SDR-projects

This repository contains a collection of C++ project for Software Defined Radios.

Software Dependencies

To build this project, make sure to install those dependencies:

• Liquid DSP version 1.3.2

sudo apt-get install automake autoconf
git clone git://github.com/jgaeddert/liquid-dsp.git
cd liquid-dsp
git checkout -b v1.3.2
./bootstrap.sh
./configure
make
sudo make install

• Soapy SDR version 0.7.2

sudo apt-get install libboost-all-dev
git clone https://github.com/pothosware/SoapySDR.git
cd SoapySDR && git checkout -b soapy-sdr-0.7.2
cd SoapySDR && mkdir build && cd build
cmake ..
make
sudo make install

SDR Compatibility

All the projects in this repo are using SoapySDR as an Abstraction Layer. This makes compatible with most Open-Source SDR:

• BladeRF, LimeSDR, HackRF, SDRplay, Airspy, RTL-SDR, Miri-SDR, USRP, RedPitaya, Pluto SDR

Note: Each radio has a different frequency range, maximum sample rate and number of channels. Depending on the radio, it may not be able to run all the projects in this repository. Since i do not own evey single Software Defined Radio, i cannot garantee it will run flawlessly on all of them. However, all the projects here were tested on the bladeRF-micro 2.0.

Build instruction

Simply call make inside the root directory. The compiled binary can be found inside the generated /bin folder.