Skip to content
This repository has been archived by the owner on Oct 20, 2022. It is now read-only.

Latest commit

 

History

History
583 lines (440 loc) · 19.3 KB

INSTALL.DPDK.md

File metadata and controls

583 lines (440 loc) · 19.3 KB

OVS DPDK INSTALL GUIDE

Contents

  1. Overview
  2. Building and Installation
  3. Setup OVS DPDK datapath
  4. DPDK in the VM
  5. OVS Testcases
  6. Limitations

1. Overview

Open vSwitch can use DPDK lib to operate entirely in userspace. This file provides information on installation and use of Open vSwitch using DPDK datapath. This version of Open vSwitch should be built manually with configure and make.

The DPDK support of Open vSwitch is considered 'experimental'.

Prerequisites

2. Building and Installation

2.1 Configure & build the Linux kernel

On Linux Distros running kernel version >= 3.0, kernel rebuild is not required and only grub cmdline needs to be updated for enabling IOMMU [VFIO support - 3.2]. For older kernels, check if kernel is built with UIO, HUGETLBFS, PROC_PAGE_MONITOR, HPET, HPET_MMAP support.

Detailed system requirements can be found at DPDK requirements and also refer to advanced install guide INSTALL.DPDK-ADVANCED.md

2.2 Install DPDK

  1. Download DPDK and extract the file, for example in to /usr/src and set DPDK_DIR

    cd /usr/src/
    wget http://dpdk.org/browse/dpdk/snapshot/dpdk-16.04.zip
    unzip dpdk-16.04.zip
    
    export DPDK_DIR=/usr/src/dpdk-16.04
    cd $DPDK_DIR
    
  2. Configure and Install DPDK

    Build and install the DPDK library.

    export DPDK_TARGET=x86_64-native-linuxapp-gcc
    export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET
    make install T=$DPDK_TARGET DESTDIR=install
    

    Note: For IVSHMEM, Set export DPDK_TARGET=x86_64-ivshmem-linuxapp-gcc

2.3 Install OVS

OVS can be installed using different methods. For OVS to use DPDK datapath, it has to be configured with DPDK support and is done by './configure --with-dpdk'. This section focus on generic recipe that suits most cases and for distribution specific instructions, refer INSTALL.Fedora.md, INSTALL.RHEL.md and INSTALL.Debian.md.

The OVS sources can be downloaded in different ways and skip this section if already having the correct sources. Otherwise download the correct version using one of the below suggested methods and follow the documentation of that specific version.

  • OVS stable releases can be downloaded in compressed format from Download OVS

    cd /usr/src
    wget http://openvswitch.org/releases/openvswitch-<version>.tar.gz
    tar -zxvf openvswitch-<version>.tar.gz
    export OVS_DIR=/usr/src/openvswitch-<version>
    
  • OVS current development can be clone using 'git' tool

    cd /usr/src/
    git clone https://github.com/openvswitch/ovs.git
    export OVS_DIR=/usr/src/ovs
    
  • Install OVS dependencies

    GNU make, GCC 4.x (or) Clang 3.4, libnuma (Mandatory) libssl, libcap-ng, Python 2.7 (Optional) More information can be found at Build Requirements

  • Configure, Install OVS

    cd $OVS_DIR
    ./boot.sh
    ./configure --with-dpdk=$DPDK_BUILD
    make install
    

    Note: Passing DPDK_BUILD can be skipped if DPDK library is installed in standard locations i.e ./configure --with-dpdk should suffice.

Additional information can be found in INSTALL.md.

3. Setup OVS with DPDK datapath

3.1 Setup Hugepages

Allocate and mount 2M Huge pages:

  • For persistent allocation of huge pages, write to hugepages.conf file in /etc/sysctl.d

    echo 'vm.nr_hugepages=2048' > /etc/sysctl.d/hugepages.conf

  • For run-time allocation of huge pages

    sysctl -w vm.nr_hugepages=N where N = No. of 2M huge pages allocated

  • To verify hugepage configuration

    grep HugePages_ /proc/meminfo

  • Mount hugepages

    mount -t hugetlbfs none /dev/hugepages

    Note: Mount hugepages if not already mounted by default.

