Merge pull request #58 from etherkit/v2.1.1

V2.1.1

README.md

@@ -51,7 +51,9 @@ Before you do anything with the Si5351, you will need to include the "si5351.h"
 
 Now in the _Setup()_ function, let's initialize communications with the Si5351, specify the load capacitance of the reference crystal, that we want to use the default reference oscillator frequency of 25 MHz (the second argument of "0" indicates that we want to use the default), and that we will apply no frequency correction at this point (the third argument of "0"):
 
-    si5351.init(SI5351_CRYSTAL_LOAD_8PF, 0, 0);
+    i2c_found = si5351.init(SI5351_CRYSTAL_LOAD_8PF, 0, 0);
+
+The _init()_ method returns a _bool_ which indicates whether the Arduino can communicate with a device on the I2C bus at the specified address (it does not verify that the device is an actual Si5351, but this is useful for ensuring that I2C communication is working).
 
 Next, let's set the CLK0 output to 14 MHz:
 
@@ -277,12 +279,15 @@ Public Methods
  *
  * xtal_load_c - Crystal load capacitance. Use the SI5351_CRYSTAL_LOAD_*PF
  * defines in the header file
- * ref_osc_freq - Crystal/reference oscillator frequency in 1 Hz increments.
+ * xo_freq - Crystal/reference oscillator frequency in 1 Hz increments.
  * Defaults to 25000000 if a 0 is used here.
  * corr - Frequency correction constant in parts-per-billion
  *
+ * Returns a boolean that indicates whether a device was found on the desired
+ * I2C address.
+ *
  */
-void Si5351::init(uint8_t xtal_load_c, uint32_t ref_osc_freq, uint32_t ref_osc_freq)
+bool Si5351::init(uint8_t xtal_load_c, uint32_t ref_osc_freq, uint32_t ref_osc_freq)
 ```
 ### reset()
 ```
@@ -706,6 +711,10 @@ This library does not currently support the spread spectrum function of the Si53
 Changelog
 ---------
 
+* v2.1.1
+
+    * Add bool return value to _init()_ indicating whether a device is on the I2C bus
+
 * v2.1.0
 
     * Add support for reference frequencies and corrections for both the XO and CLKIN

examples/si5351_example/si5351_example.ino

@@ -24,9 +24,15 @@ Si5351 si5351;
 
 void setup()
 {
+  bool i2c_found;
+
   // Start serial and initialize the Si5351
   Serial.begin(57600);
-  si5351.init(SI5351_CRYSTAL_LOAD_8PF, 0, 0);
+  i2c_found = si5351.init(SI5351_CRYSTAL_LOAD_8PF, 0, 0);
+  if(!i2c_found)
+  {
+    Serial.println("Device not found on I2C bus!")
+  }
 
   // Set CLK0 to output 14 MHz
   si5351.set_freq(1400000000ULL, SI5351_CLK0);

library.properties

@@ -1,5 +1,5 @@
 name=Etherkit Si5351
-version=2.1.0
+version=2.1.1
 author=Jason Milldrum <milldrum@gmail.com>
 maintainer=Jason Milldrum <milldrum@gmail.com>
 sentence=A full-featured library for the Si5351 series of clock generator ICs from Silicon Labs

src/si5351.cpp

@@ -36,17 +36,6 @@
 Si5351::Si5351(uint8_t i2c_addr):
 	i2c_bus_addr(i2c_addr)
 {
-	dev_status.SYS_INIT = 0;
-	dev_status.LOL_B = 0;
-	dev_status.LOL_A = 0;
-	dev_status.LOS = 0;
-	dev_status.REVID = 0;
-
-	dev_int_status.SYS_INIT_STKY = 0;
-	dev_int_status.LOL_B_STKY = 0;
-	dev_int_status.LOL_A_STKY = 0;
-	dev_int_status.LOS_STKY = 0;
-
 	xtal_freq[0] = SI5351_XTAL_FREQ;
 
