Eurotronic Comet Z-Wave: Configuration-parameters not changeable (Value update failed)

[Mangar2005]

Checklist

• I have read and followed the above instructions

• I have checked the troubleshooting section and my problem is not described there.

• I have read the changelog and my problem was not mentioned there or the fix did not work.

Describe the issue

What is happening?
Using current HAOS with current zwavejs UI.
Interview of device was succesful, device is functional with default-settings, but config-parameters cannot be changed - neither in zwavejs nor in UI. Error: "Value update failed".
Tried several inclusions close to controller (Zooz 800 EU), secure same as unsecure, no changes.

What did you expect to happen instead?
Change parameters with pre-selected choices to be succesful...

Software versions

Critical device: Node-ID: 65
Z-Wave JS UI: 3.5.0
Home Assistant Z-Wave Integration: 12.5.5

If you are using something non-standard, tell us here: Standard HAOS (current version) on Intel Nuc.

Device information

Manufacturer: Eurotronic (0x0148)
Model name: "Comet Z" - Comet Z-Wave (0x0004:0x0003)
Critical device: Node-ID: 65

Checklist

• I made sure to provide a driver log on level debug.

• The log includes a re-interview of the problematic device (if applicable).

• The log includes the problematic interaction with the device (if applicable).

• I provided the node ID of the problematic device (if applicable).

Upload Logfile

z-ui_2024-04-24.log

[zwave-js-bot]

👋 Hey @Mangar2005!

It looks like you attached a logfile, but its filename doesn't look like it a driver log that came from Z-Wave JS.

Please double-check that you uploaded the correct logfile. If you did, disregard this comment.

As a reminder, here's how to create one:

• Z-Wave JS UI
• Home Assistant Z-Wave Integration
• ioBroker.zwave2 Adapter

[Mangar2005]

zwavejs_2024-04-24.log

[Mangar2005]

dismissed the device now...