Skip to content

A lightweight plugin to display the list of buffers in the lightline vim plugin

License

Notifications You must be signed in to change notification settings

dkaszews/lightline-bufferline

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

lightline-bufferline

This plugin provides bufferline functionality for the lightline vim plugin.

Table Of Contents

Installation

Installation can be easily done with a plugin manager of your choice. For example vim-plug:

Plug 'mengelbrecht/lightline-bufferline'

Integration

  1. Add 'buffers' to g:lightline.tabline.
  2. Add 'buffers': 'lightline#bufferline#buffers' to g:lightline.component_expand.
  3. Add 'buffers': 'tabsel' to g:lightline.component_type.

The result looks for example like this:

let g:lightline = {
      \ 'colorscheme': 'one',
      \ 'active': {
      \   'left': [ [ 'mode', 'paste' ], [ 'readonly', 'filename', 'modified' ] ]
      \ },
      \ 'tabline': {
      \   'left': [ ['buffers'] ],
      \   'right': [ ['close'] ]
      \ },
      \ 'component_expand': {
      \   'buffers': 'lightline#bufferline#buffers'
      \ },
      \ 'component_type': {
      \   'buffers': 'tabsel'
      \ }
      \ }

If you are using neovim with a lua configuration the above example looks like this:

vim.g['lightline'] = {
  colorscheme = 'one',
  active = {
    left = {{'mode', 'paste'}, {'readonly', 'filename', 'modified'}}
  },
  tabline = {
    left = {{'buffers'}},
    right = {{'close'}}
  },
  component_expand = {
    buffers = 'lightline#bufferline#buffers'
  },
  component_type = {
    buffers = 'tabsel'
  }
}

If you're adding the buffers to the bottom statusbar, the modified indicator will not be updated immediately. To work around this, add this autocmd to your vim config:

autocmd BufWritePost,TextChanged,TextChangedI * call lightline#update()

Configuration

General

g:lightline#bufferline#unnamed

The name to use for unnamed buffers. Default is '*'.

g:lightline#bufferline#margin_left

The number of spaces to add on the left side of the buffer name. Default is 0.

g:lightline#bufferline#margin_right

The number of spaces to add on the right side of the buffer name. Default is 0.

g:lightline#bufferline#reverse_buffers

If enabled the buffers will be displayed in a reversed order. Default is 0 (buffers are not reversed).

g:lightline#bufferline#right_aligned

If the bufferline is used in the right component of the tabline this should be set to 1 to ensure the correct order of the buffers. Default is 0.

g:lightline#bufferline#clickable

If set to 1 the bufferline is clickable when using Neovim versions with tablineat feature. To enable this feature, you must also set the bufferline component to be raw in your vimrc:

let g:lightline.component_raw = {'buffers': 1}

Before the click handler for the buffer is executed a custom event LightlineBufferlinePreClick is emitted. To perform an operation before the buffer is switched via the click handler you can define an autocommand:

autocmd User LightlineBufferlinePreClick :echom "test"

Filename

g:lightline#bufferline#filename_modifier

The filename-modifier applied to each buffer name. Default is ':.'. To see the available options use the command :help filename-modifiers in vim.

g:lightline#bufferline#shorten_path

Defines whether to shorten the path using the pathshorten function. Default is 1.

g:lightline#bufferline#smart_path

If enabled, when two files have the same name the distinguishing sections of each file's path are added. Default is 1.

Indicators

g:lightline#bufferline#modified

The indicator to use for a modified buffer. Default is ' +'.

g:lightline#bufferline#read_only

The indicator to use for a read-only buffer. Default is ' -'.

g:lightline#bufferline#more_buffers

The indicator to use when there are buffers that are not shown on the bufferline because they didn't fit the available space. Default is ....

g:lightline#bufferline#unicode_symbols

Use unicode symbols for modified and read-only buffers as well as the more buffers indicator. Default is 0.

If set to 1 the symbols +, - and ... are replaced by , and .

Note: The symbols are only correctly displayed if your font supports these characters.

More Buffers

g:lightline#bufferline#disable_more_buffers_indicator

Disables the more buffers indicator so that all buffers are always shown on the bufferline even if they don't fit the available space. Default is 0.

g:lightline#bufferline#max_width

The more buffers functionality determines the available space for the bufferline and calculates how many buffers can be shown until the more buffers indicator is displayed. The default function to calculate the available space for the buffers returns the number of columns: &columns. To customize the available space calculation this option can be set to the name of a custom function which will be used instead.

