C++ JURA Bluetooth protocol implementation for controlling a JURA coffee maker over a Bluetooth connection.
For a device to be able to connect to an JURA coffee maker via Bluetooth, usually a Smart Control dongle is required.
Most of this was done by Reverse Engineering the Android APK.
- Protocol
- Bluetooth Characteristics
- Brewing Coffee
- Building
- Reverse Engineering
- License and Copyright Notice
There are several steps of obfuscation being done by the JURA coffee maker to prevent others from reading the bare protocol or sending arbitrary commands to it.
To connect to a JURA coffee maker via Bluetooth, a Smart Control dongle is required.
This dongle has to be plugged into the coffee maker.
Once this has been done, we can connect to the TT214H BlueFrog device via Bluetooth.
Once connected, we have to obtain the key used for decoding and encoding the data to be sent.
This is done by analyzing the advertisement data or, more concretely, the manufacturer data found when scanning for devices.
Here the manufacturer data is structured as follows:
0 1 2 3
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| key | bfMajVer | bfMinVer | unused |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| articleNumber | machineNumber |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| serialNumber | machineProdDate |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| machineProdDateUCHI | unused | statusBits |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Optional extended data starting at byte 28:
0 1 2 3
0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7 0 1 2 3 4 5 6 7
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
+ bfVerStr +
| |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
+ +
| |
+ coffeeMachineVerStr +
| |
+ +
| |
+ +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| | lastConnectedTabledID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| |
+-+-+-+-+-+-+-+-+
key: 8 Bit. Starts at byte 0. The key is used for decoding and encoding data.bfMajVer: 8 Bit. Starts at byte 1. BlueFrog major version number.bfMinVer: 8 Bit. Starts at byte 2. BlueFrog minor version number.articleNumber: 16 Bit. Starts at byte 4. Article number in little-endian.machineNumber: 16 Bit. Starts at byte 6. Machine number in little-endian.serialNumber: 16 Bit. Starts at byte 8. Serial number in little-endian.machineProdDate: 16 Bit. Starts at byte 10. Machine production date in a special format.machineProdDateUCHI: 16 Bit. Starts at byte 12. Probably the steam plate production date in a special format.statusBits: 8 Bit. Starts at byte 15. Some initial status bits: 4 - supports incasso, 6 - supports master pin, 7 - supports resetbfVerStr: 8 Byte. Starts at byte 27 BlueFrog ASCII version string (optional).coffeeMachineVerStr: 17 Byte. Starts at byte 35. Coffee maker ASCII version string (optional).lastConnectedTabledID: 32 Bit. Starts at byte 51. An int representing the last connection ID.
The following is used to parse the machineProdDate and machineProdDateUCHI dates.
void to_ymd(const std::vector<uint8_t>& data, size_t offset) {
uint16_t date = to_uint16_t_little_endian(data, offset); // Convert two bytes (little-endian) to an unsigned short
uint16_t year = ((date & 0xFE00) >> 9) + 1990;
uint16_t month = (date & 0x1E0) >> 5;
uint16_t day = date & 1F;
}Once we have obtained the key described above, we can start decoding read data from the Bluetooth characteristics.
Have a look at this implementation of the encDecBytes, which takes our obtained key and some data to decode or encode.
Once decoded successfully, the first byte of the resulting data has to be the key, otherwise the decoding failed.
When encoding data that should be written to Bluetooth characteristics, we again need the key we have obtained described above.
First we have to make sure we set the first byte of your data to the key and then feed it to encDecBytes, as we have done for decoding.
The coffee maker stays initially connected for 20 seconds. After that, it disconnects.
To prevent this, we have to send at least every 10 seconds a heartbeat to it.
The heartbeat is 0x007F80 encoded and then sent to the P Mode Characteristic 5a401529-ab2e-2548-c435-08c300000710.
For example, if the key is 0x2A, the encoded data sent should be 0x77656d (without the 0x ;) ).
