Table of Contents

• Navigating the Repository
• Change Log
• Installation
• Required Tools
• Examples List
• Tools
• References
• FAQ
• Versioning BLE-Stack Projects

Introduction

This repository contains Bluetooth® Low Energy & Proprietary RF sample applications for Texas Instruments' SimpleLink CC13xx / CC26xx SDK, SimpleLink CC2640R2 SDK, and SimpleLink Low Power F3 SDK.

These examples are each hosted on different branches of this repo. Please reference the table below to find examples for each of these SDKs.

These examples have not been validated as production-ready.

Do not use GitHub's bug tracking feature for support. For inquiries, see the Bluetooth® low energy Forum and the Other Wireless Technologies Forum.

To use the examples and tools in this repository, please download and install the relevant SDK listed in a given branch first, and if necessary obtain the required evaluation kit:

If you have any questions please refer to the FAQ page.

SDK	Examples
TI SimpleLink Low Power F3 SDK 7.40.00.00	Data Stream UART over BLE example Basic BLE GATT Client example UART RF Carrier Wave Serial Boot Loader Tool v1.0.0 (SDK version independent)
TI SimpleLink Low Power F3 SDK 7.20.00.00	Data Stream UART over BLE example Basic BLE GATT Client example Serial Boot Loader Tool v1.0.0 (SDK version independent)
TI SimpleLink CC13xx / CC26xx SDK 6.4x.xx.xx	Simple Serial Socket (for CC2651R3SIPA only)
TI SimpleLink CC13x2 / CC26x2 SDK 5.10.00.00	Simple Serial Socket Bluetooth 5 Throughput Demo
TI SimpleLink CC13x2 / CC26x2 SDK 4.10.00.00	Simple Serial Socket Bluetooth 5 Throughput Demo
TI SimpleLink CC13x2 / CC26x2 SDK 3.20.00.67	Simple Serial Socket Bluetooth 5 Throughput Demo Tree Structure Network
TI SimpleLink CC13x2 / CC26x2 SDK 2.40.00.81	Simple Serial Socket
TI SimpleLink CC26x2 SDK 2.30.00.34	Full Duplex Bidirectional Audio Demo (Central/Peripheral) I2S Echo Serial Port Profile Bluetooth 5 Throughput Demo Tree Structure Network
TI SimpleLink CC26x2 SDK 2.10.00.44	Full Duplex Bidirectional Audio Demo (Central/Peripheral) I2S Echo Serial Port Profile
TI SimpleLink CC26x2 SDK 1.60.00.43	Full Duplex Bidirectional Audio Demo (Central/Peripheral) I2S Echo Serial Port Profile
TI SimpleLink CC2640R2 SDK 2.20.00.49	Simple Serial Socket Micro BLE Stack Broadcaster Observer Bidirectional Audio Simple Peripheral Observer Apple Notification Center Service
TI SimpleLink CC2640R2 SDK 1.50.00.58	Micro BLE Stack Broadcaster + Observer Full Duplex Bidirectional Audio Demo Serial Port Profile Simple Peripheral Observer BLE Apple Notification Center Service
TI SimpleLink CC2640R2 SDK 1.40.00.45	Full Duplex Bidirectional Audio Demo Bluetooth 5 Throughput Demo Bluetooth 5 Long Range Demo Serial Port Profile Simple Peripheral Observer BLE Apple Notification Center Service
TI SimpleLink CC2640R2 SDK 1.35.00.33	Bluetooth 5 Throughput Demo Bluetooth 5 Long Range Demo Serial Port Profile
TI BLE-Stack SDK v2.2.x	beacon_rfdriver hid_adv_remote_privacy hid_emu_kbd multi_role security_examples simple_beacon simple_central_lp simple_central_audio_receiver simple_peripheral_audio_transmitter simple_eddystone simple_peripheral_observer simple_proprietary_beacon spp_over_ble throughput_example serial_bootloader central_to_multiperipheral
TI BLE-Stack SDK v2.1.x	SimpleAP SimpleNP MultiRole SimpleBLEPeripheral: LCD to UART SimpleBLEPeripheral: porting to TI-RTOS 2.15 Apple Notification Center Service

Navigating the Repository

The examples provided on this GitHub page serve as a plugin to a corresponding BLE-Stack SDK release. The master branch will always point to the latest release.

Older releases can be accessed by checking out/downloading their corresponding branch. For more information on supported examples please consult the readme.md of the desired branch/release.

Change Log

Note: The version numbers below are related to GitHub ble_examples releases. The numbering scheme is in the form of M.mm.pp.bb. The fields pp.bb are incremented as GitHub examples are released, M.mm will map a GitHub release to a SimpleLink SDK release.

SimpleLink Low Power F3 SDK Examples 7.40.00.00

Update of the examples for SimpleLinK Low Power F3 SDK (CC23XX) & Serial Boot Loader tool. Addition of UART

7.20.00.00

First release of the examples for SimpleLinK Low Power F3 SDK (CC23XX) & Serial Boot Loader tool.

6.40.00.00

First release of the examples for CC2651R3SIPA.

5.10.00.00

Update of the examples to CC13x2 / CC26x2 SDK 5.10.00.00. Only supports CC26x2R1.

4.10.00.00

Update of the examples to CC13x2 / CC26x2 SDK 4.10.00.00. First release of the examples for CC1352R1.

3.20.00.00

Initial offering of SimpleLink CC13x2 / CC26x2 SDK 3.20.00.67 examples, supporting the rev. E of the SimpleLinkCC26x2 and CC13x2 MCUs.

2.40.00.00

Initial offering of SimpleLink CC13x2 / CC26x2 SDK 2.40.00.81 examples.

Installation

This repository can be cloned and tracked using Git. For instructions on how to clone a repository from GitHub please refer to this guide: Clone from GitHub

For users who are unfamiliar with Git, there is the option of downloading the contents of the repository as a zip file. See instructions below.

1. Click the green "Clone or download" button
2. Select "Download ZIP" option
3. Zip folder will appear in your Downloads folder

This repository can be cloned/download anywhere on your computer. There is a dependency between this repository and the SimpleLink CC26x2 SDK install location.

By default, your chosen SDK will install to C:\ti\

If the SimpleLink SDK must be installed to a different location, then see the FAQ page for IDE specific instructions for changing environment variables.

Required Tools

Similar to the SimpleLink SDK, the examples in this repository support the CCS and IAR toolchains (not for all the examples). Please pay careful attention to versions of these tools, please refer to the release notes for supported versions.

For more information on toolchain setup, please refer to our FAQ page.

FAQ

The FAQ page will try to address some of the common questions related to the ble_examples repo.

References

The following reference pages may be helpful during general Bluetooth Low Energy development. New users of the SimpleLink Low Power F3 platform and Bluetooth 5 development are encouraged to read the BLE5-Stack User's Guide.

As an additional resource, users are encouraged to complete the SimpleLink Academy training.

Other resources can be found below:

• BLE E2E Page