3.2 Setup DPDK devices using VFIO

  • Supported with kernel version >= 3.6

  • VFIO needs support from BIOS and kernel.

  • BIOS changes:

    Enable VT-d, can be verified from dmesg | grep -e DMAR -e IOMMU output

  • GRUB bootline:

    Add iommu=pt intel_iommu=on, can be verified from cat /proc/cmdline output

  • Load modules and bind the NIC to VFIO driver

    modprobe vfio-pci
    sudo /usr/bin/chmod a+x /dev/vfio
    sudo /usr/bin/chmod 0666 /dev/vfio/*
    $DPDK_DIR/tools/dpdk_nic_bind.py --bind=vfio-pci eth1
    $DPDK_DIR/tools/dpdk_nic_bind.py --status
    

Note: If running kernels < 3.6 UIO drivers to be used, please check DPDK in the VM, DPDK devices using UIO section for the steps.

3.3 Setup OVS

  1. DB creation (One time step)

    mkdir -p /usr/local/etc/openvswitch
    mkdir -p /usr/local/var/run/openvswitch
    rm /usr/local/etc/openvswitch/conf.db
    ovsdb-tool create /usr/local/etc/openvswitch/conf.db  \
           /usr/local/share/openvswitch/vswitch.ovsschema
    
  2. Start ovsdb-server

    No SSL support

    ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \
        --remote=db:Open_vSwitch,Open_vSwitch,manager_options \
        --pidfile --detach
    

    SSL support

    ovsdb-server --remote=punix:/usr/local/var/run/openvswitch/db.sock \
        --remote=db:Open_vSwitch,Open_vSwitch,manager_options \
        --private-key=db:Open_vSwitch,SSL,private_key \
        --certificate=Open_vSwitch,SSL,certificate \
        --bootstrap-ca-cert=db:Open_vSwitch,SSL,ca_cert --pidfile --detach
    
  3. Initialize DB (One time step)

    ovs-vsctl --no-wait init
    
  4. Start vswitchd

    DPDK configuration arguments can be passed to vswitchd via Open_vSwitch 'other_config' column. The important configuration options are listed below. Defaults will be provided for all values not explicitly set. Refer ovs-vswitchd.conf.db(5) for additional information on configuration options.

    • dpdk-init Specifies whether OVS should initialize and support DPDK ports. This is a boolean, and defaults to false.

    • dpdk-lcore-mask Specifies the CPU cores on which dpdk lcore threads should be spawned and expects hex string (eg '0x123').

    • dpdk-socket-mem Comma separated list of memory to pre-allocate from hugepages on specific sockets.

    • dpdk-hugepage-dir Directory where hugetlbfs is mounted

    • vhost-sock-dir Option to set the path to the vhost_user unix socket files.

    NOTE: Changing any of these options requires restarting the ovs-vswitchd application.

    Open vSwitch can be started as normal. DPDK will be initialized as long as the dpdk-init option has been set to 'true'.

    export DB_SOCK=/usr/local/var/run/openvswitch/db.sock
    ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-init=true
    ovs-vswitchd unix:$DB_SOCK --pidfile --detach
    

    If allocated more than one GB hugepage (as for IVSHMEM), set amount and use NUMA node 0 memory. For details on using ivshmem with DPDK, refer to OVS Testcases.

    ovs-vsctl --no-wait set Open_vSwitch . other_config:dpdk-socket-mem="1024,0"
    ovs-vswitchd unix:$DB_SOCK --pidfile --detach
    

    To better scale the work loads across cores, Multiple pmd threads can be created and pinned to CPU cores by explicity specifying pmd-cpu-mask. eg: To spawn 2 pmd threads and pin them to cores 1, 2

    ovs-vsctl set Open_vSwitch . other_config:pmd-cpu-mask=6
    
  5. Create bridge & add DPDK devices

    create a bridge with datapath_type "netdev" in the configuration database

    ovs-vsctl add-br br0 -- set bridge br0 datapath_type=netdev

    Now you can add DPDK devices. OVS expects DPDK device names to start with "dpdk" and end with a portid. vswitchd should print (in the log file) the number of dpdk devices found.

