Skip to content

OpenClovis/python-ecdsa

 
 

Repository files navigation

Pure-Python ECDSA

build status Coverage Status Latest Version

This is an easy-to-use implementation of ECDSA cryptography (Elliptic Curve Digital Signature Algorithm), implemented purely in Python, released under the MIT license. With this library, you can quickly create keypairs (signing key and verifying key), sign messages, and verify the signatures. The keys and signatures are very short, making them easy to handle and incorporate into other protocols.

Features

This library provides key generation, signing, and verifying, for five popular NIST "Suite B" GF(p) curves, with key lengths of 192, 224, 256, 384, and 521 bits. The "short names" for these curves, as known by the OpenSSL tool (openssl ecparam --list_curves), are: prime192v1, secp224r1, prime256v1, secp384r1, and secp521r1. It also includes the 256-bit curve used by Bitcoin, whose short name is secp256k1. No other curves are included, but it would not be too hard to add more.

Dependencies

This library uses only Python. It requires python2.6 or later versions of the python2.x series. It is also compatible with python3.2 and 3.3.

To run the OpenSSL compatibility tests, the 'openssl' tool must be on your $PATH. This release has been tested successfully against both OpenSSL 0.9.8o and 1.0.0a .

Speed

The following table shows how long this library takes to generate keypairs (keygen=), to sign data (sign=), and to verify those signatures (verify=), on my 2008 Mac laptop. All times are in seconds. It also shows the length of a signature (in bytes): the verifying ("public") key is typically the same length as the signature, and the signing ("private") key is half that length. Use "python setup.py speed" to generate this table on your own computer.

  • NIST192p: siglen= 48, keygen=0.160s, sign=0.058s, verify=0.116s
  • NIST224p: siglen= 56, keygen=0.230s, sign=0.086s, verify=0.165s
  • NIST256p: siglen= 64, keygen=0.305s, sign=0.112s, verify=0.220s
  • NIST384p: siglen= 96, keygen=0.801s, sign=0.289s, verify=0.558s
  • NIST521p: siglen=132, keygen=1.582s, sign=0.584s, verify=1.152s

For comparison, a quality C++ implementation of ECDSA (Crypto++) typically computes a NIST256p signature in 2.88ms and a verification in 8.53ms, about 30-40x faster.

Keys and signature can be serialized in different ways (see Usage, below). For a NIST192p key, the three basic representations require strings of the following lengths (in bytes):

to_string:  signkey= 24, verifykey= 48, signature=48
DER:        signkey=106, verifykey= 80, signature=55
PEM:        signkey=278, verifykey=162, (no support for PEM signatures)

History

In 2006, Peter Pearson announced his pure-python implementation of ECDSA in a message to sci.crypt, available from his download site. In 2010, Brian Warner wrote a wrapper around this code, to make it a bit easier and safer to use. You are looking at the README for this wrapper.

Testing

There are four test suites, three for the original Pearson module, and one more for the wrapper. To run them all, do this:

python setup.py test

On my 2014 Mac Mini, the combined tests take about 20 seconds to run. On a 2.4GHz P4 Linux box, they take 81 seconds.

One component of test_pyecdsa.py checks compatibility with OpenSSL, by running the "openssl" CLI tool. If this tool is not on your $PATH, you may want to comment out this test (the easiest way is to add a line that says "del OpenSSL" to the end of test_pyecdsa.py).

Security

This library does not protect against timing attacks. Do not allow attackers to measure how long it takes you to generate a keypair or sign a message. This library depends upon a strong source of random numbers. Do not use it on a system where os.urandom() is weak.

