Added CTAG face2|4 Audio Card support for BeagleBoard-X15 #97
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
RobertCNelson
force-pushed
the
4.1
branch
2 times, most recently
from
2c086b5
to
e929367
Compare
|
@henrix Do these work on 4.4 as well? |
|
Hi Jason, I have not tested the driver on 4.4 kernel yet but I saw some driver Best Regards Henrik Am 09.08.2016 7:54 nachm. schrieb "Jason Kridner" <notifications@github.com
|
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
… is defined
'owner' member of 'struct mutex' is defined as below
in 'include/linux/mutex.h':
struct mutex {
...
if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_MUTEX_SPIN_ON_OWNER)
struct task_struct *owner;
endif
...
But function au_pin_hdir_set_owner() called owner as below:
void au_pin_hdir_set_owner(struct au_pin *p, struct task_struct *task)
{
if defined(CONFIG_DEBUG_MUTEXES) || defined(CONFIG_SMP)
p->hdir->hi_inode->i_mutex.owner = task;
endif
}
So if Kernel doesn't define 'DEBUG_MUTEXES' and 'MUTEX_SPIN_ON_OWNER',
but defines SMP, compiler will report the below error:
fs/aufs/i_op.c: In function 'au_pin_hdir_set_owner':
fs/aufs/i_op.c:593:28: error: 'struct mutex' has no member named 'owner'
p->hdir->hi_inode->i_mutex.owner = task;
^
Signed-off-by: Yanjiang Jin <yanjiang.jin@windriver.com>
Signed-off-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
This reverts commit 956b200.
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
This adds support for the Vitesse VSC8601 PHY. Generic functions are used for everything except interrupt handling. Signed-off-by: Mans Rullgard <mans@mansr.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
It's a common operation for device drivers to retrive the data
member from of_device_id struct in their probe function.
Most driver end up doing:
const struct of_device_id *match;
match = of_match_device(driver_of_match, &pdev->dev);
driver->data = match->data;
With the of_device_get_match_data helper function all this can
done in one go.
Signed-off-by: Joachim Eastwood <manabian@gmail.com>
[robh: add missing inline to dummmy declaration]
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
<zmatt> rcn-ee: btw, I got a small patch that makes 4.1-ti compile in thumb mode again, you want it? (this means TI still compiles in ARM mode? why oh why?) <zmatt> http://pastebin.com/3S3sy8U4 Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
… there is also a hidden SSID in the scan list Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
https://github.com/rcn-ee/meta-processor-sdk/blob/master/recipes-kernel/linux/files/dra7xx/cmem.dtsi Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
PRU IRAM addresses need to be masked before being handled to remoteproc. This is due to PRU Binutils' lack of separate address spaces for IRAM and DRAM. Signed-off-by: Dimitar Dimitrov <dinuxbg@gmail.com>
…operty) Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
4.1 TI Delta: RobertCNelson/ti-linux-kernel@5b7dbf2...c6b46b7 Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
|
CTAG face2|4 Audio Card drivers for BeagleBone Black/Green and BeagleBoard-X15 has been added to 4.1 and 4.4 kernel. Forks have been synced with upstream BeagleBoard repo. |
|
@RobertCNelson Can you merge the new drivers for BB-X15 in 4.1 kernel as well? |
RobertCNelson
pushed a commit
that referenced
this pull request
Jan 12, 2017
commit 1c7de2b upstream. There is at least one Chelsio 10Gb card which uses VPD area to store some non-standard blocks (example below). However pci_vpd_size() returns the length of the first block only assuming that there can be only one VPD "End Tag". Since 4e1a635 ("vfio/pci: Use kernel VPD access functions"), VFIO blocks access beyond that offset, which prevents the guest "cxgb3" driver from probing the device. The host system does not have this problem as its driver accesses the config space directly without pci_read_vpd(). Add a quirk to override the VPD size to a bigger value. The maximum size is taken from EEPROMSIZE in drivers/net/ethernet/chelsio/cxgb3/common.h. We do not read the tag as the cxgb3 driver does as the driver supports writing to EEPROM/VPD and when it writes, it only checks for 8192 bytes boundary. The quirk is registered for all devices supported by the cxgb3 driver. This adds a quirk to the PCI layer (not to the cxgb3 driver) as the cxgb3 driver itself accesses VPD directly and the problem only exists with the vfio-pci driver (when cxgb3 is not running on the host and may not be even loaded) which blocks accesses beyond the first block of VPD data. However vfio-pci itself does not have quirks mechanism so we add it to PCI. This is the controller: Ethernet controller [0200]: Chelsio Communications Inc T310 10GbE Single Port Adapter [1425:0030] This is what I parsed from its VPD: === b'\x82*\x0010 Gigabit Ethernet-SR PCI Express Adapter\x90J\x00EC\x07D76809 FN\x0746K' 0000 Large item 42 bytes; name 0x2 Identifier String b'10 Gigabit Ethernet-SR PCI Express Adapter' 002d Large item 74 bytes; name 0x10 #00 [EC] len=7: b'D76809 ' #0a [FN] len=7: b'46K7897' #14 [PN] len=7: b'46K7897' #1e [MN] len=4: b'1037' #25 [FC] len=4: b'5769' #2c [SN] len=12: b'YL102035603V' #3b [NA] len=12: b'00145E992ED1' 007a Small item 1 bytes; name 0xf End Tag 0c00 Large item 16 bytes; name 0x2 Identifier String b'S310E-SR-X ' 0c13 Large item 234 bytes; name 0x10 #00 [PN] len=16: b'TBD ' #13 [EC] len=16: b'110107730D2 ' #26 [SN] len=16: b'97YL102035603V ' #39 [NA] len=12: b'00145E992ED1' #48 [V0] len=6: b'175000' #51 [V1] len=6: b'266666' #5a [V2] len=6: b'266666' #63 [V3] len=6: b'2000 ' #6c [V4] len=2: b'1 ' #71 [V5] len=6: b'c2 ' #7a [V6] len=6: b'0 ' #83 [V7] len=2: b'1 ' #88 [V8] len=2: b'0 ' #8d [V9] len=2: b'0 ' #92 [VA] len=2: b'0 ' #97 [RV] len=80: b's\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0d00 Large item 252 bytes; name 0x11 #00 [VC] len=16: b'122310_1222 dp ' #13 [VD] len=16: b'610-0001-00 H1\x00\x00' #26 [VE] len=16: b'122310_1353 fp ' #39 [VF] len=16: b'610-0001-00 H1\x00\x00' #4c [RW] len=173: b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'... 