Keep in mind, we have to set byte zero of our data that should be encoded to the key: 0x007F80 -> 0x2A7F80 -> 0x77656d
Here is an overview of all the known characteristics and services exposed by the coffee maker and some additional information in case we have found out how to use them.
| Name | Services | Notes |
|---|---|---|
| Default | 5a401523-ab2e-2548-c435-08c300000710 |
Default service containing all relevant characteristics. |
| UART | 5a401623-ab2e-2548-c435-08c300000710 |
Contains a TX and RX UART characteristic. |
| Name | Characteristic | Encoded |
|---|---|---|
| About Machine | 5A401531-AB2E-2548-C435-08C300000710 |
false |
| Machine Status | 5a401524-ab2e-2548-c435-08c300000710 |
true |
| Barista Mode | 5a401530-ab2e-2548-c435-08c300000710 |
true |
| Product Progress | 5a401527-ab2e-2548-c435-08c300000710 |
true |
| P Mode | 5a401529-ab2e-2548-c435-08c300000710 |
true |
| P Mode Read | 5a401538-ab2e-2548-c435-08c300000710 |
UNKNOWN |
| Start Product | 5a401525-ab2e-2548-c435-08c300000710 |
true |
| Statistics Command | 5A401533-ab2e-2548-c435-08c300000710 |
true |
| Statistics Data | 5A401534-ab2e-2548-c435-08c300000710 |
UNKNOWN |
| Update Product Statistics | 5a401528-ab2e-2548-c435-08c300000710 |
UNKNOWN |
| UART TX | 5a401624-ab2e-2548-c435-08c300000710 |
true |
| UART RX | 5a401625-ab2e-2548-c435-08c300000710 |
true |
5A401531-AB2E-2548-C435-08C300000710- Encoded:
false
This characteristic can only be read and provides general information about the coffee maker, like the bfVerStr`` (8 byte, starts at byte 27) and the coffeeMachineVerStr` (17 byte, starts at byte 35).
5a401524-ab2e-2548-c435-08c300000710- Encoded:
true
When reading from this characteristic, the received data has to be decoded. Once decoded, the first byte has to be the key used for decoding. Otherwise, something went wrong.
Starting from byte 1, the data represents status bits for the coffee maker.
For example, bit 0 is set in case the water tray is missing and bit 1 of the first byte in case there is not enough water.
For an exact mapping of bits to their action, we need the machine files found, for example, inside the Android app.
More about this here: Reverse Engineering
5a401529-ab2e-2548-c435-08c300000710- Encoded:
trueTo begin with: I don't know what the "P" stands for. Used for sending the heartbeat to the coffee maker to prevent it from disconnecting.
5a401525-ab2e-2548-c435-08c300000710- Encoded:
trueUsed to start preparing products. How to brew coffee can be found here: Brewing Coffee
5a401530-ab2e-2548-c435-08c300000710- Encoded:
true
Used for locking and unlocking the coffee maker screen and all its buttons. This could be used in a way where users have to authenticate first via some external service (e.g., an RFID or NFC card). The coffee maker would always be locked and the only way to create a cup of coffee was by sending commands via Bluetooth.
Locking
Write 0x0001 to this characteristic to lock the coffee maker.
Encode this message like all other messages, but do not override the first byte at the end with the key.
Here is an example:
0x0001 gets encoded to 0x77E0 using the key 0x2A and then sent to the characteristic.
Unlocking
Write 0x0000 to this characteristic to lock the coffee maker.
Encode this message like all other messages, but do not override the first byte at the end with the key.
Here is an example:
0x0000 gets encoded to 0x77E1 using the key 0x2A and then sent to the characteristic.
5a401624-ab2e-2548-c435-08c300000710- Encoded:
UNKNOWN
Probably exposes a raw TX interface for interacting directly with the coffee maker.
5a401625-ab2e-2548-c435-08c300000710- Encoded:
UNKNOWN
Probably exposes a raw RX interface for interacting directly with the coffee maker.
5A401533-ab2e-2548-c435-08c300000710- Encoded:
true
Allows requesting statistics like product counts and maintenance data from the coffee maker. A command sent to this characteristic is built as follows and consists of the following 5 bytes (hexadecimal):
00 0001 FFFF
0x00The first by has to be set to 0.0x0001To request the overall product statistics. To get the daily counter use0x0010.0xFFFFDefines the products we want to retrieve statistics for. All bits set to one forces data for all products. Selecting only specific products is done as follows:
void get_prod_stat_bits() const {
std::array<uint8_t, 2> bArr{0};
for (const Product& p : joe->products) {
size_t code = p.code_to_size_t();
code /= 4;
size_t arrOffset = code / 8;
assert(arrOffset < bArr.size());
bArr[arrOffset] = (1 << (code % 8)) | (bArr[arrOffset] & 0xFF);
}
// The resulting bytes are now inside bArr.
