Skip to content

Issues: Ultimaker/Cura

New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

3,319 Open 11,898 Closed
3,319 Open 11,898 Closed
Author
Filter by author
Label
Filter by label
Use alt + click/return to exclude labels
or ⇧ + click/return for logical OR
Projects
Filter by project
Milestones
Filter by milestone
Assignee
Filter by who’s assigned
Sort
Sort by
Newest Oldest Most commented Least commented Recently updated Least recently updated Best match
Most reactions
👍 👎 😄 🎉 😕 ❤️ 🚀 👀

Issues list

2mm support towers with tree support and small angles Status: Under Investigation The issue has been confirmed or is assumed to be likely to be a real issue. It's pending discussion. Type: Bug The code does not produce the intended behavior.
#19157 opened May 28, 2024 by jonyo
4
Movement to the right and back edge before printing Status: Under Investigation The issue has been confirmed or is assumed to be likely to be a real issue. It's pending discussion. Type: Bug The code does not produce the intended behavior.
#19156 opened May 28, 2024 by loewilein
5
Unable to slice an Object with a Z height of .20mm ie a 1st layer print Status: Needs Info Needs more information before action can be taken. Status: Under Investigation The issue has been confirmed or is assumed to be likely to be a real issue. It's pending discussion. Type: Bug The code does not produce the intended behavior.
#19155 opened May 28, 2024 by MikeOxawopper
1
Specify a gap between outer wall and inner (next) wall Status: Triage This ticket requires input from someone of the Cura team Type: New Feature Adding some entirely new functionality.
#19149 opened May 28, 2024 by J12345T
5
cura stopped detecting my creality cr-10s (non-pro) printer through usb Status: Needs Info Needs more information before action can be taken. Type: Bug The code does not produce the intended behavior.
#19148 opened May 28, 2024 by 1043613lcpsorg
1
Add precise z-height setting. Status: Triage This ticket requires input from someone of the Cura team Type: New Feature Adding some entirely new functionality.
#19147 opened May 27, 2024 by T9Air
5
Blobbing with klipper after filament change Status: Needs Info Needs more information before action can be taken. Status: Under Investigation The issue has been confirmed or is assumed to be likely to be a real issue. It's pending discussion. Type: Discussion Open-ended discussion (compared to specific question).
#19146 opened May 27, 2024 by FuturSole145
1
Could not save to /AV_Tapa Tel 609 v1.gcode: [Errno 30] Read-only file system: '/AV_Tapa Tel 609 v1.gcode' Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19145 opened May 27, 2024 by Ciruplas
slice problem Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19143 opened May 27, 2024 by KriolLima
Unexpected Error Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19142 opened May 27, 2024 by MikeOxawopper
1
plugins/PostProcessingPlugin/scripts/PauseAtHeight.py should have a park value for the Z axis too Type: New Feature Adding some entirely new functionality.
#19140 opened May 26, 2024 by attikov
1
Really Very Slow import of .stl files Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19139 opened May 26, 2024 by redzabu
3
slicing will fail when you have an extension open Status: Needs Info Needs more information before action can be taken. Status: Under Investigation The issue has been confirmed or is assumed to be likely to be a real issue. It's pending discussion. Type: Bug The code does not produce the intended behavior.
#19138 opened May 26, 2024 by Rudewolf300
1
Unable to slice anything.... even calibration prints that I had just sliced and printed a few hours ago. Slicing Error 💥 A crash is caused by a model or a user interaction. This needs a differnt troubleshooting approach Status: Needs Info Needs more information before action can be taken. Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19137 opened May 26, 2024 by Dan-Kroll
1
The help system unable to scroll infill pattern Type: Bug The code does not produce the intended behavior.
#19134 opened May 25, 2024 by PGTBoos
2
When i click Slicing says: Slicing Failed Slicing Error 💥 A crash is caused by a model or a user interaction. This needs a differnt troubleshooting approach Status: Needs Info Needs more information before action can be taken. Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19130 opened May 24, 2024 by BLAI38
1
Ultimaker Method X not able to use single extruder full build volume Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19126 opened May 24, 2024 by rfrischmuth
9
Slicing Error for Fine resolution for UMS7 Slicing Error 💥 A crash is caused by a model or a user interaction. This needs a differnt troubleshooting approach Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19122 opened May 22, 2024 by ElecTechScotch
printing just stopped/paused Status: Duplicate Duplicate of another issue. Status: Under Investigation The issue has been confirmed or is assumed to be likely to be a real issue. It's pending discussion. Type: Bug The code does not produce the intended behavior.
#19121 opened May 22, 2024 by DragonDon
6
Slicing fails with support and certain scaling ranges Slicing Error 💥 A crash is caused by a model or a user interaction. This needs a differnt troubleshooting approach Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19120 opened May 22, 2024 by mkhazbak
Crash when ungrouping Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19119 opened May 22, 2024 by doubletrouble023
Slicing Failed Custom setup Hypercub Slicing Error 💥 A crash is caused by a model or a user interaction. This needs a differnt troubleshooting approach Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19118 opened May 21, 2024 by Asw20
Slicing Failed, 2 materials part Slicing Error 💥 A crash is caused by a model or a user interaction. This needs a differnt troubleshooting approach Status: Under Investigation The issue has been confirmed or is assumed to be likely to be a real issue. It's pending discussion. Type: Bug The code does not produce the intended behavior.
#19117 opened May 21, 2024 by dd00055
2
A title needed here Slicing Error 💥 A crash is caused by a model or a user interaction. This needs a differnt troubleshooting approach Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19116 opened May 21, 2024 by daverave999
Le logiciel n'arrive pas a me faire la découpe de ma pièce alors qu'elle est dans la zone d'impression Status: Needs Info Needs more information before action can be taken. Status: Triage This ticket requires input from someone of the Cura team Type: Bug The code does not produce the intended behavior.
#19115 opened May 21, 2024 by Davewellix
ProTip! Adding no:label will show everything without a label.