0dff Small item 0 bytes; name 0xf End Tag 10f3 Large item 13315 bytes; name 0x62 !!! unknown item name 98: b'\xd0\x03\x00@`\x0c\x08\x00\x00\x00\x00\x00\x00\x00\x00\x00' === Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Dec 11, 2017
commit 6baea43 upstream. KPROBES_SANITY_TEST throws the below splat when CONFIG_PREEMPT is enabled: Kprobe smoke test: started DEBUG_LOCKS_WARN_ON(val > preempt_count()) ------------[ cut here ]------------ WARNING: CPU: 19 PID: 1 at kernel/sched/core.c:3094 preempt_count_sub+0xcc/0x140 Modules linked in: CPU: 19 PID: 1 Comm: swapper/0 Not tainted 4.13.0-rc7-nnr+ #97 task: c0000000fea80000 task.stack: c0000000feb00000 NIP: c00000000011d3dc LR: c00000000011d3d8 CTR: c000000000a090d0 REGS: c0000000feb03400 TRAP: 0700 Not tainted (4.13.0-rc7-nnr+) MSR: 8000000000021033 <SF,ME,IR,DR,RI,LE> CR: 28000282 XER: 00000000 CFAR: c00000000015aa18 SOFTE: 0 <snip> NIP preempt_count_sub+0xcc/0x140 LR preempt_count_sub+0xc8/0x140 Call Trace: preempt_count_sub+0xc8/0x140 (unreliable) kprobe_handler+0x228/0x4b0 program_check_exception+0x58/0x3b0 program_check_common+0x16c/0x170 --- interrupt: 0 at kprobe_target+0x8/0x20 LR = init_test_probes+0x248/0x7d0 kp+0x0/0x80 (unreliable) livepatch_handler+0x38/0x74 init_kprobes+0x1d8/0x208 do_one_initcall+0x68/0x1d0 kernel_init_freeable+0x298/0x374 kernel_init+0x24/0x160 ret_from_kernel_thread+0x5c/0x70 Instruction dump: 419effdc 3d22001b 39299240 81290000 2f890000 409effc8 3c82ffcb 3c62ffcb 3884bc68 3863bc18 4803d5fd 60000000 <0fe00000> 4bffffa8 60000000 60000000 ---[ end trace 432dd46b4ce3d29f ]--- Kprobe smoke test: passed successfully The issue is that we aren't disabling preemption in kprobe_ftrace_handler(). Disable it. Fixes: ead514d ("powerpc/kprobes: Add support for KPROBES_ON_FTRACE") Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> [mpe: Trim oops a little for formatting] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Jan 31, 2018
[ Upstream commit 02612bb ] In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom was probably fine before the introduction of ->needed_headroom in commit f5184d2 ("net: Allow netdevices to specify needed head/tailroom"). But now, virtual devices typically advertise the size of their overhead in dev->needed_headroom, so we must also take it into account in skb_reserve(). Allocation size of skb is also updated to take dev->needed_tailroom into account and replace the arbitrary 32 bytes with the real size of a PPPoE header. This issue was discovered by syzbot, who connected a pppoe socket to a gre device which had dev->header_ops->create == ipgre_header and dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any headroom, and dev_hard_header() crashed when ipgre_header() tried to prepend its header to skb->data. skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24 head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted 4.15.0-rc7-next-20180115+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282 RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000 RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0 R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180 FS: 00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_under_panic net/core/skbuff.c:114 [inline] skb_push+0xce/0xf0 net/core/skbuff.c:1714 ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879 dev_hard_header include/linux/netdevice.h:2723 [inline] pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 sock_write_iter+0x31a/0x5d0 net/socket.c:909 call_write_iter include/linux/fs.h:1775 [inline] do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653 do_iter_write+0x154/0x540 fs/read_write.c:932 vfs_writev+0x18a/0x340 fs/read_write.c:977 do_writev+0xfc/0x2a0 fs/read_write.c:1012 SYSC_writev fs/read_write.c:1085 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1082 entry_SYSCALL_64_fastpath+0x29/0xa0 Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like interfaces, but reserving space for ->needed_headroom is a more fundamental issue that needs to be addressed first. Same problem exists for __pppoe_xmit(), which also needs to take dev->needed_headroom into account in skb_cow_head(). Fixes: f5184d2 ("net: Allow netdevices to specify needed head/tailroom") Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
fhgwright
pushed a commit
to fhgwright/bb-linux
that referenced
this pull request
Feb 8, 2018