The function receives no parameters and should return the amount of available space for the bufferline. For example if you know that you have exactly 80 columns space for the bufferline you can specify the following function:

function LightlineBufferlineMaxWidth()
  return 80
endfunction

let g:lightline#bufferline#max_width = "LightlineBufferlineMaxWidth"

Numbering

g:lightline#bufferline#show_number

Defines whether to add the buffer number to the buffer name. Default is 0. Valid values are:

  • 0: No numbers
  • 1: Buffer number as shown by the :ls command
  • 2: Ordinal number (buffers are numbered from 1 to n sequentially)
  • 3: Buffer number followed by ordinal number
  • 4: Ordinal number followed by buffer number

The separator between ordinal and regular buffer number can be configured using the option g:lightline#bufferline#ordinal_separator. The separator between the buffer numbers and the buffer name can be configured using the option g:lightline#bufferline#number_separator.

For option 2, 3 and 4 the number maps g:lightline#bufferline#ordinal_number_map and g:lightline#bufferline#composed_ordinal_number_map are used for ordinal numbers. For regular buffer numbers the number maps g:lightline#bufferline#buffer_number_map and g:lightline#bufferline#composed_buffer_number_map are used. The number maps are described below.

g:lightline#bufferline#composed_ordinal_number_map

Dictionary mapping ordinal numbers to their alternative character representations. Default is {}.

For example, to use parenthesized unicode numbers taken from Enclosed Alphanumerics Unicode block:

let g:lightline#bufferline#composed_ordinal_number_map = {
\ 1:  '', 2:  '', 3:  '', 4:  '', 5:  '',
\ 6:  '', 7:  '', 8:  '', 9:  '', 10: '',
\ 11: '', 12: '', 13: '', 14: '', 15: '',
\ 16: '', 17: '', 18: '', 19: '', 20: ''}

Note: The option only applies when g:lightline#bufferline#show_number is set to 2, 3 or 4.

g:lightline#bufferline#ordinal_number_map

Fallback dictionary mapping digits (0-9) which are used in ordinal number composing if the number is not mapped in g:lightline#bufferline#composed_ordinal_number_map. Default is {}.

For example, to use unicode superscript numerals:

let g:lightline#bufferline#ordinal_number_map = {
\ 0: '', 1: '¹', 2: '²', 3: '³', 4: '',
\ 5: '', 6: '', 7: '', 8: '', 9: ''}

... or unicode subscript numerals:

let g:lightline#bufferline#ordinal_number_map = {
\ 0: '', 1: '', 2: '', 3: '', 4: '',
\ 5: '', 6: '', 7: '', 8: '', 9: ''}

Note: The option only applies when g:lightline#bufferline#show_number is set to 2, 3 or 4.

g:lightline#bufferline#composed_buffer_number_map

Dictionary mapping regular buffer numbers to their alternative character representations. Default is {}.

See g:lightline#bufferline#composed_ordinal_number_map for example values.

Note: The option only applies when g:lightline#bufferline#show_number is set to 2, 3 or 4.

g:lightline#bufferline#buffer_number_map

Fallback dictionary mapping digits (0-9) which are used in regular buffer number composing if the number is not mapped in g:lightline#bufferline#composed_buffer_number_map. Default is {}.

See g:lightline#bufferline#ordinal_number_map for example values.

Note: The option only applies when g:lightline#bufferline#show_number is set to 2, 3 or 4.

g:lightline#bufferline#number_separator

Defines the string which is used to separate the buffer number (if enabled) and the buffer name. Default is ' '.

g:lightline#bufferline#ordinal_separator

Defines the string which is used to separate the buffer number and the ordinal number. Default is ''.

