This program allows for controlling a camera using the VISCA protocol along with the RS-232 communication standard.
The supported commands enable the camera to be oriented in all directions. These commands are located in the CameraVisca.h and CameraVisca.cpp files and can be modified using the VISCA commands listed in this manual.
Depending on the camera configuration (whether it is intended to be mounted upside down or not), it is possible that the directions may be inverted.
- Windows
- Arduino Mega
- CMake or an IDE supporting CMake
- Arduino IDE or an IDE supporting Arduino SDK (e.g., Visual Studio with the vMicro extension)
In SerialPC.hpp, check and redefine if necessary the COM port number being used. You can find this number in the Device Manager.
static const char* device = "\\\\.\\COM6"; // Définition du port
You can now compile and run the program using CMake or any development environment that includes CMake.
Control is done using the ZQSD keys. You can now control the camera!
In KeyboardArduino.hpp, check and redefine if necessary the pins corresponding to the connections of your buttons (currently configured for Up: pin 52, Down: pin 46, Right: pin 50, Left: pin 48).
Open ProjetCamera.ino in Arduino IDE or another IDE capable of uploading a program to your Arduino.
Upload the code. You can now control the camera!