[ Upstream commit 02612bb ] In pppoe_sendmsg(), reserving dev->hard_header_len bytes of headroom was probably fine before the introduction of ->needed_headroom in commit f5184d2 ("net: Allow netdevices to specify needed head/tailroom"). But now, virtual devices typically advertise the size of their overhead in dev->needed_headroom, so we must also take it into account in skb_reserve(). Allocation size of skb is also updated to take dev->needed_tailroom into account and replace the arbitrary 32 bytes with the real size of a PPPoE header. This issue was discovered by syzbot, who connected a pppoe socket to a gre device which had dev->header_ops->create == ipgre_header and dev->hard_header_len == 0. Therefore, PPPoE didn't reserve any headroom, and dev_hard_header() crashed when ipgre_header() tried to prepend its header to skb->data. skbuff: skb_under_panic: text:000000001d390b3a len:31 put:24 head:00000000d8ed776f data:000000008150e823 tail:0x7 end:0xc0 dev:gre0 ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:104! invalid opcode: 0000 [beagleboard#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 3670 Comm: syzkaller801466 Not tainted 4.15.0-rc7-next-20180115+ beagleboard#97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:skb_panic+0x162/0x1f0 net/core/skbuff.c:100 RSP: 0018:ffff8801d9bd7840 EFLAGS: 00010282 RAX: 0000000000000083 RBX: ffff8801d4f083c0 RCX: 0000000000000000 RDX: 0000000000000083 RSI: 1ffff1003b37ae92 RDI: ffffed003b37aefc RBP: ffff8801d9bd78a8 R08: 1ffff1003b37ae8a R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000000 R12: ffffffff86200de0 R13: ffffffff84a981ad R14: 0000000000000018 R15: ffff8801d2d34180 FS: 00000000019c4880(0000) GS:ffff8801db300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000208bc000 CR3: 00000001d9111001 CR4: 00000000001606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: skb_under_panic net/core/skbuff.c:114 [inline] skb_push+0xce/0xf0 net/core/skbuff.c:1714 ipgre_header+0x6d/0x4e0 net/ipv4/ip_gre.c:879 dev_hard_header include/linux/netdevice.h:2723 [inline] pppoe_sendmsg+0x58e/0x8b0 drivers/net/ppp/pppoe.c:890 sock_sendmsg_nosec net/socket.c:630 [inline] sock_sendmsg+0xca/0x110 net/socket.c:640 sock_write_iter+0x31a/0x5d0 net/socket.c:909 call_write_iter include/linux/fs.h:1775 [inline] do_iter_readv_writev+0x525/0x7f0 fs/read_write.c:653 do_iter_write+0x154/0x540 fs/read_write.c:932 vfs_writev+0x18a/0x340 fs/read_write.c:977 do_writev+0xfc/0x2a0 fs/read_write.c:1012 SYSC_writev fs/read_write.c:1085 [inline] SyS_writev+0x27/0x30 fs/read_write.c:1082 entry_SYSCALL_64_fastpath+0x29/0xa0 Admittedly PPPoE shouldn't be allowed to run on non Ethernet-like interfaces, but reserving space for ->needed_headroom is a more fundamental issue that needs to be addressed first. Same problem exists for __pppoe_xmit(), which also needs to take dev->needed_headroom into account in skb_cow_head(). Fixes: f5184d2 ("net: Allow netdevices to specify needed head/tailroom") Reported-by: syzbot+ed0838d0fa4c4f2b528e20286e6dc63effc7c14d@syzkaller.appspotmail.com Signed-off-by: Guillaume Nault <g.nault@alphalink.fr> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Jun 4, 2018
[ Upstream commit 8610783 ] If fbdev emulation is disabled, the QXL shutdown path will try to clean a framebuffer that wasn't initialized, hitting the Oops below. The problem is that even when FBDEV_EMULATION is disabled we allocate the qfbdev strutucture, but we don't initialize it. The fix is to stop allocating the memory, since it won't be used. This allows the existing verification in the cleanup hook to do it's job preventing the oops. Now that we don't allocate the unused fbdev structure, we need to be careful when dereferencing it in the PM suspend hook. [ 24.284684] BUG: unable to handle kernel NULL pointer dereference at 00000000000002e0 [ 24.285627] IP: mutex_lock+0x18/0x30 [ 24.286049] PGD 78cdf067 [ 24.286050] PUD 7940f067 [ 24.286344] PMD 0 [ 24.286649] [ 24.287072] Oops: 0002 [#1] SMP [ 24.287422] Modules linked in: qxl [ 24.287806] CPU: 0 PID: 2328 Comm: bash Not tainted 4.10.0-rc5+ #97 [ 24.288515] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014 [ 24.289681] task: ffff88007c4c0000 task.stack: ffffc90001b58000 [ 24.290354] RIP: 0010:mutex_lock+0x18/0x30 [ 24.290812] RSP: 0018:ffffc90001b5bcb0 EFLAGS: 00010246 [ 24.291401] RAX: 0000000000000000 RBX: 00000000000002e0 RCX: 0000000000000000 [ 24.292209] RDX: ffff88007c4c0000 RSI: 0000000000000001 RDI: 00000000000002e0 [ 24.292987] RBP: ffffc90001b5bcb8 R08: fffffffffffffffe R09: 0000000000000001 [ 24.293797] R10: ffff880078d80b80 R11: 0000000000011400 R12: 0000000000000000 [ 24.294601] R13: 00000000000002e0 R14: ffffffffa0009c28 R15: 0000000000000060 [ 24.295439] FS: 00007f30e3acbb40(0000) GS:ffff88007fc00000(0000) knlGS:0000000000000000 [ 24.296364] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 24.296997] CR2: 00000000000002e0 CR3: 0000000078c7b000 CR4: 00000000000006f0 [ 24.297813] Call Trace: [ 24.298097] drm_framebuffer_cleanup+0x1f/0x70 [ 24.298612] qxl_fbdev_fini+0x68/0x90 [qxl] [ 24.299074] qxl_modeset_fini+0xd/0x30 [qxl] [ 24.299562] qxl_pci_remove+0x22/0x50 [qxl] [ 24.300025] pci_device_remove+0x34/0xb0 [ 24.300507] device_release_driver_internal+0x150/0x200 [ 24.301082] device_release_driver+0xd/0x10 [ 24.301587] unbind_store+0x108/0x150 [ 24.301993] drv_attr_store+0x20/0x30 [ 24.302402] sysfs_kf_write+0x32/0x40 [ 24.302827] kernfs_fop_write+0x108/0x190 [ 24.303269] __vfs_write+0x23/0x120 [ 24.303678] ? security_file_permission+0x36/0xb0 [ 24.304193] ? rw_verify_area+0x49/0xb0 [ 24.304636] vfs_write+0xb0/0x190 [ 24.305004] SyS_write+0x41/0xa0 [ 24.305362] entry_SYSCALL_64_fastpath+0x1a/0xa9 [ 24.305887] RIP: 0033:0x7f30e31d9620 [ 24.306285] RSP: 002b:00007ffc54b47e68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 24.307128] RAX: ffffffffffffffda RBX: 00007f30e3497600 RCX: 00007f30e31d9620 [ 24.307928] RDX: 000000000000000d RSI: 0000000000da2008 RDI: 0000000000000001 [ 24.308727] RBP: 000000000070bc60 R08: 00007f30e3498760 R09: 00007f30e3acbb40 [ 24.309504] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000001 [ 24.310295] R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffc54b47f34 [ 24.311095] Code: 0e 01 e9 7b fe ff ff 66 90 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 48 89 fb e8 83 e8 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <3e> 48 0f b1 13 48 85 c0 74 08 48 89 df e8 66 fd ff ff 5b 5d c3 [ 24.313182] RIP: mutex_lock+0x18/0x30 RSP: ffffc90001b5bcb0 [ 24.313811] CR2: 00000000000002e0 [ 24.314208] ---[ end trace 29669c1593cae14b ]--- Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Link: http://patchwork.freedesktop.org/patch/msgid/20170227203330.18542-1-krisman@collabora.co.uk Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Sep 13, 2018
