#Tempus Fugit 3D Printed Case

This is my first attempt at a case for my Tempus Fugit Word Clock (using a Pi Zero). This will not be suitable for use with an Arduino/Genunio Nano as the power connector is in a different location. The case is designed to be wall mounted.

Please print 1 each of the following:

• TF Case - Front.stl
• TF Case - Back.stl
• TF Case - Buttons.stl

The case was designed in Autodesk 123D Design - the original design files are included.

Resolution/layer height is 0.2mm. This was designed to be printed on a FlashForge Creator Pro with a 0.4mm nozzle.

This can also be found on Thingiverse here!