Skip to content

Helm chart to install Consul and other associated components.

License

Notifications You must be signed in to change notification settings

concertgenetics/consul-helm

 
 

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

Consul Helm Chart

This repository contains the official HashiCorp Helm chart for installing and configuring Consul on Kubernetes. This chart supports multiple use cases of Consul on Kubernetes depending on the values provided.

For full documentation on this Helm chart along with all the ways you can use Consul with Kubernetes, please see the Consul and Kubernetes documentation.

Prerequisites

To use the charts here, Helm must be installed in your Kubernetes cluster. Setting up Kubernetes and Helm and is outside the scope of this README. Please refer to the Kubernetes and Helm documentation.

The versions required are:

  • Helm 2.10+ - This is the earliest version of Helm tested. It is possible it works with earlier versions but this chart is untested for those versions.
  • Kubernetes 1.9+ - This is the earliest version of Kubernetes tested. It is possible that this chart works with earlier versions but it is untested. Other versions verified are Kubernetes 1.10, 1.11.

Usage

For now, we do not host a chart repository. To use the charts, you must download this repository and unpack it into a directory. Either download a tagged release or use git checkout to a tagged release. Assuming this repository was unpacked into the directory consul-helm, the chart can then be installed directly:

helm install ./consul-helm

Please see the many options supported in the values.yaml file. These are also fully documented directly on the Consul website.

Rebasing contributions against master

PRs in this repo are merged using the rebase method. This keeps the git history clean by adding the PR commits to the most recent end of the commit history. It also has the benefit of keeping all the relevant commits for a given PR together, rather than spread throughout the git history based on when the commits were first created.

If the changes in your PR do not conflict with any of the existing code in the project, then Github supports automatic rebasing when the PR is accepted into the code. However, if there are conflicts (there will be a warning on the PR that reads "This branch cannot be rebased due to conflicts"), you will need to manually rebase the branch on master, fixing any conflicts along the way before the code can be merged.

Testing

The Helm chart ships with both unit and acceptance tests.

The unit tests don't require any active Kubernetes cluster and complete very quickly. These should be used for fast feedback during development. The acceptance tests require a Kubernetes cluster with a configured kubectl. Both require Bats and helm to be installed and available on the CLI. The unit tests also require the correct version of yq if running locally.

To run the unit tests:

bats ./test/unit

To run the acceptance tests:

bats ./test/acceptance

If the acceptance tests fail, deployed resources in the Kubernetes cluster may not be properly cleaned up. We recommend recycling the Kubernetes cluster to start from a clean slate.

Note: There is a Terraform configuration in the test/terraform/ directory that can be used to quickly bring up a GKE cluster and configure kubectl and helm locally. This can be used to quickly spin up a test cluster for acceptance tests. Unit tests do not require a running Kubernetes cluster.

Writing Unit Tests

Changes to the Helm chart should be accompanied by appropriate unit tests.

Formatting

  • Put tests in the test file in the same order as the variables appear in the values.yaml.

  • Start tests for a chart value with a header that says what is being tested, like this:

    #--------------------------------------------------------------------
    # annotations
    
  • Name the test based on what it's testing in the following format (this will be its first line):

    @test "<section being tested>: <short description of the test case>" {
    

    When adding tests to an existing file, the first section will be the same as the other tests in the file.

Test Details

Bats provides a way to run commands in a shell and inspect the output in an automated way. In all of the tests in this repo, the base command being run is helm template which turns the templated files into straight yaml output. In this way, we're able to test that the various conditionals in the templates render as we would expect.

Each test defines the files that should be rendered using the -x flag, then it might adjust chart values by adding --set flags as well. The output from this helm template command is then piped to yq. yq allows us to pull out just the information we're interested in, either by referencing its position in the yaml file directly or giving information about it (like its length). The -r flag can be used with yq to return a raw string instead of a quoted one which is especially useful when looking for an exact match.

The test passes or fails based on the conditional at the end that is in square brackets, which is a comparison of our expected value and the output of helm template piped to yq.

The | tee /dev/stderr pieces direct any terminal output of the helm template and yq commands to stderr so that it doesn't interfere with bats.

Test Examples

Here are some examples of common test patterns:

  • Check that a value is disabled by default

    @test "ui/Service: no type by default" {
      cd `chart_dir`
      local actual=$(helm template \
          -x templates/ui-service.yaml  \
          . | tee /dev/stderr |
          yq -r '.spec.type' | tee /dev/stderr)
      [ "${actual}" = "null" ]
    }
    

    In this example, nothing is changed from the default templates (no --set flags), then we use yq to retrieve the value we're checking, .spec.type. This output is then compared against our expected value (null in this case) in the assertion [ "${actual}" = "null" ].

  • Check that a template value is rendered to a specific value

    @test "ui/Service: specified type" {
      cd `chart_dir`
      local actual=$(helm template \
          -x templates/ui-service.yaml  \
          --set 'ui.service.type=LoadBalancer' \
          . | tee /dev/stderr |
          yq -r '.spec.type' | tee /dev/stderr)
      [ "${actual}" = "LoadBalancer" ]
    }
    

    This is very similar to the last example, except we've changed a default value with the --set flag and correspondingly changed the expected value.

  • Check that a template value contains several values

    @test "syncCatalog/Deployment: to-k8s only" {
      cd `chart_dir`
      local actual=$(helm template \
          -x templates/sync-catalog-deployment.yaml  \
          --set 'syncCatalog.enabled=true' \
          --set 'syncCatalog.toConsul=false' \
          . | tee /dev/stderr |
          yq '.spec.template.spec.containers[0].command | any(contains("-to-consul=false"))' | tee /dev/stderr)
      [ "${actual}" = "true" ]
    
      local actual=$(helm template \
          -x templates/sync-catalog-deployment.yaml  \
          --set 'syncCatalog.enabled=true' \
          --set 'syncCatalog.toConsul=false' \
          . | tee /dev/stderr |
          yq '.spec.template.spec.containers[0].command | any(contains("-to-k8s"))' | tee /dev/stderr)
      [ "${actual}" = "false" ]
    }
    

    In this case, the same command is run twice in the same test. This can be used to look for several things in the same field, or to check that something is not present that shouldn't be.

    Note: If testing more than two conditions, it would be good to separate the helm template part of the command from the yq sections to reduce redundant work.

  • Check that an entire template file is not rendered

    @test "syncCatalog/Deployment: disabled by default" {
      cd `chart_dir`
      local actual=$(helm template \
          -x templates/sync-catalog-deployment.yaml  \
          . | tee /dev/stderr |
          yq 'length > 0' | tee /dev/stderr)
      [ "${actual}" = "false" ]
    }
    

    Here we are check the length of the command output to see if the anything is rendered. This style can easily be switched to check that a file is rendered instead.

About

Helm chart to install Consul and other associated components.

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Shell 95.4%
  • HCL 2.0%
  • Smarty 1.4%
  • Dockerfile 1.1%
  • Makefile 0.1%