Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Update readme.md #181

Open
wants to merge 1 commit into
base: master
Choose a base branch
from
Open

Update readme.md #181

Changes from all commits
Commits
Show all changes
1 commit
Select commit
File filter

Filter by extension

Filter by extension
Conversations
Failed to load comments.
Jump to
Jump to file
Failed to load files.
Diff view
Diff view
8 changes: 4 additions & 4 deletions libloragw/readme.md
View file
Open in desktop
Expand Up @@ -67,7 +67,7 @@ packet (and its parameters) from the host to the concentrator takes some time,
then there is the lgw_i_tx_start_delay_us, then the packet is emitted.

In 'triggered' mode (aka PPS/GPS mode), the packet, typically a beacon, is
emitted lgw_i_tx_start_delay_us microsenconds after a rising edge of the
emitted lgw_i_tx_start_delay_us microseconds after a rising edge of the
trigger signal. Because there is no way to anticipate the triggering event and
start the analog circuitry beforehand, that delay must be taken into account in
the protocol.
Expand All @@ -77,7 +77,7 @@ the protocol.
This module is used to access to the LoRa concentrator registers by name instead
of by address:

* lgw_connect, to initialise and check the connection with the hardware
* lgw_connect, to initialize and check the connection with the hardware
* lgw_disconnect, to disconnect the hardware
* lgw_soft_reset, to reset the whole hardware by resetting the register array
* lgw_reg_check, to check all registers vs. their default value and output the
Expand Down Expand Up @@ -166,7 +166,7 @@ And each time an NAV-TIMEGPS UBX message has been received:

Then, in other threads, you can simply used that continuously adjusted time
reference to convert internal timestamps to GPS time (using lgw_cnt2gps) or
the other way around (using lgw_gps2cnt). Inernal concentrator timestamp can
the other way around (using lgw_gps2cnt). Internal concentrator timestamp can
also be converted to/from UTC time using lgw_cnt2utc/lgw_utc2cnt functions.

### 2.6. loragw_radio ###
Expand All @@ -184,7 +184,7 @@ This module is only required for SX1301AP2 reference design.
### 2.8. loragw_lbt ###

This module contains functions to configure and use the "Listen-Before-Talk"
feature (refered as LBT below). It depends on the loragw_fpga and loragw_radio
feature (referred as LBT below). It depends on the loragw_fpga and loragw_radio
modules.

LBT feature is only available on SX1301AP2 reference design, which provides the
Expand Down