commit d8ffee2 upstream. Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort: Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c) Cc: <stable@vger.kernel.org> Fixes: 5ee67b5 ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Oct 22, 2018
commit d8ffee2 upstream. Registers of DSPI should not be accessed before enabling its clock. On Toradex Colibri VF50 on Iris carrier board this could be seen during bootup as imprecise abort: Unhandled fault: imprecise external abort (0x1c06) at 0x00000000 Internal error: : 1c06 [#1] ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.39-dirty #97 Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) Backtrace: [<804166a8>] (regmap_write) from [<80466b5c>] (dspi_probe+0x1f0/0x8dc) [<8046696c>] (dspi_probe) from [<8040107c>] (platform_drv_probe+0x54/0xb8) [<80401028>] (platform_drv_probe) from [<803ff53c>] (driver_probe_device+0x280/0x2f8) [<803ff2bc>] (driver_probe_device) from [<803ff674>] (__driver_attach+0xc0/0xc4) [<803ff5b4>] (__driver_attach) from [<803fd818>] (bus_for_each_dev+0x70/0xa4) [<803fd7a8>] (bus_for_each_dev) from [<803fee74>] (driver_attach+0x24/0x28) [<803fee50>] (driver_attach) from [<803fe980>] (bus_add_driver+0x1a0/0x218) [<803fe7e0>] (bus_add_driver) from [<803fffe8>] (driver_register+0x80/0x100) [<803fff68>] (driver_register) from [<80400fdc>] (__platform_driver_register+0x48/0x50) [<80400f94>] (__platform_driver_register) from [<8091cf7c>] (fsl_dspi_driver_init+0x1c/0x20) [<8091cf60>] (fsl_dspi_driver_init) from [<8010195c>] (do_one_initcall+0x4c/0x174) [<80101910>] (do_one_initcall) from [<80900e8c>] (kernel_init_freeable+0x144/0x1d8) [<80900d48>] (kernel_init_freeable) from [<805ff6a8>] (kernel_init+0x10/0x114) [<805ff698>] (kernel_init) from [<80107be8>] (ret_from_fork+0x14/0x2c) Cc: <stable@vger.kernel.org> Fixes: 5ee67b5 ("spi: dspi: clear SPI_SR before enable interrupt") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crow-misia
pushed a commit
to crow-misia/linux
that referenced
this pull request
Mar 20, 2019
[ Upstream commit 2a5ff07 ] We keep receiving syzbot reports [1] that show that tunnels do not play the rcu/IFF_UP rules properly. At device dismantle phase, gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. This means that IFF_UP needs to be tested before queueing packets into netif_rx() or gro_cells. This patch implements the test in gro_cells_receive() because too many callers do not seem to bother enough. [1] BUG: unable to handle kernel paging request at fffff4ca0b9ffffe PGD 0 P4D 0 Oops: 0000 [beagleboard#1] PREEMPT SMP KASAN CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ beagleboard#97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Call Trace: kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2' ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173 worker_thread+0x98/0xe40 kernel/workqueue.c:2319 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: CR2: fffff4ca0b9ffffe [ end trace 513fc9c1338d1cb3 ] RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Fixes: c9e6bc6 ("net: add gro_cells infrastructure") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crow-misia
pushed a commit
to crow-misia/linux
that referenced
this pull request
Mar 20, 2019
[ Upstream commit 1e02796 ] syzbot found another add_timer() issue, this time in net/hsr [1] Let's use mod_timer() which is safe. [1] kernel BUG at kernel/time/timer.c:1136! invalid opcode: 0000 [beagleboard#1] PREEMPT SMP KASAN CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ beagleboard#97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 kobject: 'loop2' (00000000f5629718): kobject_uevent_env RIP: 0010:add_timer kernel/time/timer.c:1136 [inline] RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134 Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9 RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246 kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2' RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000 RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8 RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30 FS: 00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: hsr_check_announce net/hsr/hsr_device.c:99 [inline] hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] dev_open net/core/dev.c:1436 [inline] dev_open+0x143/0x160 net/core/dev.c:1424 team_port_add drivers/net/team/team.c:1203 [inline] team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933 do_set_master net/core/rtnetlink.c:2358 [inline] do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:632 sock_write_iter+0x27c/0x3e0 net/socket.c:923 call_write_iter include/linux/fs.h:1869 [inline] do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680 do_iter_write fs/read_write.c:956 [inline] do_iter_write+0x184/0x610 fs/read_write.c:937 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001 do_writev+0xf6/0x290 fs/read_write.c:1036 __do_sys_writev fs/read_write.c:1109 [inline] __se_sys_writev fs/read_write.c:1106 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4 R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff Fixes: f421436 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crow-misia
