Stand With Ukraine 🇺🇦

StatsD HTTP Proxy

StatsD HTTP proxy with REST interface for using in browsers

StatsD uses UDP connections, and can not be used directly from browser. This server is a HTTP proxy to StatsD, useful for sending metrics to StatsD from frontend by AJAX.

Requests may be optionally authenticated using JWT tokens.

Installation

Build from sources

git clone git@github.com:GoMetric/statsd-http-proxy.git
make build

Build docker image

Build your own docker image: https://github.com/GoMetric/statsd-http-proxy-docker

Official docker image

Use Docker image:

Run by Docker with insecure connection:

docker run -p 80:80 gometric/statsd-http-proxy:latest --verbose

Run by Docker with secure connection:

docker run -p 4433:4433 -v "$(pwd)":/certs/  gometric/statsd-http-proxy:latest --verbose --http-port=4433 --tls-cert=/certs/cert.pem --tls-key=/certs/key.pem

Requirements

GoMetric/go-statsd-client - StatsD client library for Go
dgrijalva/jwt-go - JSON Web Tokens builder and parser
gorilla/mux - URL router and dispatcher

Proxy client for browser

Basic implementation of proxy client may be found at https://github.com/GoMetric/statsd-http-proxy-client.

Nginx config

Configuration of Nginx balancer:

server {
    listen 443 http2;

    server_name statsd-proxy.example.com;

    ssl on;
    ssl_certificate     /etc/pki/nginx/ssl.crt;
    ssl_certificate_key /etc/pki/nginx/ssl.key;

    upstream statsd_proxy {
        keepalive 100;
        server statsd-proxy-1:8825 max_fails=0;
        server statsd-proxy-2:8825 max_fails=0;
    }
    
    location / {
        proxy_pass http://statsd_proxy;
        proxy_redirect off;
        proxy_http_version 1.1;
        proxy_set_header Connection "keep-alive";
    }
}

Usage

Run server (HTTP):

statsd-http-proxy \
    --verbose \
    --http-host=127.0.0.1 \
    --http-port=8080 \
    --statsd-host=127.0.0.1 \
    --statsd-port=8125 \
    --jwt-secret=somesecret \
    --metric-prefix=prefix.subprefix

Run server (HTTPS):

statsd-http-proxy \
    --verbose \
    --http-host=127.0.0.1 \
    --http-port=433 \
    --tls-cert=cert.pem \
    --tls-key=key.pem \
    --statsd-host=127.0.0.1 \
    --statsd-port=8125 \
    --jwt-secret=somesecret \
    --metric-prefix=prefix.subprefix

Print server version and exit:

statsd-http-proxy --version

Command line arguments:

Parameter	Description	Default value
verbose	Print debug info to stderr	Optional. Default false
http-host	Host of HTTP server	Optional. Default 127.0.0.1. To accept connections on any interface, set to ""
http-port	Port of HTTP server	Optional. Default 80
http-timeout-read	The maximum duration in seconds for reading the entire request, including the body	Optional. Defaults to 1 second
http-timeout-write	The maximum duration in seconds before timing out writes of the respons	Optional. Defaults to 1 second
http-timeout-idle	The maximum amount of time in seconds to wait for the next request when keep-alives are enabled	Optional. Defaults to 1 second
tls-cert	TLS certificate for the HTTPS	Optional. Default "" to use HTTP. If both tls-cert and tls-key set, HTTPS is used
tls-key	TLS private key for the HTTPS	Optional. Default "" to use HTTP. If both tls-cert and tls-key set, HTTPS is used
statsd-host	Host of StatsD instance	Optional. Default 127.0.0.1
statsd-port	Port of StatsD instance	Optional. Default 8125
jwt-secret	JWT token secret	Optional. If not set, server accepts all connections
metric-prefix	Prefix, added to any metric name	Optional. If not set, do not add prefix
version	Print version of server and exit	Optional

Sample code to send metric in browser with JWT token in header:

$.ajax({
    url: 'http://127.0.0.1:8080/count/some.key.name',
    method: 'POST',
    headers: {
        'X-JWT-Token': 'some-jwt-token'
    },
    data: {
        value: 100500
    }
});

Authentication

Authentication is optional. It based on passing JWT token to server, encrypted with secret, specified in jwt-secret command line argument. If secret not configured in jwt-secret, then requests to server accepted without authentication. Token sends to server in X-JWT-Token header or in token query parameter.

We recommend to use JWT tokens to prevent flood requests: you need to setup JWT token expiration time, and update JWT token in browser each time you get 403 in response.

Rest resources

See statsd ductmentation about supported types.

Heartbeat

GET /heartbeat

If server working, it responds with OK

Count

POST /count/{key}
X-JWT-Token: {tokenString}
value=1&sampleRate=1

Parameter	Description	Default value
value	Value. Negative to decrease	Optional. Default 1
sampleRate	Sample rate to skip metrics	Optional. Default to 1: accept all

Gauge

Gauge is an arbitrary value. Only the last value during a flush interval is flushed to the backend. If the gauge is not updated at the next flush, it will send the previous value. Gauge also may be set relatively to previously stored value. Is shift not passed, then value used. If value not passed, used default value equals 1. To set a gauge to a negative number you need first set it to 0.