Icons

g:lightline#bufferline#enable_devicons

Enables the usage of vim-devicons or nvim-web-devicons to display a filetype icon for the buffer. Default is 0.

g:lightline#bufferline#enable_nerdfont

Enables the usage of nerdfont.vim to display a filetype icon for the buffer. Default is 0.

g:lightline#bufferline#icon_position

Defines the position of the filetype icon. Default is left. Valid values are:

  • left: Left of the buffer name and after the buffer number
  • right: Right of the buffer name
  • first: Left of the buffer name and number

Hiding

g:lightline#bufferline#auto_hide

Automatically hides the bufferline n milliseconds after switching the buffer. For example to show the bufferline for 4 seconds when switching the buffer and hide it afterwards use the following setting:

let g:lightline#bufferline#auto_hide = 4000

Default is 0 and disables the auto-hide behaviour.

g:lightline#bufferline#min_buffer_count

Hides the bufferline by default and shows it if there are n or more buffers. Default is 0 and the bufferline is always shown. If min_tab_count is also specified the bufferline will be shown if one of the conditions is met.

g:lightline#bufferline#min_tab_count

Hides the bufferline by default and shows it if there are n or more tabs. Default is 0 and the bufferline is always shown. If min_buffer_count is also specified the bufferline will be shown if one of the conditions is met. This option can be useful if you are also displaying tabs in the lightline tabline.

Filtering

g:lightline#bufferline#filter_by_tabpage

When more than one tab is opened, only buffers that are open in a window within the current tab are shown. When there is only one tab, all buffers are shown. Default is 0. This option can be useful if you are also displaying tabs in the lightline tabline.

g:lightline#bufferline#buffer_filter

This can be set to the name of a custom buffer filter function which will be used in addition to the standard buffer filtering. The function receives the buffer number as parameter and should return 1 to include the buffer and 0 to hide the buffer in the bufferline. For example to hide all neovim terminal buffers use this code in your vim config:

function LightlineBufferlineFilter(buffer)
  return getbufvar(a:buffer, '&buftype') !=# 'terminal'
endfunction

let g:lightline#bufferline#buffer_filter = "LightlineBufferlineFilter"

Instead of just 1 or 0, you can also return a string with a custom category name. The bufferline will only display the buffers with the same category as the active one. If the active buffer is hidden (empty string '' or 0) it will instead display category 'default' (equivalent to 1). This may be useful if you want to display different categories of buffers in different splits, and be able to jump between buffers without mixing categories. For example, if you want to keep all your terminals in a separate split, you can modify the function above:

function LightlineBufferlineFilter(buffer)
  return getbufvar(a:buffer, '&buftype') ==# 'terminal' ? 'terminal' : 1
endfunction

Mappings

This plugin provides Plug mappings to switch to buffers using their ordinal number in the bufferline. To display the ordinal numbers in the bufferline use the setting g:lightline#bufferline#show_number = 2.

To use the Plug mappings to navigate to buffers you can use e.g. these mappings:

nmap <Leader>1 <Plug>lightline#bufferline#go(1)
nmap <Leader>2 <Plug>lightline#bufferline#go(2)
nmap <Leader>3 <Plug>lightline#bufferline#go(3)
nmap <Leader>4 <Plug>lightline#bufferline#go(4)
nmap <Leader>5 <Plug>lightline#bufferline#go(5)
nmap <Leader>6 <Plug>lightline#bufferline#go(6)
nmap <Leader>7 <Plug>lightline#bufferline#go(7)
nmap <Leader>8 <Plug>lightline#bufferline#go(8)
nmap <Leader>9 <Plug>lightline#bufferline#go(9)
nmap <Leader>0 <Plug>lightline#bufferline#go(10)

nmap <Tab>   <Plug>lightline#bufferline#go_next()
nmap <S-Tab> <Plug>lightline#bufferline#go_previous()
nmap <Leader><Tab>   <Plug>lightline#bufferline#go_next_category()
nmap <Leader><S-Tab> <Plug>lightline#bufferline#go_previous_category()

For reordering buffers, you can use e.g. these mappings:

nmap <Leader>bl <Plug>lightline#bufferline#move_next()
nmap <Leader>bh <Plug>lightline#bufferline#move_previous()
nmap <Leader>bk <Plug>lightline#bufferline#move_first()
nmap <Leader>bj <Plug>lightline#bufferline#move_last()
nmap <Leader>bb <Plug>lightline#bufferline#reset_order()

Additionally you can use the following e.g. to delete buffers by their ordinal number.

