Skip to content

Repository to store all necessary packages for common manipulator integrations

Notifications You must be signed in to change notification settings

dingo-cpr/dingo_manipulation

Repository files navigation

Dingo Manipulation

The purpose of this package is to make integration of manipulators much simpler. Currently this package only includes Gen3 Lite integrations, but supported manipulators will be expanded over time.

This doc will cover the setup for a single Gen3 Lite Dingo. Both Dingo-D and Dingo-O platforms are supported, though the process is identical for other arms, just with different package names as-necessary.

Additional Information

Please see http://www.clearpathrobotics.com/assets/guides/melodic/dingo/manipulation.html for additional information on physically configuring Dingo for mobile manipulation.

Cloning

To clone this repository and all necessary dependencies:

git clone https://github.com/dingo-cpr/dingo_manipulation.git --recursive

URDF

In your URDF, make sure to include the dingo_manipulation description that you want. For example, if you are using a single Gen3 Lite, make sure to include the line below in your URDF:

<xacro:include filename="$(find dingo_kinova_description)/urdf/dingo_gen3_lite_description.urdf.xacro" />

You will then want to export your URDF as the URDF_EXTRA for your robot. This will "attach" it to the Dingo. It's convenient to add all of these into a single shell script file that can be sourced later. Make sure to source the initial script as that will make sure to set any other necessary environment variables.

source $(catkin_find dingo_kinova_description)/scripts/dingo_gen3_lite_envar
export DINGO_URDF_EXTRAS=$(catkin_find your_description_package urdf/your_description.urdf.xacro --first-only)

Arm Positioning

Following above should make your Dingo with an arm attached to it. They will be attached in the default locations. If you need to change where the arm is mounted, export the necessary variables below.

DINGO_ARM_XYZ
DINGO_ARM_RPY

Example:

export DINGO_ARM_XYZ="-0.3 0.0 0.2"

Update Moveit Config

MoveIt is used to actually plan and move the arm. There are other ways to do this, but this is likely the easiest and most common.

Setup Package

The dingo_manipulation package has moveit configs setup already. That config should work out-of-the-box for your robot, but you may get weird collisions or warnings about missing joints. If your robot is custom, you can use that moveit config as a starting point for yours.

Go into the src folder in your workspace and run the command below:

rosrun dingo_gen3_lite_moveit_config customize_moveit.sh <new_package_name>

That command will make a new moveit package in your src folder that should be ready for customization to your actual platform.

Customize Package

To customize the moveit config, run the command below:

roslaunch <new_package_name> setup_assistant.launch

That command will bring up this window

doc_1

Click Load Files. This will load the urdf into the configurator. Keep an eye on the terminal. You may see a couple of warnings if your config is very different from the default, but if you see a lot of warnings, something is likely not sourced properly. Cancel this and make sure everything is sourced properly and run this again. Check in the 3D view window on the right and make sure that is what your robot looks like. I have seen issues lately where the 3D window is empty. Not sure how to fix this.

doc_2

Unless you want things to be very custom, there will likely be only 3 tabs you may need to change:

  • Self-Collisions
  • Robot Poses
  • Passive Joints

Self-Collisions

doc_3

Under this, drag the slider all the way to the right and click "Regenerate Default Collision Matrix". This may take a minute to run depending how complicated your model is. Once it is done, take a quick look through the collisions that have been automatically disabled. Take special notice of collisions that have been disabled because of "Collision by Default". This means that when the joints are at zeros, it is hitting something. Un-check any collisions that you do want to see if they happen.

Robot Poses

doc_4

These are saved, named positions that can be recalled later. If you want to add any pre-defined poses or modify the stow position that is already there, you can click "Add Pose" or "Edit Selected" and drag the sliders to set a new position.

doc_5

Passive Joints

doc_6

Passive joints are joints that MoveIt doesn't need to worry about. These are things like wheel joints or PTUs. Under this menu, select anything that isn't an arm joint and make sure it is in the right list.

Save It

When you select Configuration Files, you may get a warning about files changing. That isn't a problem, just click OK.

doc_7

The next step will show you the list of files that the wizard is responsible for. Make sure that nothing is selected except for:

  • config/
  • launch/
  • config/dingo.srdf

If you modified more than the sections outlined above, you may need to edit other files, but this may have other consequences.

doc_8

Once those files are selected, click Generate Package, then close down the wizard

Running Everything

There are 2 parts to working with this on the real robot:

Driver

Assuming the robot is all started up and the arm is setup, you should be able to run

roslaunch dingo_kinova_bringup dingo_gen3_lite_bringup.launch

If that worked properly, you should see the arm positioned properly in RVIZ or you should see the UR joints being published on the /joint_states topic

MoveIt!

MoveIt! is the planning and execution interface for the arm. It runs separately from the driver. Run the MoveIt! configuration you created above with

roslaunch dingo_gen3_lite_moveit_config dingo_gen3_lite_moveit_planning_execution.launch

You should see no errors coming up in the terminal. You should now be able to add the Moveit MotionPlanning plugin in RVIZ and command the arm around!

About

Repository to store all necessary packages for common manipulator integrations

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Contributors 4

  •  
  •  
  •  
  •