pushed a commit
to crow-misia/linux
that referenced
this pull request
Mar 20, 2019
[ Upstream commit 95d6ebd ] In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ beagleboard#97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 27, 2019
[ Upstream commit 2a5ff07 ] We keep receiving syzbot reports [1] that show that tunnels do not play the rcu/IFF_UP rules properly. At device dismantle phase, gro_cells_destroy() will be called only after a full rcu grace period is observed after IFF_UP has been cleared. This means that IFF_UP needs to be tested before queueing packets into netif_rx() or gro_cells. This patch implements the test in gro_cells_receive() because too many callers do not seem to bother enough. [1] BUG: unable to handle kernel paging request at fffff4ca0b9ffffe PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 21 Comm: kworker/u4:1 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 kobject: 'loop2' (000000004bd7d84a): kobject_uevent_env FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Call Trace: kobject: 'loop2' (000000004bd7d84a): fill_kobj_path: path = '/devices/virtual/block/loop2' ip_tunnel_dev_free+0x19/0x60 net/ipv4/ip_tunnel.c:1010 netdev_run_todo+0x51c/0x7d0 net/core/dev.c:8970 rtnl_unlock+0xe/0x10 net/core/rtnetlink.c:116 ip_tunnel_delete_nets+0x423/0x5f0 net/ipv4/ip_tunnel.c:1124 vti_exit_batch_net+0x23/0x30 net/ipv4/ip_vti.c:495 ops_exit_list.isra.0+0x105/0x160 net/core/net_namespace.c:156 cleanup_net+0x3fb/0x960 net/core/net_namespace.c:551 process_one_work+0x98e/0x1790 kernel/workqueue.c:2173 worker_thread+0x98/0xe40 kernel/workqueue.c:2319 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 Modules linked in: CR2: fffff4ca0b9ffffe [ end trace 513fc9c1338d1cb3 ] RIP: 0010:__skb_unlink include/linux/skbuff.h:1929 [inline] RIP: 0010:__skb_dequeue include/linux/skbuff.h:1945 [inline] RIP: 0010:__skb_queue_purge include/linux/skbuff.h:2656 [inline] RIP: 0010:gro_cells_destroy net/core/gro_cells.c:89 [inline] RIP: 0010:gro_cells_destroy+0x19d/0x360 net/core/gro_cells.c:78 Code: 03 42 80 3c 20 00 0f 85 53 01 00 00 48 8d 7a 08 49 8b 47 08 49 c7 07 00 00 00 00 48 89 f9 49 c7 47 08 00 00 00 00 48 c1 e9 03 <42> 80 3c 21 00 0f 85 10 01 00 00 48 89 c1 48 89 42 08 48 c1 e9 03 RSP: 0018:ffff8880aa3f79a8 EFLAGS: 00010a02 RAX: 00ffffffffffffe8 RBX: ffffe8ffffc64b70 RCX: 1ffff8ca0b9ffffe RDX: ffffc6505cffffe8 RSI: ffffffff858410ca RDI: ffffc6505cfffff0 RBP: ffff8880aa3f7a08 R08: ffff8880aa3e8580 R09: fffffbfff1263645 R10: fffffbfff1263644 R11: ffffffff8931b223 R12: dffffc0000000000 kobject: 'loop3' (00000000e4ee57a6): kobject_uevent_env R13: 0000000000000000 R14: ffffe8ffffc64b80 R15: ffffe8ffffc64b75 FS: 0000000000000000(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: fffff4ca0b9ffffe CR3: 0000000094941000 CR4: 00000000001406f0 Fixes: c9e6bc6 ("net: add gro_cells infrastructure") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 27, 2019
[ Upstream commit 1e02796 ] syzbot found another add_timer() issue, this time in net/hsr [1] Let's use mod_timer() which is safe. [1] kernel BUG at kernel/time/timer.c:1136! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 15909 Comm: syz-executor.3 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 kobject: 'loop2' (00000000f5629718): kobject_uevent_env RIP: 0010:add_timer kernel/time/timer.c:1136 [inline] RIP: 0010:add_timer+0x654/0xbe0 kernel/time/timer.c:1134 Code: 0f 94 c5 31 ff 44 89 ee e8 09 61 0f 00 45 84 ed 0f 84 77 fd ff ff e8 bb 5f 0f 00 e8 07 10 a0 ff e9 68 fd ff ff e8 ac 5f 0f 00 <0f> 0b e8 a5 5f 0f 00 0f 0b e8 9e 5f 0f 00 4c 89 b5 58 ff ff ff e9 RSP: 0018:ffff8880656eeca0 EFLAGS: 00010246 kobject: 'loop2' (00000000f5629718): fill_kobj_path: path = '/devices/virtual/block/loop2' RAX: 0000000000040000 RBX: 1ffff1100caddd9a RCX: ffffc9000c436000 RDX: 0000000000040000 RSI: ffffffff816056c4 RDI: ffff88806a2f6cc8 RBP: ffff8880656eed58 R08: ffff888067f4a300 R09: ffff888067f4abc8 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88806a2f6cc0 R13: dffffc0000000000 R14: 0000000000000001 R15: ffff8880656eed30 FS: 00007fc2019bf700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000738000 CR3: 0000000067e8e000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: hsr_check_announce net/hsr/hsr_device.c:99 [inline] hsr_check_carrier_and_operstate+0x567/0x6f0 net/hsr/hsr_device.c:120 hsr_netdev_notify+0x297/0xa00 net/hsr/hsr_main.c:51 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] dev_open net/core/dev.c:1436 [inline] dev_open+0x143/0x160 net/core/dev.c:1424 team_port_add drivers/net/team/team.c:1203 [inline] team_add_slave+0xa07/0x15d0 drivers/net/team/team.c:1933 do_set_master net/core/rtnetlink.c:2358 [inline] do_set_master+0x1d4/0x230 net/core/rtnetlink.c:2332 do_setlink+0x966/0x3510 net/core/rtnetlink.c:2493 rtnl_setlink+0x271/0x3b0 net/core/rtnetlink.c:2747 rtnetlink_rcv_msg+0x465/0xb00 net/core/rtnetlink.c:5192 netlink_rcv_skb+0x17a/0x460 net/netlink/af_netlink.c:2485 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5210 