nmap <Leader>c1 <Plug>lightline#bufferline#delete(1)
nmap <Leader>c2 <Plug>lightline#bufferline#delete(2)
nmap <Leader>c3 <Plug>lightline#bufferline#delete(3)
nmap <Leader>c4 <Plug>lightline#bufferline#delete(4)
nmap <Leader>c5 <Plug>lightline#bufferline#delete(5)
nmap <Leader>c6 <Plug>lightline#bufferline#delete(6)
nmap <Leader>c7 <Plug>lightline#bufferline#delete(7)
nmap <Leader>c8 <Plug>lightline#bufferline#delete(8)
nmap <Leader>c9 <Plug>lightline#bufferline#delete(9)
nmap <Leader>c0 <Plug>lightline#bufferline#delete(10)

Functions

This plugin provides some public functions to interact with the plugin.

lightline#bufferline#reload()

This function reloads the plugin configuration (e.g. when you have modified the configuration after vim is already running) and refreshes lightline.

lightline#bufferline#get_ordinal_number_for_buffer(buffer)

This function returns the ordinal number for the given buffer or -1 if the buffer is not found.

lightline#bufferline#get_buffer_for_ordinal_number(n)

This function returns the buffer for the ordinal number specified by parameter n or -1 if no buffer is found.

lightline#bufferline#go(n)

This function switches to the buffer with the ordinal number specified by parameter n. To switch to the first buffer using a mapping you can use the function like this:

nmap <Leader>1 :call lightline#bufferline#go(1)<CR>

lightline#bufferline#go_relative(offset)

This function switches to the buffer offset positions relative to the current buffer. Passing a value of 1 for offset would switch to the next buffer, while a value of -1 would switch to the previous buffer.

lightline#bufferline#go_next()

This function switches to the next buffer in the bufferline.

lightline#bufferline#go_previous()

This function switches to the previous buffer in the bufferline.

lightline#bufferline#go_next_category()

This function switches to the first buffer in the next category.

lightline#bufferline#go_previous_category()

This function switches to the first buffer in the previous category.

lightline#bufferline#move(target)

This function moves current buffer to given ordinal position.

lightline#bufferline#move_relative(offset)

This function moves current buffer by given number of positions. Passing a value of 1 for offset would move current buffer one position to right, while a value of -1 would move it one position to left.

lightline#bufferline#move_next()

This function moves current buffer one position to the right.

lightline#bufferline#move_previous()

This function moves current buffer one position to the left.

lightline#bufferline#move_first()

This function moves current buffer one position to the first position.

lightline#bufferline#move_last()

This function moves current buffer one position to the last position.

lightline#bufferline#reset_order()

This function resets the order of all buffers to default, which is the order buffers were created.

lightline#bufferline#delete(n)

This function deletes the buffer with the ordinal number specified by parameter n. To delete the first buffer using a mapping you can use the function like this:

nmap <D-1> :call lightline#bufferline#delete(1)<CR>

Example

The following minimal example adds the bufferline to the lightline tabline and demonstrates a few custom bufferline options:

let g:lightline#bufferline#show_number  = 1
let g:lightline#bufferline#shorten_path = 0
let g:lightline#bufferline#unnamed      = '[No Name]'

let g:lightline                  = {}
let g:lightline.tabline          = {'left': [['buffers']], 'right': [['close']]}
let g:lightline.component_expand = {'buffers': 'lightline#bufferline#buffers'}
let g:lightline.component_type   = {'buffers': 'tabsel'}

FAQ

Q: I can't see the tabline!
A: Add set showtabline=2 to your configuration. This forces the tabline to always show.

Q: My vim GUI (MacVim, gVim, etc.) displays a graphical tabline and not the lightline tabline!
A: Add set guioptions-=e to your configuration (and guard it with if has('gui_running') ... endif). This will disable the GUI tabline and enable the lightline tabline.

Q: How can I hide the path and show only the filename?
A: Add let g:lightline#bufferline#filename_modifier = ':t' to your configuration.

Q: My buffer filter behaves oddly when trying to use filetype!
A: getbufvar(a:buffer, '&filetype') return an empty string before buffer is loaded, e.g. when opening multiple files. You can use file extension fnamemodify(bufname(a:buffer), ':e') as a fallback.

Q: How to dynamically change how a single buffer is filtered?
A: You can declare a buffer local variable (e.g. let b:buffer_filter_override = 0) and check if it exists at the entry of your filter function.

License

Released under the MIT License

About

A lightweight plugin to display the list of buffers in the lightline vim plugin

Resources

License

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • Vim Script 98.7%
  • Lua 1.3%