Added virtual ALSA AVB driver #246
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
|
Thanks @NiklasWan ! this looks awesome, i'll merge it tomorrow morning and push it out.. |
hartkopp/can-isotp@ced84ca Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
patch-5.4.52-rt31.patch.xz Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
https://git.zx2c4.com/WireGuard/commit/edad0d6e99e5133b1e8e865d727a25fff6399cb4 Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
http://git.ti.com/gitweb/?p=processor-firmware/ti-amx3-cm3-pm-firmware.git;a=commit;h=6a849767df85ce9399494f53fb5c753665396653 Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
https://github.com/beagleboard/BeagleBoard-DeviceTrees/tree/v5.4.x-ti-overlays beagleboard/BeagleBoard-DeviceTrees@a36668d Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reference: v5.7.10 Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reference: v5.6.19 Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reference: v5.5.19 Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Reference: v5.4.18 Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Set F2 blocksize to 256 bytes for 4373. It fixes DMA error while having UDP bi-directional traffic. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
broken_sg_support, sd_head_align, and sd_sgentry_align are used in brcmfmac code but not configurable in dts file. Add the parsing logic. Now they can be configured like below in dts: brcm,broken_sg_support; brcm,sd_head_align = /bits/ 16 <4>; brcm,sd_sgentry_align = /bits/ 16 <4>; Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
APSTA can work on two band concurrently with using VSDB(Virtual Simultaneous Dual-Band) or RSDB(Real Simultaneous Dual-Band) features. In this case, we have to keep apsta is 1 in firmware side. If we start wpa_supplicant on wlan0 and then start hostapd on wlan1, the apsta will be set to 0, and data will be stall on wlan0(station). Because that, we only set apsta to 0 when AP start on primary interface. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Hostap daemon has a parameter "ap_isolate which is used to prevent low-level bridging of frames between associated stations in the BSS. For driver side, we add cfg80211 ops method change_bss to support setting AP isolation from user space. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
When eap_restrict is enabled, firmware will toss non-802.1x frames from tx/rx data path if station not yet authorized. Internal firmware eap_restrict is disabled by default. This patch makes it possible to enable firmware eap_restrict by specifying eap_restrict=1 as module parameter. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Host driver needs to provide a dummy wowlan filter for kernel and provided the the well configured wowlan stack. So the system will keep driver in connected state in suspend mode and can be wake up by ping packet. Enable unicast packet filter before system suspend and disable it after resume. Signed-off-by: Double Lo <dblo@cypress.com> Signed-off-by: Double Lo <double.lo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Set wowl configuration in disconnect state is redundant. Remove it to fix no scan result issue after resume. Signed-off-by: Double Lo <dblo@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
With setting sdio_wq_highpri=1 in module parameters, tasks submitted to SDIO workqueue will put at the head of the queue and run immediately. This parameter is for getting higher TX/RX throughput with SDIO bus. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
The firmware does not respond ARP request and causes ping failed with following steps. 1. Bring up interface ifconfig wlan0 up or start wpa_supplicant 2. Set the IP address ifconfig wlan0 192.168.100.10 3. Bring down interface or ifconfig wlan0 down or kill wpa_supplicant 4. Bring up interface again and set the same IP address 5. Connect to AP(192.168.100.1) and ping to AP will be failed. FMAC clears arp_hostip when bringing down the interface, but not set it back if setting the same IP address. We are able to see the IP address in interface info(inconfig wlan0) but the ping still cannot work because the firmware ARP offload does not respond the ARP request. Because of that, we remove "arp_hostip_clear" from function "brcmf_netdev_stop" Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
Send P2P Presence Response from the p2p interface address instead of the p2p device address. Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
P2p spec mentioned that the p2p device address should be the globally administered address with locally administered bit set. Therefore, follow this guideline by default. When the primary interface is set to a locally administered address, the locally administered bit cannot be set again. Generate a random locally administered address for this case. Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
commit 2bc50d8 upstream. Will enable FMAC to push more packets to bus tx queue and help improve throughput when fws queuing is enabled. This change is required to tune the throughput for passing WMM CERT tests. Signed-off-by: Madhan Mohan R <madhanmohan.r@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/1585124429-97371-5-git-send-email-chi-hsien.lin@cypress.com
