A secure and high performances microkernel for building secure MCU-based IoTs

This repository contains the contribution of an "AUTOSAR Classic Playground" from Da Vinci Engineering GmbH to the open-source community. It has to be considered a continuous work in progress.

Fixed Radix Math library for embedded systems (opt for speed)

JAMA is a device to measure joint angles wirelessly with 9 DOF, using a microcontroller (ESP32) together with an inertial measure unit (GY-80).

Parse .hex firmwares files into a raw file for reversing.

Handheld LCR Meter Implementation using Tiva launchpad evaluation Board

ESP32 Test (Arduino IDE - Platformio). This code tests the main functionalities of ESP32 microcontroller.

Driver library for the TM4C123GH6PM Microcontroller

Remotely articulated MCU endpoints for Python

WIP: Funktionsgenerator mit Atmega328 und TFT Display

"Raayan Mini Board based STM32 Controller" Training Material By Kernel Masters

Projects developed using PIC microcontrollers in the discipline of microcomputers in 2017.1 at UFPE (Universidade Federal de Pernambuco).

ESP32 Board communicating with a BME680 breakout over I2C and publishing environmental data to an MQTT broker.

Dance-Pad Firmware and Calibration Tool

DIY ESP-NOW remote control for PC

Baremetal code to drive SSD1306 OLED Driver connected to an STM32F407 Board through SPI. This code runs without a standard C Runtime environment set by the compiler.

I am pratham vora an embedded engineer . I like explore things in the world of embedded devices and explore behind the scenes working of any component to develop things from scratch and push it to the next level .I develop drivers for microcontrollers(ARM) from scratch and at this place you will find all my projects .

Toolset for profiling energy consumption of MCU based platforms

The NXP (founded by Philips) LPC2148 is an ARM7TDMI-S based high-performance 32-bit RISC Microcontroller with Thumb extensions 512KB on-chip Flash ROM with In-System Programming (ISP) and In-Application Programming (IAP), 32KB RAM, Vectored Interrupt Controller, Two 10bit ADCs with 14 channels, USB 2.0 Full Speed Device Controller, Two UARTs, on…