Skip to content

Releases: SoftFever/OrcaSlicer

OrcaSlicer Nightly Builds

22 Jan 14:49
@SoftFever SoftFever
nightly-builds
1bb8fad
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
OrcaSlicer Nightly Builds Pre-release
Pre-release

Welcome to the Nightly Build Release Page for Orca Slicer!

What is a Nightly Build?

Nightly builds are the latest versions of Orca Slicer, automatically compiled after every new commit to the main branch. This means that each build incorporates the most recent changes and improvements. While these builds offer a glimpse into the ongoing development of Orca Slicer, keep in mind that they are still works in progress and may contain bugs or unstable features.

Download Instructions:

  1. Select the version that corresponds to your operating system.
  2. Download and install the build.
  3. Dive into the newest features and improvements!

Please Note:

  • Nightly builds are developmental and may contain bugs.
  • Your feedback is crucial. Please report any issues or suggestions on our GitHub page.

Thank You for Supporting Orca Slicer!

Your active participation and feedback are key to our continuous improvement. Enjoy exploring the forefront of FDM printing technology!

Assets 8

OrcaSlicer V2.0.0 Official Release

30 Mar 07:33
@SoftFever SoftFever
v2.0.0
a187356
This commit was created on GitHub.com and signed with GitHub’s verified signature.
GPG key ID: B5690EEEBB952194
Learn about vigilant mode.
Compare
Choose a tag to compare
OrcaSlicer V2.0.0 Official Release Latest
Latest

This is the OrcaSlicer V2.0.0 Official release.

This update introduces some enhancements and fixes several bugs.

For the complete list of new features introduced in Orca Slicer v2.0, please visit the OrcaSlicer V2.0.0 Beta Release Note and the OrcaSlicer V2.0.0 RC Release Note

What's Changed

  • Add overhang threshold for scarf joint seam by @SoftFever in #4725

    This is the latest effort in the ongoing improvement of the scarf joint seam. This new feature introduces an overhang threshold for the scarf joint seam, allowing users to set a threshold for the overhang angle to prevent the application of the scarf joint seam. This improvement is based on the observation that the scarf joint seam, in general, doesn't play well with steep overhangs.

    image
    Meanwhile, the 'Scarf joint flow ratio' option has been moved to dev mode only, as its utility remains unclear based on testing results. Thanks to Adam (@psiberfunk) for the testing and feedback. You can enable dev mode to use this feature.

  • Fix issue that print host and webui settings are not properly reset by @Noisyfox in #4734

  • Fix 3rd party login issue on macOS by @Noisyfox in #4739

  • gui: fix media eject on linux (#4700) by @buzzhuzz in #4701

  • Fixes #2992 - emboss numbers for 290-305 by @jamincollins in #4742

Profiles:

Translations:

Support

If you appreciate my work and would like to support me, consider buying me a coffee.
Your support is greatly appreciated! :)
ko-fi

Contributors

Noisyfox, jamincollins, and 9 other contributors
Assets 8

OrcaSlicer V2.0.0 RC Release

24 Mar 00:53
@SoftFever SoftFever
v2.0.0-rc
2841476
Compare
Choose a tag to compare
OrcaSlicer V2.0.0 RC Release Pre-release
Pre-release

This is the OrcaSlicer V2.0.0 RC release.

This update introduces some new features and fixes some bugs found in the V2.0.0 Beta.

What's Changed

  • Rewriten 3D Honeycomb infill by @gringer in #4425

    Are you ready to embrace your new favorite infill pattern? Allow me to introduce the revamped 3D Honeycomb infill. The current 3D Honeycomb infill pattern includes many bridges, making it less than ideal for high-speed printing and resulting in reduced strength. However, the improved 3D Honeycomb significantly reduces bridging, providing better strength and print quality. It offers similar strength to Gyroid infill but prints faster, thanks to requiring fewer direction changes.