Absolute value:

POST /gauge/{key}
X-JWT-Token: {tokenString}
value=1

Shift of previous value:

POST /gauge/{key}
X-JWT-Token: {tokenString}
shift=-1

Parameter	Description	Default value
value	Integer value	Optional. Default 1
shift	Signed int, relative to previously stored value	Optional

Timing

POST /timing/{key}
X-JWT-Token: {tokenString}
time=1234567&sampleRate=1

Parameter	Description	Default value
time	Time in milliseconds	Required
sampleRate	Float sample rate to skip metrics from 0 to 1	Optional. Default to 1: accept all

Set

POST /set/{key}
X-JWT-Token: {tokenString}
value=1

Parameter	Description	Default value
value	Integer value	Optional. Default 1

Response

Server sends 200 OK if send success, even StatsD server is down.

Other HTTP status codes:

CODE	Description
400 Bad Request	Invalid parameters specified
401 Unauthorized	Token not sent
403 Forbidden	Token invalid/expired
404 Not found	Invalid url requested
405 Wrong method	Request method not allowed for resource

Testing

It is useful for testing to start netcat UDP server, listening for connections and watch incoming metrics. To start server run:

nc -kluv localhost 8125

To send comamnd to statsd, run:

echo "counters" | nc localhost 8125

Benchmark

Machine for benchmarking:

Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz Dual Core / 8 GB RAM

Os:

Linux hp 4.15.0-65-generic #74-Ubuntu SMP Tue Sep 17 17:06:04 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux

Sysctl:

sudo sysctl net.ipv4.ip_local_port_range="15000 61000"
sudo sysctl net.ipv4.tcp_fin_timeout=30

Benchmarked by siege v. 4.0.4

Proxy CLI arguments

Without JWT token:

$ GOMAXPROCS=1 ./bin/statsd-http-proxy --http-host=127.0.0.1 --http-port=8080 --statsd-host=127.0.0.1 --statsd-port=8125

With JWT token:

$ GOMAXPROCS=1 ./bin/statsd-http-proxy --http-host=127.0.0.1 --http-port=8080 --statsd-host=127.0.0.1 --statsd-port=8125 --jwt-secret=somesecret

Requests to proxy

Router: Gorilla MUX, Keep alive: disabled, JWT auth: disabled

siege -R <(echo connection = close) -c 255 -r 2000 "http://127.0.0.1:8080/count/a.b.c.d POST value=42"

Router: Gorilla MUX, Keep alive: enabled, JWT auth: disabled

$ siege -R <(echo connection = keep-alive) -c 255 -r 2000 "http://127.0.0.1:8080/count/a.b.c.d POST value=42"

Router: Gorilla MUX, Keep alive: disabled, JWT auth: enabled

$ siege -R <(echo connection = close) -c 255 -r 2000 -H 'X-JWT-Token:eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJzdGF0c2QtcmVzdC1zZXJ2ZXIiLCJpYXQiOjE1MDY5NzI1ODAsImV4cCI6MTg4NTY2Mzc4MCwiYXVkIjoiaHR0cHM6Ly9naXRodWIuY29tL3Nva2lsL3N0YXRzZC1yZXN0LXNlcnZlciIsInN1YiI6InNva2lsIn0.sOb0ccRBnN1u9IP2jhJrcNod14G5t-jMHNb_fsWov5c' "http://127.0.0.1:8080/count/a.b.c.d POST value=42"

Router: Gorilla MUX, Keep alive: enabled, JWT auth: enabled

$ siege -R <(echo connection = keep-alive) -c 255 -r 2000 -H 'X-JWT-Token:eyJ0eXAiOiJKV1QiLCJhbGciOiJIUzI1NiJ9.eyJpc3MiOiJzdGF0c2QtcmVzdC1zZXJ2ZXIiLCJpYXQiOjE1MDY5NzI1ODAsImV4cCI6MTg4NTY2Mzc4MCwiYXVkIjoiaHR0cHM6Ly9naXRodWIuY29tL3Nva2lsL3N0YXRzZC1yZXN0LXNlcnZlciIsInN1YiI6InNva2lsIn0.sOb0ccRBnN1u9IP2jhJrcNod14G5t-jMHNb_fsWov5c' "http://127.0.0.1:8080/count/a.b.c.d POST value=42"

Results

Concurent 255 users made 2000 requests each. Total request count: 510000

Router	Keep alive	JWT	Elapsed time	Transaction rate	Concurrency
GorillaMux 1.7.3	disabled	disabled	94.73 secs	5383.72 trans/sec	244.02
GorillaMux 1.7.3	enabled	disabled	55.70 secs	9156.19 trans/sec	252.27
GorillaMux 1.7.3	disabled	enabled	117.80 secs	4329.37 trans/sec	245.98
GorillaMux 1.7.3	enabled	enabled	77.97 secs	6540.98 trans/sec	253.70
HttpRouter 1.3.0	disabled	disabled	92.93 secs	5487.99 trans/sec	244.09
HttpRouter 1.3.0	enabled	disabled	54.87 secs	9294.70 trans/sec	252.65
HttpRouter 1.3.0	disabled	enabled	115.35 secs	4421.33 trans/sec	245.48
HttpRouter 1.3.0	enabled	enabled	75.14 secs	6787.33 trans/sec	253.25

Name		Name	Last commit message	Last commit date
Latest commit History 254 Commits
bench		bench
demo		demo
proxy		proxy
.gitignore		.gitignore
.travis.yml		.travis.yml
CHANGELOG.md		CHANGELOG.md
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
go.mod		go.mod
go.sum		go.sum
main.go		main.go

License

GoMetric/statsd-http-proxy

Folders and files

Latest commit

History

Repository files navigation