    ovs-vsctl add-port br0 dpdk0 -- set Interface dpdk0 type=dpdk
    ovs-vsctl add-port br0 dpdk1 -- set Interface dpdk1 type=dpdk
    

    After the DPDK ports get added to switch, a polling thread continuously polls DPDK devices and consumes 100% of the core as can be checked from 'top' and 'ps' cmds.

    top -H
    ps -eLo pid,psr,comm | grep pmd
    

    Note: creating bonds of DPDK interfaces is slightly different to creating bonds of system interfaces. For DPDK, the interface type must be explicitly set, for example:

    ovs-vsctl add-bond br0 dpdkbond dpdk0 dpdk1 -- set Interface dpdk0 type=dpdk -- set Interface dpdk1 type=dpdk
    
  6. PMD thread statistics

    # Check current stats
      ovs-appctl dpif-netdev/pmd-stats-show
    
    # Show port/rxq assignment
      ovs-appctl dpif-netdev/pmd-rxq-show
    
    # Clear previous stats
      ovs-appctl dpif-netdev/pmd-stats-clear
    
  7. Stop vswitchd & Delete bridge

    ovs-appctl -t ovs-vswitchd exit
    ovs-appctl -t ovsdb-server exit
    ovs-vsctl del-br br0
    

4. DPDK in the VM

DPDK 'testpmd' application can be run in the Guest VM for high speed packet forwarding between vhostuser ports. DPDK and testpmd application has to be compiled on the guest VM. Below are the steps for setting up the testpmd application in the VM. More information on the vhostuser ports can be found in Vhost Walkthrough.

  • Instantiate the Guest
Qemu version >= 2.2.0

export VM_NAME=Centos-vm
export GUEST_MEM=3072M
export QCOW2_IMAGE=/root/CentOS7_x86_64.qcow2
export VHOST_SOCK_DIR=/usr/local/var/run/openvswitch

qemu-system-x86_64 -name $VM_NAME -cpu host -enable-kvm -m $GUEST_MEM -object memory-backend-file,id=mem,size=$GUEST_MEM,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc -smp sockets=1,cores=2 -drive file=$QCOW2_IMAGE -chardev socket,id=char0,path=$VHOST_SOCK_DIR/dpdkvhostuser0 -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1,mrg_rxbuf=off -chardev socket,id=char1,path=$VHOST_SOCK_DIR/dpdkvhostuser1 -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:02,netdev=mynet2,mrg_rxbuf=off --nographic -snapshot
  • Download the DPDK Srcs to VM and build DPDK
cd /root/dpdk/
wget http://dpdk.org/browse/dpdk/snapshot/dpdk-16.04.zip
unzip dpdk-16.04.zip
export DPDK_DIR=/root/dpdk/dpdk-16.04
export DPDK_TARGET=x86_64-native-linuxapp-gcc
export DPDK_BUILD=$DPDK_DIR/$DPDK_TARGET
cd $DPDK_DIR
make install T=$DPDK_TARGET DESTDIR=install
  • Build the test-pmd application
cd app/test-pmd
export RTE_SDK=$DPDK_DIR
export RTE_TARGET=$DPDK_TARGET
make
  • Setup Huge pages and DPDK devices using UIO
sysctl vm.nr_hugepages=1024
mkdir -p /dev/hugepages
mount -t hugetlbfs hugetlbfs /dev/hugepages (only if not already mounted)
modprobe uio
insmod $DPDK_BUILD/kmod/igb_uio.ko
$DPDK_DIR/tools/dpdk_nic_bind.py --status
$DPDK_DIR/tools/dpdk_nic_bind.py -b igb_uio 00:03.0 00:04.0

vhost ports pci ids can be retrieved using lspci | grep Ethernet cmd.

5. OVS Testcases

Below are few testcases and the list of steps to be followed.

