A simple web UI for controlling the GPIO pins on a Raspberry Pi.
To setup make sure you have flask installed
sudo apt install python3-pip libpython3-dev
sudo pip3 install setuptools wheel
sudo pip3 install flask pyyaml
Clone the repo and create a config file named config.yml in the repo folder. Define pin numbers, in BCM format, grouped into "Rooms" and "Appliances" in config.yml. See exampleconfig.yml for reference
git clone https://github.com/ThisIsQasim/WebGPIO
cd WebGPIO
cp exampleconfig.yml config.yml
Run with python
python3 backend.py
Access the UI at http://pi_ip_address:8000