}Once data has been written to the characteristic, we can read from it after a delay of 1200 ms.
The command indicates success when the value read does not start with 0x0E.
For example:
0x0EA2A2A2 -> We wrote an invalid command to the characteristic.
0xA200A2A2 -> Success, we now can read all statistics from the "Statistics Data" characteristic.
0x4200A2A2 -> Success, we now can read all statistics from the "Statistics Data" characteristic.
5A401534-ab2e-2548-c435-08c300000710- Encoded:
true
This characteristic contains the statistics requested by sending a request to the Statistics Command characteristic.
Such a response could look as follows (hex):
00014E00000000002700009800000A00FFFF00000300FFFF00000900FFFF00FFFF00FFFF00FFFF00006700FFFF00FFFF00FFFF00000000000200000000FFFF00FFFF00FFFF00FFFF00FFFF00FFFF00FFFF00FFFF00FFFF00FFFF00FFFF00FFFF00000000000000000000000000FFFF00FFFF00FFFF00FFFF00000000000000000000000000FFFF00FFFF00FFFF00FFFF00000000000000000000000000FFFF00FFFF00FFFF00FFFF0000000000000000000000000000000000000000000000000000000000000000
It is split into multiple parts. Each part consists of six hex chars (3 bytes).
00014E 000000 000027 000098 00000A 00FFFF 000003 00FFFF 000009 00FFFF...
Each block describes the counter for a different product, except the first block.
The first block (0x00014E in this case) represents the total product count.
In this example, the coffee maker has produced 0x14E (or 334 in decimal) products.
The offset of a product statistic is calculated by the product code found inside the machine file for the coffee maker.
For example, inside the EF532V2.xml file, we find the following information: <PRODUCT Code="03" Name="Coffee" ...
Code 0x03 indicates we find the product count for "Coffee" at index 0x03.
The fourth block (counting from zero) is 0x000098, translated to decimal, means the coffee maker has already produced 152 cups of regular "Coffee".
A command to brew a coffee consists of multiple parts.
Those parts depend on the machine file for the coffee maker.
The following example uses the EF532V2.xml file for an JURA E6 coffee maker.
More about this here: Reverse Engineering
For example, we have a look at the following command (decoded) sent to the coffee maker:
00 03 00 04 14 0000 01 00010000000000 2A
0 1 2 3 4 5 6 7 8
0: Will be replaced later by thekey, when encoding.1: Product type e.g.03for coffee, or04for a cappuccino.2: Unknown3: Strength when brewing a coffee. Value between01and08with04being the default.4: Amount of water in seconds. 1 second equals 5 ml water.5: Unknown6: Temperature.01Normal,02High7: Unknown8: Probably some kind of checksum or the same value as thekeyat part0.
The following requirements are required to build this project.
- A C++20 compatible compiler like gcc or clang
- The build system is written using CMake
- For managing dependencies in CMake, we are using conan
Since this lib uses the machine files provided by JURA in their Android APK, we have to extract them first. For this, you have to perform the following steps:
- Visit the Google Play page for the
J.O.E.® – Jura Operating Experience. - Copy the page URL.
- Use your favorite APK downloader to obtain the latest
J.O.E.® – Jura Operating ExperienceAPK. For example, one could use this page: https://apps.evozi.com/apk-downloader/?id=ch.toptronic.joe - Place it under
src/resources - Open a terminal under
src/resources - Execute the
extract_apk.shbash script to extract all required files. Example:./extract_apk.sh myPathToTheJuraJoeApk.apk - Done
To install those dependencies on Fedora, run the following commands:
sudo dnf install -y gcc clang cmake python3 python3-pip
pip3 install --user conan==1.59.0 # conan 2.x.x is not supported right nowTo install those dependencies on a Raspberry Pi, running the Raspberry Pi OS, run the following commands:
sudo apt install -y cmake python3 python3-pip
pip3 install --user conan==1.59.0 # conan 2.x.x is not supported right nowFor all the other requirements, head over here: https://github.com/Jutta-Proto/hardware-pi#raspberry-pi-os
Run the following commands to build this project:
# Clone the repository:
git clone https://github.com/Jutta-Proto/protocol-bt-cpp.git
# Switch into the newly cloned repository:
cd protocol-bt-cpp
# Build the project:
mkdir build
cd build
cmake ..
cmake --build .Most of the information found here has been discovered by reverse engineering the Android APK and spoofing the traffic between the app and dongle.