Usage

You start by creating a SigningKey. You can use this to sign data, by passing in a data string and getting back the signature (also a string). You can also ask a SigningKey to give you the corresponding VerifyingKey. The VerifyingKey can be used to verify a signature, by passing it both the data string and the signature string: it either returns True or raises BadSignatureError.

from ecdsa import SigningKey
sk = SigningKey.generate() # uses NIST192p
vk = sk.get_verifying_key()
signature = sk.sign("message")
assert vk.verify(signature, "message")

Each SigningKey/VerifyingKey is associated with a specific curve, like NIST192p (the default one). Longer curves are more secure, but take longer to use, and result in longer keys and signatures.

from ecdsa import SigningKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
vk = sk.get_verifying_key()
signature = sk.sign("message")
assert vk.verify(signature, "message")

The SigningKey can be serialized into several different formats: the shortest is to call s=sk.to_string(), and then re-create it with SigningKey.from_string(s, curve) . This short form does not record the curve, so you must be sure to tell from_string() the same curve you used for the original key. The short form of a NIST192p-based signing key is just 24 bytes long.

from ecdsa import SigningKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
sk_string = sk.to_string()
sk2 = SigningKey.from_string(sk_string, curve=NIST384p)
# sk and sk2 are the same key

sk.to_pem() and sk.to_der() will serialize the signing key into the same formats that OpenSSL uses. The PEM file looks like the familiar ASCII-armored "-----BEGIN EC PRIVATE KEY-----" base64-encoded format, and the DER format is a shorter binary form of the same data. SigningKey.from_pem()/.from_der() will undo this serialization. These formats include the curve name, so you do not need to pass in a curve identifier to the deserializer.

from ecdsa import SigningKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
sk_pem = sk.to_pem()
sk2 = SigningKey.from_pem(sk_pem)
# sk and sk2 are the same key

Likewise, the VerifyingKey can be serialized in the same way: vk.to_string()/VerifyingKey.from_string(), to_pem()/from_pem(), and to_der()/from_der(). The same curve= argument is needed for VerifyingKey.from_string().

from ecdsa import SigningKey, VerifyingKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
vk = sk.get_verifying_key()
vk_string = vk.to_string()
vk2 = VerifyingKey.from_string(vk_string, curve=NIST384p)
# vk and vk2 are the same key

from ecdsa import SigningKey, VerifyingKey, NIST384p
sk = SigningKey.generate(curve=NIST384p)
vk = sk.get_verifying_key()
vk_pem = vk.to_pem()
vk2 = VerifyingKey.from_pem(vk_pem)
# vk and vk2 are the same key

There are a couple of different ways to compute a signature. Fundamentally, ECDSA takes a number that represents the data being signed, and returns a pair of numbers that represent the signature. The hashfunc= argument to sk.sign() and vk.verify() is used to turn an arbitrary string into fixed-length digest, which is then turned into a number that ECDSA can sign, and both sign and verify must use the same approach. The default value is hashlib.sha1, but if you use NIST256p or a longer curve, you can use hashlib.sha256 instead.

There are also multiple ways to represent a signature. The default sk.sign() and vk.verify() methods present it as a short string, for simplicity and minimal overhead. To use a different scheme, use the sk.sign(sigencode=) and vk.verify(sigdecode=) arguments. There are helper funcions in the "ecdsa.util" module that can be useful here.

It is also possible to create a SigningKey from a "seed", which is deterministic. This can be used in protocols where you want to derive consistent signing keys from some other secret, for example when you want three separate keys and only want to store a single master secret. You should start with a uniformly-distributed unguessable seed with about curve.baselen bytes of entropy, and then use one of the helper functions in ecdsa.util to convert it into an integer in the correct range, and then finally pass it into SigningKey.from_secret_exponent(), like this:

from pyecdsa import NIST384p, SigningKey
from pyecdsa.util import randrange_from_seed__trytryagain

def make_key(seed):
  secexp = randrange_from_seed__trytryagain(seed, NIST384p.order)
  return SigningKey.from_secret_exponent(secexp, curve=NIST384p)

seed = os.urandom(NIST384p.baselen) # or other starting point
sk1a = make_key(seed)
sk1b = make_key(seed)
# note: sk1a and sk1b are the same key
sk2 = make_key("2-"+seed)  # different key

OpenSSL Compatibility

To produce signatures that can be verified by OpenSSL tools, or to verify signatures that were produced by those tools, use:

