mixpre-dc-buddy

DIY MixPre DC power input with SD card access

Just the raw design files for now, more detailed explanation to come.

Enclosures

MixPre-6 (tested with original and II)

CAD design (for modification): OnShape CAD design

STL files: enclosure-6

MixPre-10 II (only tested with II)

CAD design (for modification): OnShape CAD design

STL files: enclosure-10

parts list

• 3d printed case from CAD above
• PCB from fab files in this repo (I used Osh Park to get them made)
• CC BEC 2.0 VOLTAGE REGULATOR
• A short DC cable with the right connector for your battery
• nuts and bolts
  • MixPre-6
    • 3x M2.5x16mm hex socket head cap screws
    • 1x M2.5x25mm hex socket head cap screws
    • 5x M2.5 nuts
  • MixPre-10 II
    • 3x M2.5x25mm hex socket head cap screws
    • 3x M2.5 nuts
  • I got an assortment kit