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x536/0x720 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x8ae/0xd70 net/netlink/af_netlink.c:1925 sock_sendmsg_nosec net/socket.c:622 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:632 sock_write_iter+0x27c/0x3e0 net/socket.c:923 call_write_iter include/linux/fs.h:1869 [inline] do_iter_readv_writev+0x5e0/0x8e0 fs/read_write.c:680 do_iter_write fs/read_write.c:956 [inline] do_iter_write+0x184/0x610 fs/read_write.c:937 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1001 do_writev+0xf6/0x290 fs/read_write.c:1036 __do_sys_writev fs/read_write.c:1109 [inline] __se_sys_writev fs/read_write.c:1106 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1106 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x457f29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fc2019bec78 EFLAGS: 00000246 ORIG_RAX: 0000000000000014 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457f29 RDX: 0000000000000001 RSI: 00000000200000c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc2019bf6d4 R13: 00000000004c4a60 R14: 00000000004dd218 R15: 00000000ffffffff Fixes: f421436 ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Arvid Brodin <arvid.brodin@alten.se> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Mar 27, 2019
[ Upstream commit 95d6ebd ] In case of failure x25_connect() does a x25_neigh_put(x25->neighbour) but forgets to clear x25->neighbour pointer, thus triggering use-after-free. Since the socket is visible in x25_list, we need to hold x25_list_lock to protect the operation. syzbot report : BUG: KASAN: use-after-free in x25_kill_by_device net/x25/af_x25.c:217 [inline] BUG: KASAN: use-after-free in x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 Read of size 8 at addr ffff8880a030edd0 by task syz-executor003/7854 CPU: 0 PID: 7854 Comm: syz-executor003 Not tainted 5.0.0+ #97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 __asan_report_load8_noabort+0x14/0x20 mm/kasan/generic_report.c:135 x25_kill_by_device net/x25/af_x25.c:217 [inline] x25_device_event+0x296/0x2b0 net/x25/af_x25.c:252 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x1e9/0x2c0 net/core/dev.c:7607 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x4467c9 Code: e8 0c e8 ff ff 48 83 c4 18 c3 0f 1f 80 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 5b 07 fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fdbea222d98 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00000000006dbc58 RCX: 00000000004467c9 RDX: 0000000020000340 RSI: 0000000000008914 RDI: 0000000000000003 RBP: 00000000006dbc50 R08: 00007fdbea223700 R09: 0000000000000000 R10: 00007fdbea223700 R11: 0000000000000246 R12: 00000000006dbc5c R13: 6000030030626669 R14: 0000000000000000 R15: 0000000030626669 Allocated by task 7843: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_kmalloc mm/kasan/common.c:495 [inline] __kasan_kmalloc.constprop.0+0xcf/0xe0 mm/kasan/common.c:468 kasan_kmalloc+0x9/0x10 mm/kasan/common.c:509 kmem_cache_alloc_trace+0x151/0x760 mm/slab.c:3615 kmalloc include/linux/slab.h:545 [inline] x25_link_device_up+0x46/0x3f0 net/x25/x25_link.c:249 x25_device_event+0x116/0x2b0 net/x25/af_x25.c:242 notifier_call_chain+0xc7/0x240 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 [inline] raw_notifier_call_chain+0x2e/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x3f/0x90 net/core/dev.c:1739 call_netdevice_notifiers_extack net/core/dev.c:1751 [inline] call_netdevice_notifiers net/core/dev.c:1765 [inline] __dev_notify_flags+0x121/0x2c0 net/core/dev.c:7605 dev_change_flags+0x10d/0x170 net/core/dev.c:7643 dev_ifsioc+0x2b0/0x940 net/core/dev_ioctl.c:237 dev_ioctl+0x1b8/0xc70 net/core/dev_ioctl.c:488 sock_do_ioctl+0x1bd/0x300 net/socket.c:995 sock_ioctl+0x32b/0x610 net/socket.c:1096 vfs_ioctl fs/ioctl.c:46 [inline] file_ioctl fs/ioctl.c:509 [inline] do_vfs_ioctl+0xd6e/0x1390 fs/ioctl.c:696 ksys_ioctl+0xab/0xd0 fs/ioctl.c:713 __do_sys_ioctl fs/ioctl.c:720 [inline] __se_sys_ioctl fs/ioctl.c:718 [inline] __x64_sys_ioctl+0x73/0xb0 fs/ioctl.c:718 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 7865: save_stack+0x45/0xd0 mm/kasan/common.c:73 set_track mm/kasan/common.c:85 [inline] __kasan_slab_free+0x102/0x150 mm/kasan/common.c:457 kasan_slab_free+0xe/0x10 mm/kasan/common.c:465 __cache_free mm/slab.c:3494 [inline] kfree+0xcf/0x230 mm/slab.c:3811 x25_neigh_put include/net/x25.h:253 [inline] x25_connect+0x8d8/0xde0 net/x25/af_x25.c:824 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe The buggy address belongs to the object at ffff8880a030edc0 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 16 bytes inside of 256-byte region [ffff8880a030edc0, ffff8880a030eec0) The buggy address belongs to the page: page:ffffea000280c380 count:1 mapcount:0 mapping:ffff88812c3f07c0 index:0x0 flags: 0x1fffc0000000200(slab) raw: 01fffc0000000200 ffffea0002806788 ffffea00027f0188 ffff88812c3f07c0 raw: 0000000000000000 ffff8880a030e000 000000010000000c 0000000000000000 page dumped because: kasan: bad access detected Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot+04babcefcd396fabec37@syzkaller.appspotmail.com Cc: andrew hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
crow-misia
pushed a commit
to crow-misia/linux
that referenced
this pull request
Apr 4, 2019