5.1 PHY-PHY

The steps (1-5) in 3.3 section will create & initialize DB, start vswitchd and also add DPDK devices to bridge 'br0'.

  1. Add Test flows to forward packets betwen DPDK port 0 and port 1

    # Clear current flows
    ovs-ofctl del-flows br0
    
    # Add flows between port 1 (dpdk0) to port 2 (dpdk1)
    ovs-ofctl add-flow br0 in_port=1,action=output:2
    ovs-ofctl add-flow br0 in_port=2,action=output:1
    

5.2 PHY-VM-PHY [VHOST LOOPBACK]

The steps (1-5) in 3.3 section will create & initialize DB, start vswitchd and also add DPDK devices to bridge 'br0'.

  1. Add dpdkvhostuser ports to bridge 'br0'. More information on the dpdkvhostuser ports can be found in Vhost Walkthrough.

    ovs-vsctl add-port br0 dpdkvhostuser0 -- set Interface dpdkvhostuser0 type=dpdkvhostuser
    ovs-vsctl add-port br0 dpdkvhostuser1 -- set Interface dpdkvhostuser1 type=dpdkvhostuser
    
  2. Add Test flows to forward packets betwen DPDK devices and VM ports

    # Clear current flows
    ovs-ofctl del-flows br0
    
    # Add flows
    ovs-ofctl add-flow br0 in_port=1,action=output:3
    ovs-ofctl add-flow br0 in_port=3,action=output:1
    ovs-ofctl add-flow br0 in_port=4,action=output:2
    ovs-ofctl add-flow br0 in_port=2,action=output:4
    
    # Dump flows
    ovs-ofctl dump-flows br0
    
  3. Instantiate Guest VM using Qemu cmdline

    Guest Configuration

    | configuration        | values | comments
    |----------------------|--------|-----------------
    | qemu version         | 2.2.0  |
    | qemu thread affinity | core 5 | taskset 0x20
    | memory               | 4GB    | -
    | cores                | 2      | -
    | Qcow2 image          | CentOS7| -
    | mrg_rxbuf            | off    | -
    

    Instantiate Guest

    export VM_NAME=vhost-vm
    export GUEST_MEM=3072M
    export QCOW2_IMAGE=/root/CentOS7_x86_64.qcow2
    export VHOST_SOCK_DIR=/usr/local/var/run/openvswitch
    
    taskset 0x20 qemu-system-x86_64 -name $VM_NAME -cpu host -enable-kvm -m $GUEST_MEM -object memory-backend-file,id=mem,size=$GUEST_MEM,mem-path=/dev/hugepages,share=on -numa node,memdev=mem -mem-prealloc -smp sockets=1,cores=2 -drive file=$QCOW2_IMAGE -chardev socket,id=char0,path=$VHOST_SOCK_DIR/dpdkvhostuser0 -netdev type=vhost-user,id=mynet1,chardev=char0,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:01,netdev=mynet1,mrg_rxbuf=off -chardev socket,id=char1,path=$VHOST_SOCK_DIR/dpdkvhostuser1 -netdev type=vhost-user,id=mynet2,chardev=char1,vhostforce -device virtio-net-pci,mac=00:00:00:00:00:02,netdev=mynet2,mrg_rxbuf=off --nographic -snapshot
    
  4. Guest VM using libvirt

    The below is a simple xml configuration of 'demovm' guest that can be instantiated using 'virsh'. The guest uses a pair of vhostuser port and boots with 4GB RAM and 2 cores. More information can be found in Vhost Walkthrough.

