command again.
Open your web browser, navigate to:
```
https://localhost:8443
```
and accept self-signed cert to run the application. The certificate itself can be verified by comparing it with the one logged by the main JOURNEYS container.
```
docker logs f5-journeys_journeys-1 2>&1 | grep 'BEGIN CERTIFICATE'
```
if the above command returns that no container has been found look for the name of deployment container like so
```
docker ps
```
and replace the journeys container name with the one you have found with the docker ps command
```
docker logs <your journeys container name> 2>&1 | grep 'BEGIN CERTIFICATE'
```

JOURNEYS Update

To update Journeys to the latest version, run the following commands.

Clean up the old working directory. Sometimes leftover data might not be compatible with new Journeys version.
```
rm -rf /tmp/journeys  # or whichever folder you specified in the .env file
mkdir /tmp/journeys
```
Ensure that your current .env file contains all keys present in the sample.env file. If not, copy/enter them.
Bring down the old containers, pull the newest changes and start the services again.
```
docker compose down
git pull
docker compose up -d
```

Older images may then be viewed and removed using the following commands.

docker images | grep journeys
docker rmi <image_name>:<version>

JOURNEYS API

An API is exposed by the main journeys container (by default on port 8443). Available endpoints are shown in the openapi-schema.yaml file, which can also be imported in a tool like Postman or Swagger UI for easier exploring and/or usage.

Known API issues

Attempting to call an invalid endpoint will return a broken html with a 200 code rather than a 404 error one.

Feature details

Diagnostics

Upon deployment of UCS to the Destination System, user will be prompted to select several diagnose methods. These collect information relevant to your system condition and compare its state and configuration with the Source BIG-IP System.

Please keep in mind that only a few of the diagnostics methods can be run without providing a Source System. If the UCS was provided manually and no such system was provided, unavailable options will be locked out.

IMPORTANT: User will always be prompted for source and destination credentials right before deployment even if Source System is offline. Destination credentials are valid before loading UCS archive on the target system. Once the UCS is loaded, source credentials (stored at UCS archive provided by a user or downloaded from the Source System) are required to log in.

Details of the diagnostic checks can be evaluated in a resulting pdf report.

Diagnose methods

MCP status check

Area: error detection

Checks if values of returned fields are correct. This method uses tmsh show sys mcp-state field-fmt that can be executed manually.
TMM status

Area: resource management

Function logs status of TMM. Requires manual evaluation.
Prompt state

Area: error detection

Checks if prompt state is in active mode.
Core dumps detection

Area: error detection

Checks if diagnostic core dumps were created.
Database Comparison

Area: config migration

Compares two system DBs getting them from iControl endpoint for sys db. Requires manual evaluation.
Memory footprint Comparison

Area: information, resource management

Compares information from tmsh show sys provision for both systems. Requires manual evaluation.
Version Comparison

Area: information

Compares information from tmsh show sys version for both systems. Requires manual evaluation.
Local Traffic Manager (LTM) module comparison checks

Area: config migration, resource management

Check lists of all defined LTM nodes and Virtual Servers configured in the new system. If both devices are on-line, it will check conformance of both configuration and resource availability. Requires manual evaluation.
Log Watcher check

Area: error detection

Log watcher checks the difference in log files before and after UCS deployment. This check looks for "ERR" and "CRIT" phrases (case-insensitive) that might appear in logs during the deployment. Current scope of log file lookup:
- /var/log/ltm"
- /var/log/apm"
- /var/log/gtm"
- /var/log/tmm"
- /var/log/liveinstall.log
- /var/log/asm"
- /var/log/ts/bd.log
- /var/log/ts/asm_config_server.log
- /var/log/ts/pabnagd.log
- /var/log/ts/db_upgrade.log
- /var/log/daemon.log
- /var/log/kern.log
- /var/log/messages
The log watcher output only includes these files, which appear on your system and are provisioned. Sample output:
```
Log watcher output:
{
   "/var/log/ltm": [],
}
```
Empty list as a value means no lines containing phrases "ERR" and "CRIT" were found. However, there may be information about potential problems in logs. Therefore, this check requires manual evaluation.
Ciphersuites check

Area: information

Compares information about ciphersuites for both systems. Requires manual evaluation.
Cron entries check

Area: error detection

Compares cron data between Source and Destination Systems, checking for any unexpected changes.
Platform migrate ignored objects

Area: information

Lists objects ignored due to the usage of platform migrate ucs load option. Requires manual evaluation.
Services check

Area: error detection

Verifies whether any services on the Destination System are stuck in a restart loop. If they are, attempt to fix the issue by rebooting the device.

WARNING: this check can include a reboot. Using it might significantly increase validation runtime, and can cause unexpected changes on the target device.