[ Upstream commit e5dcc0c ] rose_write_internal() uses a temp buffer of 100 bytes, but a manual inspection showed that given arbitrary input, rose_create_facilities() can fill up to 110 bytes. Lets use a tailroom of 256 bytes for peace of mind, and remove the bounce buffer : we can simply allocate a big enough skb and adjust its length as needed. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline] BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline] BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854 CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ beagleboard#97 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:131 memcpy include/linux/string.h:352 [inline] rose_create_facilities net/rose/rose_subr.c:521 [inline] rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116 rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826 __sys_connect+0x266/0x330 net/socket.c:1685 __do_sys_connect net/socket.c:1696 [inline] __se_sys_connect net/socket.c:1693 [inline] __x64_sys_connect+0x73/0xb0 net/socket.c:1693 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458079 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079 RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4 R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03 >ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3 ^ ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00 ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01 Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
Apr 22, 2020
[ Upstream commit b09fe70 ] There was a bug that was causing packets to be sent to the driver without first calling dequeue() on the "child" qdisc. And the KASAN report below shows that sending a packet without calling dequeue() leads to bad results. The problem is that when checking the last qdisc "child" we do not set the returned skb to NULL, which can cause it to be sent to the driver, and so after the skb is sent, it may be freed, and in some situations a reference to it may still be in the child qdisc, because it was never dequeued. The crash log looks like this: [ 19.937538] ================================================================== [ 19.938300] BUG: KASAN: use-after-free in taprio_dequeue_soft+0x620/0x780 [ 19.938968] Read of size 4 at addr ffff8881128628cc by task swapper/1/0 [ 19.939612] [ 19.939772] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc3+ #97 [ 19.940397] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qe4 [ 19.941523] Call Trace: [ 19.941774] <IRQ> [ 19.941985] dump_stack+0x97/0xe0 [ 19.942323] print_address_description.constprop.0+0x3b/0x60 [ 19.942884] ? taprio_dequeue_soft+0x620/0x780 [ 19.943325] ? taprio_dequeue_soft+0x620/0x780 [ 19.943767] __kasan_report.cold+0x1a/0x32 [ 19.944173] ? taprio_dequeue_soft+0x620/0x780 [ 19.944612] kasan_report+0xe/0x20 [ 19.944954] taprio_dequeue_soft+0x620/0x780 [ 19.945380] __qdisc_run+0x164/0x18d0 [ 19.945749] net_tx_action+0x2c4/0x730 [ 19.946124] __do_softirq+0x268/0x7bc [ 19.946491] irq_exit+0x17d/0x1b0 [ 19.946824] smp_apic_timer_interrupt+0xeb/0x380 [ 19.947280] apic_timer_interrupt+0xf/0x20 [ 19.947687] </IRQ> [ 19.947912] RIP: 0010:default_idle+0x2d/0x2d0 [ 19.948345] Code: 00 00 41 56 41 55 65 44 8b 2d 3f 8d 7c 7c 41 54 55 53 0f 1f 44 00 00 e8 b1 b2 c5 fd e9 07 00 3 [ 19.950166] RSP: 0018:ffff88811a3efda0 EFLAGS: 00000282 ORIG_RAX: ffffffffffffff13 [ 19.950909] RAX: 0000000080000000 RBX: ffff88811a3a9600 RCX: ffffffff8385327e [ 19.951608] RDX: 1ffff110234752c0 RSI: 0000000000000000 RDI: ffffffff8385262f [ 19.952309] RBP: ffffed10234752c0 R08: 0000000000000001 R09: ffffed10234752c1 [ 19.953009] R10: ffffed10234752c0 R11: ffff88811a3a9607 R12: 0000000000000001 [ 19.953709] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000 [ 19.954408] ? default_idle_call+0x2e/0x70 [ 19.954816] ? default_idle+0x1f/0x2d0 [ 19.955192] default_idle_call+0x5e/0x70 [ 19.955584] do_idle+0x3d4/0x500 [ 19.955909] ? arch_cpu_idle_exit+0x40/0x40 [ 19.956325] ? _raw_spin_unlock_irqrestore+0x23/0x30 [ 19.956829] ? trace_hardirqs_on+0x30/0x160 [ 19.957242] cpu_startup_entry+0x19/0x20 [ 19.957633] start_secondary+0x2a6/0x380 [ 19.958026] ? set_cpu_sibling_map+0x18b0/0x18b0 [ 19.958486] secondary_startup_64+0xa4/0xb0 [ 19.958921] [ 19.959078] Allocated by task 33: [ 19.959412] save_stack+0x1b/0x80 [ 19.959747] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 19.960222] kmem_cache_alloc+0xe4/0x230 [ 19.960617] __alloc_skb+0x91/0x510 [ 19.960967] ndisc_alloc_skb+0x133/0x330 [ 19.961358] ndisc_send_ns+0x134/0x810 [ 19.961735] addrconf_dad_work+0xad5/0xf80 [ 19.962144] process_one_work+0x78e/0x13a0 [ 19.962551] worker_thread+0x8f/0xfa0 [ 19.962919] kthread+0x2ba/0x3b0 [ 19.963242] ret_from_fork+0x3a/0x50 [ 19.963596] [ 19.963753] Freed by task 33: [ 19.964055] save_stack+0x1b/0x80 [ 19.964386] __kasan_slab_free+0x12f/0x180 [ 19.964830] kmem_cache_free+0x80/0x290 [ 19.965231] ip6_mc_input+0x38a/0x4d0 [ 19.965617] ipv6_rcv+0x1a4/0x1d0 [ 19.965948] __netif_receive_skb_one_core+0xf2/0x180 [ 19.966437] netif_receive_skb+0x8c/0x3c0 [ 19.966846] br_handle_frame_finish+0x779/0x1310 [ 19.967302] br_handle_frame+0x42a/0x830 [ 19.967694] __netif_receive_skb_core+0xf0e/0x2a90 [ 19.968167] __netif_receive_skb_one_core+0x96/0x180 [ 19.968658] process_backlog+0x198/0x650 [ 19.969047] net_rx_action+0x2fa/0xaa0 [ 19.969420] __do_softirq+0x268/0x7bc [ 19.969785] [ 19.969940] The buggy address belongs to the object at ffff888112862840 [ 19.969940] which belongs to the cache skbuff_head_cache of size 224 [ 19.971202] The buggy address is located 140 bytes inside of [ 19.971202] 224-byte region [ffff888112862840, ffff888112862920) [ 19.972344] The buggy address belongs to the page: [ 19.972820] page:ffffea00044a1800 