    @gringer is the original author of the 3D Honeycomb implementation in Slic3r too(and hence in OrcaSlicer/PrusaSlicer/SuperSlicer/BambuStudio/etc...)
    bridge_fix_animation

    My stress testing shows that the new 3D Honeycomb infill can handle fast printing (200mm/s) without breaking a sweat.
    The following test was performed on a Prusa MK4 printer:
    Actual infill print speed: 200mm/s
    Filament: PETG
    Infill pattern: new 3D Honeycomb

    image

  • Tweak the home page in OrcaSlicer by @SoftFever in #4602

    1. Add a new preference option to explicitly and easily enable/disable the Bambu network plugin.
    2. Show/hide the user login panel in the Home tab automatically according to the new option. This should give users who don't use Bambu machines or accounts a clean startup interface.
      login panel

  • Tweak OrcaSlicer log by @SoftFever

    1. set default logging level to warning and make it configurable in .conf file
    2. deprecate severity_level, use log_severity_level config key
    3. remove encrytped bbl debug_network log file

  • Revised Inner Outer Inner mode by @igiannakas in #4417 and #4416

  • Support new network connections to printer:

    1. Support for SimplyPrint cloud integration by @Noisyfox in #4525
      You can find more information about the SimplyPrint connection here: https://help.simplyprint.io/en/article/the-orcaslicer-simplyprint-integration-how-to-set-up-and-use-1miu532/
    2. Falashforge 5M network support by @iherbak in #4546

  • Fix an issue that only 1 bottom/top will be generated when ensure vertical thickness is set to None by @SoftFever in #4504
    image

  • Fixed an issue that changing printer selection clears out Process overrides by @SoftFever in #4506 issue #4145

  • Fix alternate extra wall warning: change ensure vertical shell thickness to Moderate instead of None by @SoftFever in #4463

  • Revert automatic application of reduced internal bridge filtering for lightning infill by @igiannakas in #4639

  • Fix startup crashes caused by splash screen by @SoftFever

  • Prevent crashes from edge cases when slicing complex small model with "big" fuzzy skin is used by @SoftFever

  • Fix issue that painter sphere is rendered at the wrong position by @Noisyfox in #4652

  • Fixed a bug that promption of installing plugin notification was not displayed when trying to switch to Bambu device tab by @SoftFever

Profiles:

Translations:

Miscs:

Support

If you appreciate my work and would like to support me, consider buying me a coffee.
Your support is greatly appreciated! :)
ko-fi

Contributors

bistory, gringer, and 21 other contributors
Assets 7

OrcaSlicer V2.0.0 Beta Release

12 Mar 11:58
@SoftFever SoftFever
v2.0.0-beta
eb5a1bc
Compare
Choose a tag to compare
OrcaSlicer V2.0.0 Beta Release Pre-release
Pre-release

What's Changed

This is OrcaSlicer V2.0.0 beta release.
This update introduces innovative new features and a lot of bug fixes and improvements.

  • Scarf joint seam: an innovative apprach to hide seams for FDM printing by @Noisyfox

    You probably have already heard of the "scarf joint" feature implemented in OrcaSlicer through forum/YouTube videos.
    It's a exicting new way to hide the seams in FDM printing.
    image

    scarf

    Main implementation is done by @Noisyfox in #3839

    Conditional scarf joint and slowdown for scarf joint only feature is done by @SoftFever in #4317

    A big shoutout to @vgdh and @MichaelJLew for coming up with this brilliant idea and the early-stage prototype

    A heartfelt thank you to everyone who participated in the testing and discussion, look at how many people are involved in the PR thread!
    image

    Adam(@psiberfunk) has done incredible scientific experiments. He wrote a great guide on how to use this feature, do check it out.

    Michael(TeachingTech) made a fantastic YouTube video to explain this feature, do check it out.