Load validation

During the migration process, user will be provided with an option to validate if the configuration being migrated will load on the provided Destination System. This operation utilizes the BIG-IP built in tmsh sys config verify functionality to check whether the Destination BIG-IP finds any errors in the provided files. This module temporarily modifies Destination configuration files for testing purposes. After moving on from this step, the Destination System will be reverted back to its original state.

WARNING: Due to how tmsh sys config verify works, the load validation module has to temporarily heavily modify configuration files on the provided Destination System. For this reason, to avoid any potential loss of data, it is not recommended to use this feature with a device already containing any non-basic configuration.

WARNING: Please make sure the Destination device is licensed and provisioned with modules corresponding to the UCS configuration being migrated.

WARNING: Load validation can produce false positive output if the configuration contains any parts subject to fix-up scripts built into the BIG-IP ucs load process. These fix-ups cannot be automatically incorporated in the validation module.

WARNING: If the configuration to be validated requires specific values in BigDB.dat file, they must be configured on a destination device before performing the validation, otherwise "load validation" may fail.

Load validation functional details

Since the verify command requires an unpacked and ready to load configuration on a live system, this module needs to perform a few preliminary steps before actual validation. The whole process looks as follows:

Modify the configuration files:
- Remove several objects from the net module: interface, stp, vlan, fdb vlan, trunk
- Remove any references to the removed objects
- Disable user session limit
Generate a temporary UCS with the current configuration and upload it to the provided device
Generate a backup UCS
Extract a part of the UCS file on the provided host, including but not limited to:
- Configuration files
- Certificates and keys
- Database files
If the migration includes an AS3 file, check and potentially install the appsvcs package

If the configuration to be validated requires specific values in BigDB.dat, configure them on a destination device. Example:

Destination device (statemirror.secure value "disable" is configured):

[root@localhost:Active:Standalone] config # tmsh list sys db statemirror.secure all-properties
sys db statemirror.secure {
default-value "disable"
scf-config "true"
value "disable"
value-range "disable enable"
}
[root@localhost:Active:Standalone] config #

Load validation error (statemirror.secure value "enable" is required):

01071958:3: Error configuring Virtual Server (/Common/virtual_server_HTTPS). Connection mirroring requires db variable statemirror.secure to be enabled.
Unexpected Error: Validating configuration process failed.

Setting required value of statemirror.secure on the destination device:
```
tmsh modify sys db statemirror.secure value enable
```

Call the tmsh load sys config verify partitions all command and check its output. Additionally, verify whether mcpd is in correct state after this operation.
If the migration includes an AS3 file, send a request with modified declaration having its action set as dry-run and verify the output
- if declaration is AS3 format then only action is changed to dry-run
- if declaration is ADC then AS3 section is added with action dry-run and other required settings https://clouddocs.f5.com/products/extensions/f5-appsvcs-extension/latest/userguide/composing-a-declaration.html

After the validation is complete, the test host is then restored to the original state:

Restore the backup ucs
Remove any files that were extracted from the verified UCS file, but were not present originally on the system
Remove the test UCS

Contributing

See here

Bug reporting and Feature Requests

See here

Name		Name	Last commit message	Last commit date
Latest commit History 61 Commits
.github		.github
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
F5_Contributor_License_Agreement.pdf		F5_Contributor_License_Agreement.pdf
LICENSE		LICENSE
README.md		README.md
SECURITY.md		SECURITY.md
SUPPORT.md		SUPPORT.md
docker-compose.yaml		docker-compose.yaml
install.sh		install.sh
openapi-schema.yaml		openapi-schema.yaml
sample.env		sample.env

License

f5devcentral/f5-journeys

Folders and files

Latest commit

History

Repository files navigation

JOURNEYS - BIG-IP upgrade and migration utility

Contents:

Description

Journey: Full Config migration

Known parity gaps

Common issues

Velos and rSeries specific issues

BIG-IP Prerequisites

BIG-IP account prerequisites

Journey: Application Service Migration

Configuration object grouping

Application conversion status

Additional notes

Deployable objects

Known issues

Configuration Migration Considerations

BIG-IP device swap

SPDAG/VlanGroup mitigation

Rebuilding device trust:

Restoring backup UCS in case of migration failure

JOURNEYS Setup Requirements

System requirements

JOURNEYS Installation

Fetching JOURNEYS

Airgapped installation using a bundle

Preparing the environment

JOURNEYS Update

JOURNEYS API

Known API issues

Feature details

Diagnostics

MCP status check

TMM status

Prompt state

Core dumps detection

Database Comparison

Memory footprint Comparison

Version Comparison

Local Traffic Manager (LTM) module comparison checks

Log Watcher check

Ciphersuites check

Cron entries check

Platform migrate ignored objects

Services check

Load validation

Contributing

Bug reporting and Feature Requests

About

Topics

Resources

License

Security policy

Stars

Watchers

Forks

Languages