Home Assistant - Solar Optimizer Solaredge - Floorplan

This version has 24 Panels

Author Notes

I found that using Microsoft Visio was much easier to design the layout than that of Inkscape.

However Inkscape was needed to then make the SVG.

You can edit the Solar_Layout.svg in Inkscape for your layout needs. Be mindful that the text and the boxes are not grouped.

However, all the elements should be pre-named to match that of the yamls. (aka, it should just work)

The Origional repo was in italian so I spent the effort in converting that to English -- please open any issues if you find anything that needs to be translated.

Installation Steps

1. Install the Integration SolaredgeOptimizers

   1a. If you get "unavialable" on any of the values -- you may need to edit the sensor.py, from 60 to 300.

2. Install the Integration HA Floorplan

3. Copy the pkg_panelsolar.yaml and secrets.yaml file (if it already exists copy the contents of your secrets.yaml) in the "/config/packages" folder and edit it following the instructions inside the secrets.yaml file.

4. In the /www/floorplan/solar/ folder (create it if it doesn't exist) copy the Solar_Layout.svg file inside it and create a file with the name panelsunpower.css (for any CSS-type changes)

5. In HA, create a new Dashboard (settings/dashboards "add dashboard"), open the new Dashboard created click on the 3 vertical dots at the top right to edit the Dashboard, click again on the 3 vertical dots for "Raw Configuration Editor" and copy the contents of plan_panelsolar.yaml file into it.

Post Edits

1. Your SolarEdge panel numbers will vary from these install files.

   a. For example, mine started at sensor.power_1_0_25 because the previous 24 panels module devices were swapped out with new ones -- Tesla failed to update the SolaarEdge site (its odd, i know) -- Edit the entities in the plan_panelsolar.ymal accordingly.

2. Edit the Solar_Layout.svg in Inkscape to preserve the meta data elements and have the visual layout to match yours.