To reverse engineer the app, follow the following steps:
- Download the
JURA J.O.E.®app from the Google Play Store. For this, you can use, for example, the APK DOWNLOADER from Hamidreza Moradi. - Once you have the APK, you can use JADX too. Most of the code is written in Java, but there are parts written in Kotlin, which will not be able to be decompiled from Java byte code.
- In JADEX have a look at the
resources/assets/machinefilesdirectory, where you can find all machine files describing individual coffee makers and their available functions.
This piece of software uses the following other libraries and dependencies:
Catch2 is mainly a unit testing framework for C++, but it also provides basic micro-benchmarking features and simple BDD macros.
Source: https://github.com/catchorg/Catch2
License
Boost Software License - Version 1.0 - August 17th, 2003
Permission is hereby granted, free of charge, to any person or organization
obtaining a copy of the software and accompanying documentation covered by
this license (the "Software") to use, reproduce, display, distribute,
execute, and transmit the Software, and to prepare derivative works of the
Software, and to permit third-parties to whom the Software is furnished to
do so, all subject to the following:
The copyright notices in the Software and this entire statement, including
the above license grant, this restriction and the following disclaimer,
must be included in all copies of the Software, in whole or in part, and
all derivative works of the Software, unless such copies or derivative
works are solely in the form of machine-executable object code generated by
a source language processor.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NON-INFRINGEMENT. IN NO EVENT
SHALL THE COPYRIGHT HOLDERS OR ANYONE DISTRIBUTING THE SOFTWARE BE LIABLE
FOR ANY DAMAGES OR OTHER LIABILITY, WHETHER IN CONTRACT, TORT OR OTHERWISE,
ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
DEALINGS IN THE SOFTWARE.
Very fast, header-only/compiled, C++ logging library.
Source: https://github.com/gabime/spdlog
License
The MIT License (MIT)
Copyright (c) 2016 Gabi Melman.
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in
all copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
THE SOFTWARE.
-- NOTE: Third party dependency used by this software --
This software depends on the fmt lib (MIT License),
and users must comply to its license: https://github.com/fmtlib/fmt/blob/master/LICENSE.rst
Small, easy-to-use and fast header-only library for reading comma separated value (CSV) files.
Source: https://github.com/ben-strasser/fast-cpp-csv-parser
License
Copyright (c) 2015, ben-strasser
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
* Neither the name of fast-cpp-csv-parser nor the names of its
contributors may be used to endorse or promote products derived from
this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
TinyXML-2 is a simple, small, efficient, C++ XML parser that can be easily integrated into other programs.
Source: https://github.com/leethomason/tinyxml2
License
This software is provided 'as-is', without any express or implied
warranty. In no event will the authors be held liable for any
damages arising from the use of this software.
Permission is granted to anyone to use this software for any
purpose, including commercial applications, and to alter it and
redistribute it freely, subject to the following restrictions:
1. The origin of this software must not be misrepresented; you must
not claim that you wrote the original software. If you use this
software in a product, an acknowledgment in the product documentation
would be appreciated but is not required.
2. Altered source versions must be plainly marked as such, and
must not be misrepresented as being the original software.
3. This notice may not be removed or altered from any source
distribution.
A date and time library based on the C++11/14/17 header.
Source: https://github.com/HowardHinnant/date
License
The source code in this project is released using the MIT License. There is no
global license for the project because each file is licensed individually with
different author names and/or dates.
If you contribute to this project, please add your name to the license of each
file you modify. If you have already contributed to this project and forgot to
add your name to the license, please feel free to submit a new P/R to add your
name to the license in each file you modified.
For convenience, here is a copy of the MIT license found in each file except
without author names or dates:
The MIT License (MIT)
Permission is hereby granted, free of charge, to any person obtaining a copy
of this software and associated documentation files (the "Software"), to deal
in the Software without restriction, including without limitation the rights
to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
copies of the Software, and to permit persons to whom the Software is
furnished to do so, subject to the following conditions:
The above copyright notice and this permission notice shall be included in all
copies or substantial portions of the Software.
THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
SOFTWARE.
A event library for callbacks, event dispatcher, and event queue. Source: https://github.com/wqking/eventpp
License
eventpp library
Copyright (C) 2018 Wang Qi (wqking)
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
A library used to access Generic Attribute Profile (GATT) protocol of BLE (Bluetooth Low Energy) devices. Source: https://github.com/labapart/gattlib
