Skip to content

STFleming/EmSys

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 

History

77 Commits
 
 
 
 

Repository files navigation

Welcome to EmSys Autumn 2021 CSC368/M68

Welcome to the Swansea University EmSys (Embedded Systems) module. This repository contains various useful bits and pieces for the course, such as a schedule, datasheets, and various other things. For this course, I will primarily use GitHub to host lecture and lab content. Below is a table detailing the lecture and labs' timing, along with links to the relevant GitHub page. Most of the repositories are currently private but will be made public before the appropriate lab/lecture.

Lab and Coursework Breakdown

Lab description Assessment type Overall weighting Pairs/Individual
Lab 1 Secret Word Signoff 2% Lab pairs
Lab 2 Arduino introduction and dotDevice Signoff 3% Lab pairs
Lab 3 GPIO deep dive Signoff 5% Lab pairs
Lab 4 Verilog Lab: designing an ALU Signoff 5% Lab pairs
Lab 5 ESP32 Hardware Timers and Verilog Timers Signoff 5% Lab pairs
CW 1 Low-power IoT sensor Individual report 30% Lab pairs
  • All the lab work is completed in pairs. Pairing will be determined at the start of term.
  • A "Signoff" assessment type means that I will look over your GitHub repository and check that the task has been completed and then update the marks.
  • An "Individual report" assessment type means that each student will need to submit an individual report for marking, where feedback is returned within 2 weeks. These larger assignments will be submitted via canvas.

Lab/CW Schedule

Lab/CW Release date Due Date
Lab 1 05/10/2021 25/10/2021 @ 11am
Lab 2 11/10/2021 25/10/2021 @ 11am
Lab 3 18/10/2021 25/10/2021 @ 11am
Lab 4 26/10/2021 22/11/2021 @ 11am
Lab 5 05/11/2021 22/11/2021 @ 11am
CW 1 08/11/2021 08/12/2021 @ 11am

Exams

There a 50% exam component for this module.

A practice exam can be found [here] along with videos explaining the answers to the questions.

Some components in the module this term have changed slightly, closer to the exam I will add additional practice questions for the additional content on the module.

Useful links

  • Setting up your EmSys lab environment [here]
  • Using your github logbook [video]

Lecture Schedule and Course Content (subject to change)

Week dates Lecture
1 30/09 [Introduction to the course]
2 7/10 [HW/SW]
3 14/10 [GPIO and the cost of the Arduino abstractions]
4 21/10 [Hardware Description Languages]
5 28/10 [Synchronous Sequential Logic]
6 - -
7 11/11 [Power Optimisations]
8 18/11 [Time in Embedded Systems]
9 26/11 [Analogue to Digital Conversion]
10 2/12 [Digital to Analogue Conversion]

Lecture Recordings

Week dates Recording
1 30/09 [video]
2 07/10 [video]
3 14/10 [video]
4 21/10 [video]
5 28/10 [video]
6 9/11 [video]
7 11/11 [video]
8 18/11 [video]
9 26/11 [video]
10 02/12 [video]

Datasheets & Technical Reference Manuals

Device Datasheet/Technical Reference Manual
TinyPico-01
ESP32 Technical Reference Manual
Logic Analyser
Low Power Current Amplifier

TinyPico Pinout


Software & Libraries

Software Information / Resources
Basic Info
PulseView Logic Analyser gui
CircuitJs Web simulator
ArduinoWebsockets

About

No description, website, or topics provided.

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published