FeatureSupport
Andrew Rapp edited this page Dec 31, 2016
·
1 revision
The following API types are supported:
XBee (802.15.4 and ZNet/ZB Pro):
- AT Command (0x08)
- AT Command Response (0x88)
- AT Command - Queue Parameter Value (0x09)
- Modem Status (0x8A)
XBee series 1 (802.15.4):
- 16/64-bit RX I/O Sample (0x83, 0x82)
- TX (Transmit) Request: 64-bit address (0x00)
- TX (Transmit) Request: 16-bit address (0x01)
- TX (Transmit) Status (0x89)
- RX (Receive) Packet: 64-bit Address (0x80)
- RX (Receive) Packet: 16-bit Address (0x81)
XBee series 2 (ZNet/ZB Pro):
- ZigBee Transmit Request (0x10)
- ZigBee Transmit Status (0x8B)
- ZigBee Receive Packet (AO=0) (0x90)
- ZigBee IO Data Sample Rx Indicator (0x92)
- Remote Command Request (0x17)
- Remote Command Response (0x97)
- Explicit Addressing ZigBee Command Frame (0x11)
- ZigBee Explicit Rx Indicator (0x91)
- Node Identification Indicator (AO=0) (0x95)
Not supported at this time: XBee Sensor Read Indicator (AO=0)