In WLAN, priority among various access categories of traffic is always set by the AP using WMM parameters and this may not always follow the standard 802.1d priority. In this change, priority is adjusted based on the AP WMM params received as part of the Assoc Response and the same is later used to map the priority of all incoming traffic. This change should fix the following 802.11n certification tests: * 5.2.31 ACM Bit Conformance test * 5.2.32 AC Parameter Modification test Signed-off-by: Saravanan Shanmugham <sasm@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
When USB or SDIO device got abnormal bus disconnection, host driver tried to clean up the SKBs in PSQ and TXQ. The SKBs pointer in hanger linked to PSQ and TSQ, so we should set the state of skb hanger slot to BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing skb. In brcmf_fws_bus_txq_cleanup it already set BRCMF_FWS_HANGER_ITEM_STATE_FREE before freeing SKB, therefore we add this in brcmf_fws_psq_flush to avoid following warning message. [ 1580.012880] ------------ [ cut here ]------------ [ 1580.017550] WARNING: CPU: 3 PID: 3065 at drivers/net/wireless/broadcom/brcm80211/brcmutil/utils.c:49 brcmu_pkt_buf_free_skb+0x21/0x30 [brcmutil] [ 1580.184017] Call Trace: [ 1580.186514] brcmf_fws_cleanup+0x14e/0x190 [brcmfmac] [ 1580.191594] brcmf_fws_del_interface+0x70/0x90 [brcmfmac] [ 1580.197029] brcmf_proto_bcdc_del_if+0xe/0x10 [brcmfmac] [ 1580.202418] brcmf_remove_interface+0x69/0x190 [brcmfmac] [ 1580.207888] brcmf_detach+0x90/0xe0 [brcmfmac] [ 1580.212385] brcmf_usb_disconnect+0x76/0xb0 [brcmfmac] [ 1580.217557] usb_unbind_interface+0x72/0x260 [ 1580.221857] device_release_driver_internal+0x141/0x200 [ 1580.227152] device_release_driver+0x12/0x20 [ 1580.231460] bus_remove_device+0xfd/0x170 [ 1580.235504] device_del+0x1d9/0x300 [ 1580.239041] usb_disable_device+0x9e/0x270 [ 1580.243160] usb_disconnect+0x94/0x270 [ 1580.246980] hub_event+0x76d/0x13b0 [ 1580.250499] process_one_work+0x144/0x360 [ 1580.254564] worker_thread+0x4d/0x3c0 [ 1580.258247] kthread+0x109/0x140 [ 1580.261515] ? rescuer_thread+0x340/0x340 [ 1580.265543] ? kthread_park+0x60/0x60 [ 1580.269237] ? SyS_exit_group+0x14/0x20 [ 1580.273118] ret_from_fork+0x25/0x30 [ 1580.300446] ------------ [ cut here ]------------ Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
commit 837482e upstream. With firmware RSDB feature 1. The maximum support interface is four. 2. The maximum difference channel is two. 3. The maximum interfaces of {station/p2p client/AP} are two. 4. The maximum interface of p2p device is one. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
commit 2635853 upstream. With RSDB mode, FMAC and firmware are able to create 2 or more AP, so we should not set mbss in vif structure if firmware does not support MBSS feature. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Soeren Moch <smoch@web.de> Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
With RSDB feature, firmware is able to support two P2P-AGO or two P2P-GC at the same time. So we add the second p2p connection type to maps to driver's second P2P connection bsscfg. Signed-off-by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Chi-hsien Lin <chi-hsien.lin@cypress.com>
commit 6581154be4a2b0f77ff789b09fade7c14ec3078c upstream. BCM4359 is a 2x2 802.11 abgn+ac Dual-Band HT80 combo chip and it supports Real Simultaneous Dual Band feature. Based on a similar patch by: Wright Feng <wright.feng@cypress.com> Signed-off-by: Soeren Moch <smoch@web.de> Acked-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
commit be898fe upstream. With FT-802.1X, driver should send a port authorized event right after sending a roamed event. It is used to indicate that a new AP is already authorized so 802.1X is not required. Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com> Signed-off-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
NiklasWan
force-pushed
the
submission_gsoc_avb
branch
from
cad4b49
to
6e936f9
Compare
NiklasWan
force-pushed
the
submission_gsoc_avb
branch
from
6e936f9
to
7f60543
Compare
|
@RobertCNelson I resolved conflicts due to new merges and rebased all changes onto HEAD. Let me know if there are any issues. |
RobertCNelson
force-pushed
the
5.4-rt
branch
from
b533d1d
to
36e5010
Compare
RobertCNelson
force-pushed
the
5.4-rt
branch
2 times, most recently
from
681c6fa
to
3fef3b8
Compare
RobertCNelson
force-pushed
the
5.4-rt
branch
2 times, most recently
from
dd2e1d9
to
b687de1
Compare
RobertCNelson
force-pushed
the
5.4-rt
branch
3 times, most recently
from
a0eb9c6
to
f1d27f8
Compare
RobertCNelson
force-pushed
the
5.4-rt
branch
2 times, most recently
from
1296885
to
1ec7015
Compare
RobertCNelson
force-pushed
the
5.4-rt
branch
2 times, most recently
from
35c83cd
to
99cce5a
Compare
RobertCNelson
force-pushed
the
5.4-rt
branch
from
3ab269b
to
5f60de4
Compare
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
This is a port of the virtual ALSA AVB driver by indu for BBB and BBAI. It is based on: https://github.com/induarun9086/beagleboard-linux/blob/4.4/sound/drivers/avb.c
It was implemented during GSoC 2020 for the project Media Ip Streaming.
Usage description and documentation can be found here: https://niklaswan.github.io/GSoC-Overview/avb-alsa/