Skip to content

dycodex/Sodaq_nbIOT

 
 

Repository files navigation

Sodaq_nbIOT

Arduino library for using with the uBlox nbIOT modules.

The firmware version of the module should be >= 06.57,A03.02.

Please check http://support.sodaq.com/sodaq-one/firmware-upgrade/ for the latest firmware.

Usage

Quick example:

#include "Sodaq_nbIOT.h"
#include <Sodaq_wdt.h>

#ifdef ARDUINO_SODAQ_EXPLORER
#define MODEM_ON_OFF_PIN 7
#define MODEM_STREAM Serial
#else
#error "You need to declare the modem on/off pin and stream for your particular board!"
#endif

#define DEBUG_STREAM SerialUSB
#define DEBUG_STREAM_BAUD 115200

const char* apn = "oceanconnect.t-mobile.nl";
const char* cdp = "172.16.14.22";
const char* forceOperator = "20416"; // optional - depends on SIM / network

Sodaq_nbIOT nbiot;

void setup()
{
    DEBUG_STREAM.begin(DEBUG_STREAM_BAUD);
    MODEM_STREAM.begin(nbiot.getDefaultBaudrate());

    nbiot.init(MODEM_STREAM, MODEM_ON_OFF_PIN);
    nbiot.setDiag(DEBUG_STREAM);

    if (nbiot.connect(apn, cdp, forceOperator)) {
        DEBUG_STREAM.println("Connected succesfully!");
    }
    else {
        DEBUG_STREAM.println("Failed to connect!");
        return;
    }

    const char* message = "Hello World!";

    if (!nbiot.sendMessage(message)) {
        DEBUG_STREAM.println("Could not queue message!");
    }
    else {
        DEBUG_STREAM.println("Message queued for transmission!");
    }
}

void loop()
{
}
Method Description
getDefaultBaudRate () Returns the correct baudrate for the serial port that connects to the device.
setDiag (Stream& stream) Sets the optional "Diagnostics and Debug" stream.
init(Stream& stream, int8_t onoffPin) // Initializes the modem instance. Sets the modem stream and the on-off power pins.
overrideNconfigParam(const char* param, bool value) Override a default config parameter, has to be called before connect(). Returns false if the parameter name was not found. Possible values for param are: AUTOCONNECT, CR_0354_0338_SCRAMBLING, CR_0859_SI_AVOID, COMBINE_ATTACH, CELL_RESELECTION and ENABLE_BIP.
isAlive() Returns true if the modem replies to "AT" commands without timing out.
connect(const char* apn, const char* cdp, const char* forceOperator = 0, uint8_t band = 8) Turns on and initializes the modem, then connects to the network and activates the data connection. Returns true when successful.
disconnect() Disconnects the modem from the network. Returns true when successful.
isConnected() Returns true if the modem is connected to the network and has an activated data connection.
sendMessage(const uint8_t* buffer, size_t size) Sends the given buffer, up to "size" bytes long. Returns true when the message is successfully queued for transmission on the modem.
sendMessage(const char* str) Sends the given null-terminated c-string. Returns true when the message is successfully queued for transmission on the modem.
sendMessage(String str) Sends the given String. Returns true when the message is successfully queued for transmission on the modem.
getSentMessagesCount(SentMessageStatus filter) Returns the number of messages that are either pending (filter == Pending) or failed to be transmitted (filter == Error) on the modem.
createSocket(uint16_t localPort = 0) Create a UDP socket for the specified local port, returns the socket handle.
closeSocket(uint8_t socket) Close a UDP socket by handle, returns true if successful.
socketSend(uint8_t socket, const char* remoteIP, const uint16_t remotePort, char* buffer, size_t size) Send a udp payload buffer to a specified remote IP and port, through a specific socket.
socketReceiveHex(char* buffer, size_t length, SaraN2UDPPacketMetadata* p = NULL) Receive pending socket data as hex data in a passed buffer. Optionally pass a helper object to receive metadata about the origin of the socket data.
socketReceiveBytes(uint8_t* buffer, size_t length, SaraN2UDPPacketMetadata* p = NULL) Receive pending socket data as binary data in a passed buffer. Optionally pass a helper object to receive metadata about the origin of the socket data.
getPendingUDPBytes() Return the number of pending bytes, gets updated by calling socketReceiveXXX.
hasPendingUDPBytes() Helper function returning if getPendingUDPBytes() > 0.
ping(char* ip) Ping a specific IP address.
waitForUDPResponse(uint32_t timeoutMS = DEFAULT_UDP_TIMOUT_MS) Calls isAlive() until the passed timeout, or until a UDP packet has been received on any socket.

Contributing

  1. Fork it!
  2. Create your feature branch: git checkout -b my-new-feature
  3. Commit your changes: git commit -am 'Add some feature'
  4. Push to the branch: git push origin my-new-feature
  5. Submit a pull request

License

Copyright (c) 2015-2016 Sodaq. All rights reserved.

This file is part of Sodaq_nbIOT.

Sodaq_nbIOT is free software: you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation, either version 3 of the License, or(at your option) any later version.

Sodaq_nbIOT is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

You should have received a copy of the GNU Lesser General Public License along with Sodaq_nbIOT. If not, see http://www.gnu.org/licenses/.

About

Arduino library for the ublox NB-IoT modules

Resources

Stars

Watchers

Forks

Packages

No packages published

Languages

  • C++ 99.9%
  • Makefile 0.1%