    <domain type='kvm'>
      <name>demovm</name>
      <uuid>4a9b3f53-fa2a-47f3-a757-dd87720d9d1d</uuid>
      <memory unit='KiB'>4194304</memory>
      <currentMemory unit='KiB'>4194304</currentMemory>
      <memoryBacking>
        <hugepages>
          <page size='2' unit='M' nodeset='0'/>
        </hugepages>
      </memoryBacking>
      <vcpu placement='static'>2</vcpu>
      <cputune>
        <shares>4096</shares>
        <vcpupin vcpu='0' cpuset='4'/>
        <vcpupin vcpu='1' cpuset='5'/>
        <emulatorpin cpuset='4,5'/>
      </cputune>
      <os>
        <type arch='x86_64' machine='pc'>hvm</type>
        <boot dev='hd'/>
      </os>
      <features>
        <acpi/>
        <apic/>
      </features>
      <cpu mode='host-model'>
        <model fallback='allow'/>
        <topology sockets='2' cores='1' threads='1'/>
        <numa>
          <cell id='0' cpus='0-1' memory='4194304' unit='KiB' memAccess='shared'/>
        </numa>
      </cpu>
      <on_poweroff>destroy</on_poweroff>
      <on_reboot>restart</on_reboot>
      <on_crash>destroy</on_crash>
      <devices>
        <emulator>/usr/bin/qemu-kvm</emulator>
        <disk type='file' device='disk'>
          <driver name='qemu' type='qcow2' cache='none'/>
          <source file='/root/CentOS7_x86_64.qcow2'/>
          <target dev='vda' bus='virtio'/>
        </disk>
        <disk type='dir' device='disk'>
          <driver name='qemu' type='fat'/>
          <source dir='/usr/src/dpdk-16.04'/>
          <target dev='vdb' bus='virtio'/>
          <readonly/>
        </disk>
        <interface type='vhostuser'>
          <mac address='00:00:00:00:00:01'/>
          <source type='unix' path='/usr/local/var/run/openvswitch/dpdkvhostuser0' mode='client'/>
           <model type='virtio'/>
          <driver queues='2'>
            <host mrg_rxbuf='off'/>
          </driver>
        </interface>
        <interface type='vhostuser'>
          <mac address='00:00:00:00:00:02'/>
          <source type='unix' path='/usr/local/var/run/openvswitch/dpdkvhostuser1' mode='client'/>
          <model type='virtio'/>
          <driver queues='2'>
            <host mrg_rxbuf='off'/>
          </driver>
        </interface>
        <serial type='pty'>
          <target port='0'/>
        </serial>
        <console type='pty'>
          <target type='serial' port='0'/>
        </console>
      </devices>
    </domain>
    
  5. DPDK Packet forwarding in Guest VM

    To accomplish this, DPDK and testpmd application have to be first compiled on the VM and the steps are listed in DPDK in the VM.

    • Run test-pmd application
    cd $DPDK_DIR/app/test-pmd;
    ./testpmd -c 0x3 -n 4 --socket-mem 1024 -- --burst=64 -i --txqflags=0xf00 --disable-hw-vlan
    set fwd mac_retry
    start
    
    • Bind vNIC back to kernel once the test is completed.
    $DPDK_DIR/tools/dpdk_nic_bind.py --bind=virtio-pci 0000:00:03.0
    $DPDK_DIR/tools/dpdk_nic_bind.py --bind=virtio-pci 0000:00:04.0
    

    Note: Appropriate PCI IDs to be passed in above example. The PCI IDs can be retrieved using '$DPDK_DIR/tools/dpdk_nic_bind.py --status' cmd.

5.3 PHY-VM-PHY [IVSHMEM]

The steps for setup of IVSHMEM are covered in section 5.2(PVP - IVSHMEM) of OVS Testcases in ADVANCED install guide.

6. Limitations

  • Supports MTU size 1500, MTU setting for DPDK netdevs will be in future OVS release.

  • Currently DPDK ports does not use HW offload functionality.

  • Network Interface Firmware requirements: Each release of DPDK is validated against a specific firmware version for a supported Network Interface. New firmware versions introduce bug fixes, performance improvements and new functionality that DPDK leverages. The validated firmware versions are available as part of the release notes for DPDK. It is recommended that users update Network Interface firmware to match what has been validated for the DPDK release.

    For DPDK 16.04, the list of validated firmware versions can be found at:

    http://dpdk.org/doc/guides/rel_notes/release_16_04.html

Bug Reporting:

Please report problems to bugs@openvswitch.org.