# openssl ecparam -name secp224r1 -genkey -out sk.pem
# openssl ec -in sk.pem -pubout -out vk.pem
# openssl dgst -ecdsa-with-SHA1 -sign sk.pem -out data.sig data
# openssl dgst -ecdsa-with-SHA1 -verify vk.pem -signature data.sig data
# openssl dgst -ecdsa-with-SHA1 -prverify sk.pem -signature data.sig data

sk.sign(msg, hashfunc=hashlib.sha1, sigencode=ecdsa.util.sigencode_der)
vk.verify(sig, msg, hashfunc=hashlib.sha1, sigdecode=ecdsa.util.sigdecode_der)

The keys that openssl handles can be read and written as follows:

sk = SigningKey.from_pem(open("sk.pem").read())
open("sk.pem","w").write(sk.to_pem())

vk = VerifyingKey.from_pem(open("vk.pem").read())
open("vk.pem","w").write(vk.to_pem())

Entropy

Creating a signing key with SigningKey.generate() requires some form of entropy (as opposed to from_secret_exponent/from_string/from_der/from_pem, which are deterministic and do not require an entropy source). The default source is os.urandom(), but you can pass any other function that behaves like os.urandom as the entropy= argument to do something different. This may be useful in unit tests, where you want to achieve repeatable results. The ecdsa.util.PRNG utility is handy here: it takes a seed and produces a strong pseudo-random stream from it:

from ecdsa.util import PRNG
from ecdsa import SigningKey
rng1 = PRNG("seed")
sk1 = SigningKey.generate(entropy=rng1)
rng2 = PRNG("seed")
sk2 = SigningKey.generate(entropy=rng2)
# sk1 and sk2 are the same key

Likewise, ECDSA signature generation requires a random number, and each signature must use a different one (using the same number twice will immediately reveal the private signing key). The sk.sign() method takes an entropy= argument which behaves the same as SigningKey.generate(entropy=).

Deterministic Signatures

If you call SigningKey.sign_deterministic(data) instead of .sign(data), the code will generate a deterministic signature instead of a random one. This uses the algorithm from RFC6979 to safely generate a unique k value, derived from the private key and the message being signed. Each time you sign the same message with the same key, you will get the same signature (using the same k).

This may become the default in a future version, as it is not vulnerable to failures of the entropy source.

Examples

Create a NIST192p keypair and immediately save both to disk:

from ecdsa import SigningKey
sk = SigningKey.generate()
vk = sk.get_verifying_key()
open("private.pem","w").write(sk.to_pem())
open("public.pem","w").write(vk.to_pem())

Load a signing key from disk, use it to sign a message, and write the signature to disk:

from ecdsa import SigningKey
sk = SigningKey.from_pem(open("private.pem").read())
message = open("message","rb").read()
sig = sk.sign(message)
open("signature","wb").write(sig)

Load the verifying key, message, and signature from disk, and verify the signature:

from ecdsa import VerifyingKey, BadSignatureError
vk = VerifyingKey.from_pem(open("public.pem").read())
message = open("message","rb").read()
sig = open("signature","rb").read()
try:
  vk.verify(sig, message)
  print "good signature"
except BadSignatureError:
  print "BAD SIGNATURE"

Create a NIST521p keypair

from ecdsa import SigningKey, NIST521p
sk = SigningKey.generate(curve=NIST521p)
vk = sk.get_verifying_key()

Create three independent signing keys from a master seed:

from pyecdsa import NIST192p, SigningKey
from pyecdsa.util import randrange_from_seed__trytryagain

def make_key_from_seed(seed, curve=NIST192p):
  secexp = randrange_from_seed__trytryagain(seed, curve.order)
  return SigningKey.from_secret_exponent(secexp, curve)

sk1 = make_key_from_seed("1:%s" % seed)
sk2 = make_key_from_seed("2:%s" % seed)
sk3 = make_key_from_seed("3:%s" % seed)

About

pure-python ECDSA signature/verification

Resources

License

Stars

Watchers

Forks

Packages

No packages published

Languages

  • Python 100.0%