 	// Start by using XO ref osc as default for each PLL
@@ -67,29 +56,53 @@ Si5351::Si5351(uint8_t i2c_addr):
  * Defaults to 25000000 if a 0 is used here.
  * corr - Frequency correction constant in parts-per-billion
  *
+ * Returns a boolean that indicates whether a device was found on the desired
+ * I2C address.
+ *
  */
-void Si5351::init(uint8_t xtal_load_c, uint32_t xo_freq, int32_t corr)
+bool Si5351::init(uint8_t xtal_load_c, uint32_t xo_freq, int32_t corr)
 {
 	// Start I2C comms
 	Wire.begin();
 
-	// Set crystal load capacitance
-	si5351_write(SI5351_CRYSTAL_LOAD, (xtal_load_c & SI5351_CRYSTAL_LOAD_MASK) | 0b00010010);
+	// Check for a device on the bus, bail out if it is not there
+	Wire.beginTransmission(i2c_bus_addr);
+	uint8_t reg_val;
+  reg_val = Wire.endTransmission();
 
-	// Set up the XO reference frequency
-	if (xo_freq != 0)
+	if(reg_val == 0)
 	{
-		set_ref_freq(xo_freq, SI5351_PLL_INPUT_XO);
+		// Wait for SYS_INIT flag to be clear, indicating that device is ready
+		uint8_t status_reg = 0;
+		do
+		{
+			status_reg = si5351_read(SI5351_DEVICE_STATUS);
+		} while (status_reg >> 7 == 1);
+
+		// Set crystal load capacitance
+		si5351_write(SI5351_CRYSTAL_LOAD, (xtal_load_c & SI5351_CRYSTAL_LOAD_MASK) | 0b00010010);
+
+		// Set up the XO reference frequency
+		if (xo_freq != 0)
+		{
+			set_ref_freq(xo_freq, SI5351_PLL_INPUT_XO);
+		}
+		else
+		{
+			set_ref_freq(SI5351_XTAL_FREQ, SI5351_PLL_INPUT_XO);
+		}
+
+		// Set the frequency calibration for the XO
+		set_correction(corr, SI5351_PLL_INPUT_XO);
+
+		reset();
+
+		return true;
 	}
 	else
 	{
-		set_ref_freq(SI5351_XTAL_FREQ, SI5351_PLL_INPUT_XO);
+		return false;
 	}
-
-	// Set the frequency calibration for the XO
-	set_correction(corr, SI5351_PLL_INPUT_XO);
-
-	reset();
 }
 
 /*

src/si5351.h

@@ -280,7 +280,7 @@ class Si5351
 {
 public:
   Si5351(uint8_t i2c_addr = SI5351_BUS_BASE_ADDR);
-	void init(uint8_t, uint32_t, int32_t);
+	bool init(uint8_t, uint32_t, int32_t);
 	void reset(void);
 	uint8_t set_freq(uint64_t, enum si5351_clock);
 	uint8_t set_freq_manual(uint64_t, uint64_t, enum si5351_clock);
@@ -306,8 +306,10 @@ class Si5351
 	uint8_t si5351_write_bulk(uint8_t, uint8_t, uint8_t *);
 	uint8_t si5351_write(uint8_t, uint8_t);
 	uint8_t si5351_read(uint8_t);
-	struct Si5351Status dev_status;
-	struct Si5351IntStatus dev_int_status;
+	struct Si5351Status dev_status = {.SYS_INIT = 0, .LOL_B = 0, .LOL_A = 0,
+    .LOS = 0, .REVID = 0};
+	struct Si5351IntStatus dev_int_status = {.SYS_INIT_STKY = 0, .LOL_B_STKY = 0,
+    .LOL_A_STKY = 0, .LOS_STKY = 0};
 	enum si5351_pll pll_assignment[8];
 	uint64_t clk_freq[8];
 	uint64_t plla_freq;