  • Small area flow compensation by @mjonuschat in #3334
    A feature aimed at addressing the challenge of over-extrusion in small areas of solid infill, an issue previously not well understood. By implementing a strategy that adjusts extrusion flow inversely proportional to the length of the extrusion line, we ensure that shorter lines receive less flow. This approach is visually represented in the software, with color coding—blue for reduced flow and red for increased flow—to clearly show the effect of the adjustments. This feature is designed to enhance print quality by providing a practical solution to the over-extrusion problem, making it easier for users to achieve consistent results across their prints.

    image
    image

    Big shoutout to @Alexander-T-Moss, who first came up with this innovative improvement and implemented it with scripts.

  • Orca Slicer now support OTA profile update for all 3d printers by @SoftFever in #4069
    image

  • QoL: 3D navigator by @Noisyfox in #4181

    viewbox
    You can turn it off in menu

  • Improve gap fill application strategy by @igiannakas in #3412

    gap fill

  • Add direct adaptive bed mesh support by @SoftFever in #4212

    Orca Slicer introduces comprehensive support for adaptive bed meshing across a variety of firmware, including Marlin, Klipper, and RepRapFirmware (RRF).
    This feature allows users to seamlessly integrate adaptive bed mesh commands within the Machine Start G-code.
    The implementation is designed to be straightforward, requiring no additional plugins or alterations to firmware settings, thereby enhancing user experience and print quality directly from Orca Slicer.
    Compared to existing adaptive bed mesh plugins for Klipper, the Orca Slicer implementation can handle max/min bed mesh safety limits to avoid potential crashing into the bed.
    For detailed usage, please refer to the Orca Slicer WIKI.
    Example of Adaptive Bed Mesh usage in Orca Slicer:

    Marlin:

    G29 X{bed_mesh_probe_count[0]} Y{bed_mesh_probe_count[1]} L{adaptive_bed_mesh_min[0]} R{adaptive_bed_mesh_max[0]} F{adaptive_bed_mesh_min[1]} B{adaptive_bed_mesh_max[1]} T V4

    Klipper:

    ; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally
BED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=1 ADAPTIVE_MARGIN=0

    RRF:

    M557 X{adaptive_bed_mesh_min[0]}:{adaptive_bed_mesh_max[0]} Y{adaptive_bed_mesh_min[1]}:{adaptive_bed_mesh_max[1]} P{bed_mesh_probe_count[0]}:{bed_mesh_probe_count[1]}

  • Allow specifying print order within each layer by @Noisyfox in #3685
    You can now adjust the print order of objects in "by layer" mode by dragging them in the object list. Choosing the "as object list" option from the layer order dropdown will ensure objects are printed in your specified order for each layer.
    image

  • Revist and improve "ensure vertical thickness" strategy and UX by @igiannakas and @SoftFever in #3235 and #4402

    ensure

  • Add a new handy model: Orca string hell by @SoftFever in #3892
    The model itself is pretty much a clone of the top part of the Autodesk FDM test model.
    It's handy to have a dedicated model to benchmark the stringing performance quickly, hence this handy model.
    This also serves as a mini user guide on the One Wall on Top Surfaces feature for models with text embossment on top surfaces.
    stringhell

    stringhell

  • UX: check and warn users if print speed/accel/jerk are higher than the machine limits by @SoftFever in #4403
    motion_limit

  • Improve pressure equalizer so that it's less aggressive by @Noisyfox in #4264
    image

  • [Feature] Introduced option to control amount of internal bridging, fixing internal bridge missing for some sloped surfaces by @igiannakas in #3319
    image

  • Port EditGCodeDialog from PrusaSlicer by @Ocraftyone in #3417
    gcode

  • Port "counterbole hole bridging" feature from SuperSlicer(it's called "No Unsupported Perimeters" in SS) by @Ocraftyone and @Noisyfox in #3189

    counterbole

  • Fixed a bug that in edge cases, wrong top surfaces were detected by @SoftFever in #4244

  • Improvement: Corrected monotonic lines now respect user infill / wall overlap setting by @igiannakas in #3388

  • Add configurable short wall/perimeter cleaning for Arachne by @scottmudge in #2790

  • Fix #3311: filament Load / Unload time was not used in time estimation by @eoyilmaz in #3706

