This is not needed anymore

To force unsecure, you can use the official Fibaro app and include the device as Walli. It will then be forced unsecure and added as the correct device.

Fibaro

This app adds support for Fibaro devices in Homey.

Battery powered sensors

Should you experience problems with battery powered sensors, please remove those devices and re-add them to Homey.

Supported devices with most common parameters:

• FGD-211, Dimmer
• FGD-212, Dimmer 2
• FGFS-101, Flood Sensor
• FGFS-101-PLUS, Flood Sensor (Z-Wave Plus)
• FGGC-001, Swipe
• FGK-101, Door/Window Sensor
• FGK-10x, Door/Window Sensor (Z-Wave Plus)
• FGMS-001, Motion Sensor
• FGMS-001-PLUS, Motion Sensor (Z-Wave Plus)
• FGPB-101, Push Button
• FGS-211, Relay Switch
• FGS-212, Relay Switch 2
• FGS-213, Single Switch 2
• FGS-221, Double Relay Switch
• FGS-222, Double Relay Switch 2
• FGS-223, Double Switch 2
• FGSD-002, Smoke Detector (Z-Wave Plus)
• FGSS-001, Smoke Sensor
• FGT-001, Heat Controller
• FGCD-001, CO Sensor
• FGRGBWM-441, RGBW Controller
• FGWPx-101/102, Wall Plug
• FGWPx-102-PLUS, Wall Plug (Z-Wave Plus)
• FGKF-601, KeyFob (Z-Wave Plus)
• FGDW-002, Door/Window Sensor 2
• FGWDEU-111, Walli Dimmer
• FGWOF-011, Walli Outlet
• FGBS-222, Smart Implant

Supported devices with some parameters:

• FGR-221, Roller Shutter
• FGRM-222, Roller Shutter 2
• FGR-222, Roller Shutter 2 (v2.5)
• FGR-223, Roller Shutter 3,
• FGWREU-111, Walli Roller Shutter

NOTE:

FGKF-601

This device has no wake up interval. After changing settings, wake up the device manually (by using the exclusion button press sequence) to store them on the device.

FGS-2xx Devices:

Main Device = Also Relay/Switch 1 (S1/Q1) Relay/Switch 2 = Relay/Switch 2 (S2/Q2)

FGPB-101:

When the app has just started, it can take up to 2 minutes before it reacts. If it takes longer you (probably) need to restart your homey.

Change Log:

v 2.2.10

Fix settings and Flows for FGD-212, FGS-212, FGS-223.

v 2.2.8

Fix RGBW light temperature mode. Thanks to aartse for contributing his fix.

v 2.2.7

Changed FGRGBWM-441, RGBW Controller to turn of when a new dim value is set and the device is turned off. Corrected voltage measurements values for FGRGBWM-441, RGBW Controller. Added internal battery type for FGT-001, Heat Controller.

v 2.2.6

Capability fixes.

v 2.2.5

Improve response for FGT-001, Heat Controller.

v 2.2.1/2/3

Fixed RGBW controller using white when set to color mode. Renamed capabilities for Smart Implant.

v 2.2.0

Added basic support for Smart Implant

v 2.1.47

Fix CO sensor unsecure pairing. Updated meshdriver

v 2.1.46

Add battery types

v 2.1.44

RGBW Controller: Completely new implementation. All previous issues with this device should now be resolved. Flood Sensor: missing pairing icon, correctly reset the timeout for tamper alarm. CO Sensor: Set timeout for CO test mode.

v 2.1.43

Changes on Binary Sensor temperature sensors. Fix timeout for tamper alarm on Flood Sensor (FGFS-101) Fix for Door/Window sensor 2 alarms.

v 2.1.42

Fix test mode on CO sensor. Fix LED settings for some Walli devices. Updated meshdriver.

v 2.1.40/41

Fix icons for some devices.

v 2.1.39

Added multichannel node 2 for FGK-101 temperature sensor. Thanks Caseda! Fixed some settings regarding dimming for Dimmer 2. Fixed all flow triggers for Swipe. Fixed temperature sensor on Flood Sensor FGFS-101. String and translation corrections.

v 2.1.38

Fixed advanced parameters for Door/Window sensor 2.

v 2.1.36

Fixed advanced parameters for Wall Plug.

v 2.1.35

Include Fibaro Walli Socket and Dimmer. Updated product IDs. Updated meshdriver

v 2.1.34

Added product IDs for multiple devices. Improvements for Z-Wave Plus sensors.

v 2.1.32

Fixes to FGRGBWM-411 regarding hue and value changes not taking effect Fixes to the Smoke Detector, should now fire alarm smoke and alarm heat again Fixed no controls for FGR-221

v 2.1.31

Fixes to device icons

v 2.1.30

Enhancements to the FGSD-002 Smoke Detector

v 2.1.29

Fixes always on setting for FGWPE-101 (not Z-Wave plus) Contains fixes for the Fibaro Double Switch 2, measure and meter power on S2 have been brought back

v 2.1.30

Enhancements to the FGSD-002 Smoke Detector

v 2.1.29

Fixes always on setting for FGWPE-101 (not Z-Wave plus) Contains fixes for the Fibaro Double Switch 2, measure and meter power on S2 have been brought back

v 2.1.26 - 2.1.28

Important MeshDriver updates Fixes to the FGRGBWM-441

v 2.1.25

Updated MeshDriver

v 2.1.24

Re-added colour flows for the Fibaro Wall Plugs

v 2.1.23

Added the FGR-223 Roller Shutter 3

v 2.1.21 - 2.1.22

Small bug fixes

v 2.1.20

Improvements to color parsing for the FGRGBWM-441 Inversion setting added to the FGRM-222

v 2.1.19

Fixed FGR-222 (Fibaro Shutter 2) inversion

v 2.1.17 - 2.1.18

Fixed the Fibaro Button Flows

Fixed the Fibaro Double Switch S2 Switch

v 2.1.16

Fixed multiple asset and language related issues

v 2.1.13 - 2.1.15

Small fixes and performance improvements

v 2.1.12

Possible fix for the S2 issue on FGS-223

v 2.1.11

Added more than a 100 product IDs across devices.

v 2.1.10

Fixes an issue with the Roller Shutter module buttons not working.

Added product IDs for multiple devices

MeshDriver updated

v 2.1.1 - 2.1.9

FGBS-001 now available again

Adds support for "Start dim level change" and "Stop dim level change" action cards for the FGD-21x devices

Added product IDs for multiple devices to ensure they are recognised

Fixed a bug where dim levels above 50% would influence the saturation values of the FGRGBWM-441

Fixed colour behaviour of the FGRGBWM-441

Fixed a bug that would cause Flows to be unavailable for some devices

Fixed a bug that would cause invalid default values for device settings