Software part of racing setup i just making. Software is builded and tested on Arduino Leonardo.
Pedals: https://www.thingiverse.com/thing:4550372
- Keyboard mode(for NFS and...) ☒ (Manual issue ,working on stls...)
- Classic (Potentiometer) mode (10KΩ) ☑ (..in progress)
Steering Whell:
https://www.thingiverse.com/thing:3663155
Based on Thrustmaster T80 body QR adapter is in /stl folder
- Potetiometer mode (10KΩ) ☑
- Buttons: 10X 12mm Self-locking and Classic ☑
- Rotary controls :3X (10KΩ) potentiometer ☑
Paddle Shifters:
would be taken from here : https://www.thingiverse.com/thing:4058270 ☒ (..in progress)
Usage:
- clone this repo
- open .ino file in IDE
- install Vector.h lib https://www.arduino.cc/reference/en/libraries/vector/
- install Joystick.h lib https://github.com/MHeironimus/ArduinoJoystickLibrary
- upload your code to device
Testing:
- testing site: https://hardwaretester.com/gamepad
TODO:
- add wirring
- make some universal roraty controll and buttons
- add some tut texts
- upload f1 22 controller preset