  • Add shell type to STEP importer, to fix importing of some STEP files by @scottmudge in #4247

  • Pressure equalizer documentation by @igiannakas in #4334

  • Improve PA tower: 1. support large nozzles 2. remove jerk=1 settings 3. move settings changes to object to avoid accidently saving the profile by @SoftFever in #4382

  • Support for Obico cloud integration by @kennethjiang in #4116

    For more detailed guild, please check this page: https://obico.io/docs/user-guides/orca-slicer-integration/

  • Allow specify wall directions by @Noisyfox in #4156

  • ENH: Better Scrolling Over Multiline Fields by @Ocraftyone in #4218

  • Improve ExtrusionLine::simplify, eliminating many very-short extrusion segments which led to blemishes in thin-wall models sliced with Arachne - Take 2 by @sethml in #3750

  • Decouple filament minimum print speed from overhang slowdown by @igiannakas in #3859

  • Fix an issue that exporting fil...

Read more

Contributors

bistory, mjonuschat, and 59 other contributors
Assets 7

OrcaSlicer V1.9.1 Official Release

17 Feb 15:22
@SoftFever SoftFever
v1.9.1
8a42aed
Compare
Choose a tag to compare
OrcaSlicer V1.9.1 Official Release

This OrcaSlicer V1.9.1 Official Release

This release primarily addresses a potential security vulnerability and includes several bug fixes.

What's Changed

  • Security Enhancement:
    Orca Slicer has been updated to ensure that sensitive information, like print_host and apikey, is no longer included within the G-code files.
    Previously, OrcaSlicer included OctoPrint/Moonraker connection details in the generated G-code. This posed a potential security risk if the files were shared online and the printer was internet-accessible. This update eliminates the risk of unauthorized access by others exploiting this information.
    It's important to note that this issue only affected users whose printers were directly exposed to the internet. For those using LAN IP(e.g. 192.168.x.x IP address) or local names, the risk was minimal.
    Nonetheless, if your printer is accessible online, we strongly advise updating your APIKEY in OctoPrint/Moonraker or any similar service as an additional safety measure.
    We extend our special thanks to Gina Häußge from OctoPrint for identifying and reporting this security issue.
    NOTE: Project files (.3mf) are not affected by this issue.
    NOTE2: Bambulab printers are not affected.
  • Enforce retraction before wipe (#3888) by @SoftFever
  • Improve PA pattern calibration: Fix retraction/accel/jerk issues #3314 #3851 by @igiannakas
  • Fix painting Gizmo rendering on AMD Vega GPUs (#3663) by @Noisyfox
  • Fix auto orientation and some other rotation-related issues (#3890) by @Noisyfox

Contributors

Noisyfox, igiannakas, and SoftFever
Assets 7

OrcaSlicer V1.9.0 Official Release

05 Jan 14:36
@SoftFever SoftFever
v1.9.0
e713849
Compare
Choose a tag to compare
OrcaSlicer V1.9.0 Official Release

This is the official release of OrcaSlicer V1.9.0.
In this release, we have fixed numerous bugs and added several new features.
V1.9.0 introduces many new features and improvements compared to V1.8.1.

Please check the ALPHA and BETA release notes for the complete list of new features.

IMPORTANT NOTE:

  • Due to major changes in the embossment feature, OrcaSlicer V1.9.0 is unable to edit text embossments in projects created with V1.8.1 or older versions, or with BambuStudio.
    The model with embossment can still be properly loaded and sliced, but the text will no longer be editable. If you need to edit text, please use OrcaSlicer V1.8.1

New features since the V1.9.0 beta release:

  • Orca now supports multiple bed types for all printer by @SoftFever
    You can enable it in printer settings.
    multi_bed
    You can also use the curr_bed_type variable in custom G-code.
    For example, the following sample G-codes can detect the selected bed type and adjust the G-code offset accordingly for Klipper:
{if curr_bed_type=="Textured PEI Plate"}
  SET_GCODE_OFFSET Z=-0.05
{else}
  SET_GCODE_OFFSET Z=0.0
{endif}
  • Improved rendering quality when model color is pure black by @SoftFever
    image