refcount:1 mapcount:0 mapping:ffff88811a2bd1c0 index:0xffff8881128625c0 compo0 [ 19.973930] flags: 0x8000000000010200(slab|head) [ 19.974388] raw: 8000000000010200 ffff88811a2ed650 ffff88811a2ed650 ffff88811a2bd1c0 [ 19.975151] raw: ffff8881128625c0 0000000000190013 00000001ffffffff 0000000000000000 [ 19.975915] page dumped because: kasan: bad access detected [ 19.976461] page_owner tracks the page as allocated [ 19.976946] page last allocated via order 2, migratetype Unmovable, gfp_mask 0xd20c0(__GFP_IO|__GFP_FS|__GFP_NO) [ 19.978332] prep_new_page+0x24b/0x330 [ 19.978707] get_page_from_freelist+0x2057/0x2c90 [ 19.979170] __alloc_pages_nodemask+0x218/0x590 [ 19.979619] new_slab+0x9d/0x300 [ 19.979948] ___slab_alloc.constprop.0+0x2f9/0x6f0 [ 19.980421] __slab_alloc.constprop.0+0x30/0x60 [ 19.980870] kmem_cache_alloc+0x201/0x230 [ 19.981269] __alloc_skb+0x91/0x510 [ 19.981620] alloc_skb_with_frags+0x78/0x4a0 [ 19.982043] sock_alloc_send_pskb+0x5eb/0x750 [ 19.982476] unix_stream_sendmsg+0x399/0x7f0 [ 19.982904] sock_sendmsg+0xe2/0x110 [ 19.983262] ____sys_sendmsg+0x4de/0x6d0 [ 19.983660] ___sys_sendmsg+0xe4/0x160 [ 19.984032] __sys_sendmsg+0xab/0x130 [ 19.984396] do_syscall_64+0xe7/0xae0 [ 19.984761] page last free stack trace: [ 19.985142] __free_pages_ok+0x432/0xbc0 [ 19.985533] qlist_free_all+0x56/0xc0 [ 19.985907] quarantine_reduce+0x149/0x170 [ 19.986315] __kasan_kmalloc.constprop.0+0x9e/0xd0 [ 19.986791] kmem_cache_alloc+0xe4/0x230 [ 19.987182] prepare_creds+0x24/0x440 [ 19.987548] do_faccessat+0x80/0x590 [ 19.987906] do_syscall_64+0xe7/0xae0 [ 19.988276] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 19.988775] [ 19.988930] Memory state around the buggy address: [ 19.989402] ffff888112862780: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 19.990111] ffff888112862800: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb [ 19.990822] >ffff888112862880: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 19.991529] ^ [ 19.992081] ffff888112862900: fb fb fb fb fc fc fc fc fc fc fc fc fc fc fc fc [ 19.992796] ffff888112862980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc Fixes: 5a781cc ("tc: Add support for configuring the taprio scheduler") Reported-by: Michael Schmidt <michael.schmidt@eti.uni-siegen.de> Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Acked-by: Andre Guedes <andre.guedes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
RobertCNelson
pushed a commit
that referenced
this pull request
May 14, 2021
commit 92063f3 upstream. The kernel may be built with multiple LSMs, but only a subset may be enabled on the boot command line by specifying "lsm=". Not including "integrity" on the ordered LSM list may result in a NULL deref. As reported by Dmitry Vyukov: in qemu: qemu-system-x86_64 -enable-kvm -machine q35,nvdimm -cpu max,migratable=off -smp 4 -m 4G,slots=4,maxmem=16G -hda wheezy.img -kernel arch/x86/boot/bzImage -nographic -vga std -soundhw all -usb -usbdevice tablet -bt hci -bt device:keyboard -net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net nic,model=virtio-net-pci -object memory-backend-file,id=pmem1,share=off,mem-path=/dev/zero,size=64M -device nvdimm,id=nvdimm1,memdev=pmem1 -append "console=ttyS0 root=/dev/sda earlyprintk=serial rodata=n oops=panic panic_on_warn=1 panic=86400 lsm=smack numa=fake=2 nopcid dummy_hcd.num=8" -pidfile vm_pid -m 2G -cpu host But it crashes on NULL deref in integrity_inode_get during boot: Run /sbin/init as init process BUG: kernel NULL pointer dereference, address: 000000000000001c PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc2+ #97 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-44-g88ab0c15525c-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc+0x2b/0x370 mm/slub.c:2920 Code: 57 41 56 41 55 41 54 41 89 f4 55 48 89 fd 53 48 83 ec 10 44 8b 3d d9 1f 90 0b 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 <8b> 5f 1c 4cf RSP: 0000:ffffc9000032f9d8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888017fc4f00 RCX: 0000000000000000 RDX: ffff888040220000 RSI: 0000000000000c40 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff888019263627 R10: ffffffff83937cd1 R11: 0000000000000000 R12: 0000000000000c40 R13: ffff888019263538 R14: 0000000000000000 R15: 0000000000ffffff FS: 0000000000000000(0000) GS:ffff88802d180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 000000000b48e000 CR4: 0000000000750ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: integrity_inode_get+0x47/0x260 security/integrity/iint.c:105 process_measurement+0x33d/0x17e0 security/integrity/ima/ima_main.c:237 ima_bprm_check+0xde/0x210 security/integrity/ima/ima_main.c:474 security_bprm_check+0x7d/0xa0 security/security.c:845 search_binary_handler fs/exec.c:1708 [inline] exec_binprm fs/exec.c:1761 [inline] bprm_execve fs/exec.c:1830 [inline] bprm_execve+0x764/0x19a0 fs/exec.c:1792 kernel_execve+0x370/0x460 fs/exec.c:1973 try_to_run_init_process+0x14/0x4e init/main.c:1366 kernel_init+0x11d/0x1b8 init/main.c:1477 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Modules linked in: CR2: 000000000000001c ---[ end trace 22d601a500de7d79 ]--- Since LSMs and IMA may be configured at build time, but not enabled at run time, panic the system if "integrity" was not initialized before use. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 79f7865 ("LSM: Introduce "lsm=" for boottime LSM selection") Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Old drivers for BeagleBone Green/Black are still compatible.