Bug fixes

  • Fixed crashes caused by pressure equalization when support is enabled by @SoftFever
  • Fixed crashes when clicking the color paint gizmo when object part is selected by @Noisyfox
  • Fixed an issue negative part (#3423) by @Noisyfox
  • Fixed a crash bug when switching to Bambu device page when the connection is ready by @SoftFever
  • Fixed intermittent crashes caused by detect_overhang_wall by @SoftFever
  • Fixed an issue that Marlin style object exclusion info was written in gcodes for BBL printers by @SoftFever
  • Fixed an regression that object exclusion image was not working for BBL printers by @SoftFever
  • Fixed an issue that "Per-glyph" option not working when UI is in Chinese by @Noisyfox
  • Fxied a regression that wall order can't be set in height modifier by @SoftFever
  • Fixed a crash bug when send gcode to SD card for BBL printers by @SoftFever
  • Improved stability of text embossment feature for complex models on Mac by @SoftFever

Printer profiles:

  • Updated Neptune 4 serials profiles based on feedbacks by @SoftFever
  • Fixed an issue that some profiles has ironings enabled by default by @SoftFever
  • Profile: Fixes and simplification of some Creality profiles. by @bistory
  • Profile: Anker M5/C first layer consistency improvements by @just-trey
  • Creality K1/K1 Max, Ender 3 V3 Series and Ender 5 S1 baseplates by @bistory
  • Update 0.48mm Standard @bbl X1C 0.8 nozzle.json by @SufficentMuffin
  • QIDI: Add two new filaments by @Hukete
  • Added PAUSE command for change_filament_gcode on Elegoo Neptune 4 series by @bistory
  • Creality Ender 3 V3/KE important fixes and some fine-tunings by @bistory

Translation updates:

Support

If you appreciate my work and would like to support me, consider buying me a coffee.
Your support is greatly appreciated! :)
ko-fi

Contributors

bistory, Noisyfox, and 12 other contributors
Assets 8

OrcaSlicer V1.9.0 Beta Release

30 Dec 14:54
@SoftFever SoftFever
v1.9.0-beta
0857742
Compare
Choose a tag to compare
OrcaSlicer V1.9.0 Beta Release Pre-release
Pre-release

This is OrcaSlicer V1.9.0 beta release.
This update introduces new features and resolves several bugs identified in the previous Alpha version.

Known issues:

  1. Bambu Printer Users: OrcaSlicer may crash if you switch to the device page before the printer connection is established. The fix is ready and will be included in the next release. As a workaround, please wait for 10-30 seconds after launching OrcaSlicer before switching to the device page.

What's Changed

  • MacOS X86_64 crashing issue on is now fixed by @SoftFever
  • MacOS Catalina Support: Orca Slicer is now compatible with MacOS Catalina (10.15). by @kpishere and @SoftFever in #3252
  • Seam improvement: "wipe inside before extruding an external perimeter"
    This feature is originally implemented in SuperSlicer by @supermerill and ported into OrcaSlicer by @igiannakas in #3287
    By moving the deretraction position of outer walls to the inside of the model, this feature can improve the seams of the model when sandwich or outer-inner print order is used.
    image
    image
    image provided by community member @pemerick07
  • QoL: removed P1P<->P1S profile mismatching warning by @SoftFever
  • Enhanced update notification system: Orca now allows users to opt for 'stable updates only' in the preferences section by @SoftFever

Fixed bugs:

  • Fixed a regression issue that --datadir was broken in V1.9.0-alpha by @SoftFever
  • Fixed an issue where exclude_object code freezes printers running on old versions of Marlin/RRF firmwares which don't have this feature enabled as it was enabled by default in OrcaSlicer. This feature is now disabled by default. Klipper firmware won't freeze even if this feature is not enabled, so I have adjusted most Klipper-based profiles to enable it. Please check your profile just to make sure if it's on/off based on your actual situation/need.
  • Fixed an issue that the legend window expands to all available horizontal space if scrollbar is displayed by @Noisyfox
  • Fixed a bug that spiral_mode_max_xy_smoothing was not hiden when vase is not enabled by @SoftFever
  • Fixed a regression that Turkish lang option was missing in V1.9.0-alpha by @SoftFever
  • Fixed an issue that layer height can be set to zero by @SoftFever
  • Fixed an that exclude_object option was hidden for Marlin/RRF firmwares by @SoftFever
  • Fixed typo by @bistory in #3331
  • Update README.md by @eltociear in #3281

Printer profiles:

  • QIDI: Add two new filaments by @Hukete in #3304
  • Profile: Fixes and simplification of some Creality profiles. by @bistory in #3315
  • Profile: Anker M5/C first layer consistency improvements by @just-trey in #3321
  • General printer profiles adjustments by @SoftFever

Translation updates:

Contributors

bistory, pemerick07, and 12 other contributors
Assets 8

OrcaSlicer V1.9.0 Alpha Release

24 Dec 08:20
@SoftFever SoftFever
v1.9.0-alpha
665526e
Compare
Choose a tag to compare
OrcaSlicer V1.9.0 Alpha Release Pre-release
Pre-release

This is OrcaSlicer V1.9.0-alpha Release.

What's Changed

  • New smooth spiral vase mode by @andrewboktor in #3091
    It's no secret that OrcaSlicer, as well as other Slic3r forks, has struggled with spiral vase mode, especially with models featuring sloped surfaces and large line widths. This new PR, introduced by @andrewboktor, presents an improved smooth spiral vase mode inspired by Ultimaker Cura. It effectively eliminates visible seams in spiral vases.
    image
    image

  • Port PrusaSlicer's Measure & Cut gizmos by @Noisyfox in #2603
    Originally developed by the PrusaSlicer team and beloved by many users, the Measure & Cut gizmos have now been ported to OrcaSlicer, thanks to @Noisyfox.
    image

  • Port Emboss & SVG gizmo from PrusaSlicer by @Noisyfox in #2819
    image

  • Add option to "Reverse only internal perimeters" under the reverse on odd feature to reduce part warping by @igiannakas in #2722
    This "Reverse only internal perimeters" option is an extension to reverse on odd reversal is not executed on external perimeters.
    The primary use case for this PR is to greatly reduce part stresses as they are now distributed in alternating directions, which should reduce warping, while maintaining external wall quality. This can be very useful for warp prone material, like ABS/ASA and also for elastic filaments like TPU and Silk PLA.
    image
    image

  • Show used filament length and weight per line type by @Noisyfox in #3246
    image

  • Add "Cancel Objects" support for Prusa/Marlin/RRF firmware by @SoftFever in #3164
    Watch the video

  • Alternate extra wall by @igiannakas in #3196
    This setting adds an extra wall every other layer. This way the infill gets caught between the walls, resulting in:

  • Theoretically, stronger prints due to better infill anchoring.
  • Allows for the infill/wall overlap to be set to low values without compromising object strength while maintaining external surface quality.
  • It may contribute to improving water tightness of models as the gaps between the top and bottom layers and the walls are overlapping.
    image

Printer profiles:

  • the layer height should be 0.24 not 0.2 by @pellcorp in #2779
  • Adding new nozzle profiles for the Creality Ender-5 Pro (2019) by @pwschattenberg in #2817
  • Update Snapmaker profiles - includes disruptive changes by @macdylan in #2939
  • Initial add of Neptune 4 Plus profile by @Kalooth in htt...
Read more

Contributors

bistory, pellcorp, and 26 other contributors
Assets 8

OrcaSlicer V1.8.1 Official Release

03 Dec 11:26
@SoftFever SoftFever
v1.8.1
be1bd08
This commit was created on GitHub.com and signed with GitHub’s verified signature. The key has expired.
GPG key ID: 4AEE18F83AFDEB23
Expired
Learn about vigilant mode.
Compare
Choose a tag to compare
OrcaSlicer V1.8.1 Official Release

UPDATE:

Apple users: the build is not signed and notarized properly due to a CICD issue.
New notarized build will be reuploaded soon.
New builds have been uploaded

This is the official release of OrcaSlicer V1.8.1.
In this version, we've fixed a few bugs from 1.8.0 to enhance stability. Additionally, we've added a few minor features.

What's Changed

  • Introduced thick internal bridges option by @SoftFever in #2954
    Previously, OrcaSlicer would always use thick internal bridges. In this mode, Orca assumes the layer height is equal to the nozzle diameter, which may cause problems when using a large nozzle.
    Internal thick bridge off:
    Screenshot 2023-12-02 at 1 18 13 AM
    Internal thick bridge on:
    Screenshot 2023-12-02 at 1 17 41 AM
  • Internal Bridge Flow rate parameter introduction by @igiannakas
    image
  • Fix precise wall for Arachne wall generator by @SoftFever in #2966
    For detailed information about the precise wall feature, please refer to the WIKI
    image
  • Improve arc fitting (#2942) by @SoftFever
  • Fixed an issue that purge amount was incorrect when prime tower was not enabled for BBL printers (#2912) by @igiannakas
  • Fixed issue that application crashes occasionally when closing application (#2904) by @igiannakas
  • Fixed an issue that bed texture was black on AMD GPUs by @Noisyfox #2780
  • Fixed an issue that PA calibration Line method was not properly located when bed origin is not at (0,0) by @SoftFever

Printer profiles:

Translation updates:

Support

If you appreciate my work and would like to support me, consider buying me a coffee.
Your support is greatly appreciated! :)
ko-fi

Contributors

Noisyfox, AndylgTom, and 3 other contributors
Assets 8

OrcaSlicer V1.8.0 Official Release

17 Nov 13:06
@SoftFever SoftFever
v1.8.0
f5ec607
Compare
Choose a tag to compare
OrcaSlicer V1.8.0 Official Release

This is the official release of OrcaSlicer V1.8.0
It addresses some bugs identified in V1.8.0-RC2

Please refer to previous Beta and Release Candidate releases for a complete list of changes introduced in the V1.8.0 release.

OrcaSlicer V1.8.0 Beta Release
OrcaSlicer V1.8.0 Beta 2
OrcaSlicer V1.8.0 Release Candidate
OrcaSlicer V1.8.0 Release Candidate 2

What's Changed

  • Updated the Wiki to explain OrcaSlicer's support for exhaust fan/Auxiliary fan/Chamber temperature , including corresponding Klipper macros for reference..
  • Fix scaling of min_width_top_surface when using abs value by @Noisyfox in #2725
  • Improve Windows crash log by @Noisyfox in #2736
  • Fix for QOI thumbnails not working by @Exerqtor in #2755
  • Fix layer height modifier layout (#2708) by @Noisyfox in #2756
  • [Multi Material] Fix first layers of prime tower when using "no sparse layers" by @SVNMLR in #2764
  • Support initial_tool variable for filename format
  • Limit max wipe tower speed(infill and bridge) to 90 mm/s
  • Fix wipe tower regression bug: filament end inserted twice

Printer profiles:

  • Update fdm_process_qidi_x3_common.json 11/13 by @Hukete in #2717
  • Flyingbear official patch 9 by @FlyingbearOfficial in #2746
  • Update Flashforge profiles by @mariuske in #2718
  • Fix creality k1/max default materials (#2609) by @Noisyfox in #2767
  • Fixed some issues for Prusa MK3S/MINI profiles
  • fix snapmaker J1 not displaying bug #2750
  • Diable activate_air_filtration by default for ABS/ASA for BambuLabs printers

Translation updates:

Support

If you appreciate my work and would like to support me, consider buying me a coffee.
Your support is greatly appreciated! :)
ko-fi

Contributors

Noisyfox, FabioForcina, and 8 other contributors
Assets 8