Master code set and get mechanism in doorlock through UI

[priyanka043]

Hi,

Is it possible to set and get the master code of the doorlock through UI

[robertsLando]

Sure, just go to node, user code CC, there you can find the master code input to get/set it

[priyanka043]

But here, i'm only able to see the set/get for user codes 1-250 not for the master code, can you please check the attached file

[robertsLando]

@priyanka043 I can't see the screenshot. You should wait it to end uploading before submitting the reply

[priyanka043]

[robertsLando]

Same as above, screenshot not visible

[priyanka043]

PFA logs

[robertsLando]

Go on node debug info tab and paste here the content

[priyanka043]

Hii Daniel, Here I am attaching the debug info data for the Yale Lock

…

On Wed, Nov 15, 2023 at 7:08 PM Daniel Lando ***@***.***> wrote: Go on node debug info tab and paste here the content — Reply to this email directly, view it on GitHub <https://github.com/zwave-js/zwave-js-ui/discussions/3421#discussioncomment-7577124>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BBJF6HAFZB7E4HHUAESMOVLYETAUFAVCNFSM6AAAAAA7KYKI4SVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKNZXGEZDI> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[robertsLando]

I don't see it

[priyanka043]

HI PFA log

…

On Wed, Nov 15, 2023 at 8:10 PM Daniel Lando ***@***.***> wrote: I don't see it — Reply to this email directly, view it on GitHub <https://github.com/zwave-js/zwave-js-ui/discussions/3421#discussioncomment-7577819>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BBJF6HGNGJ5P2CYTLGTT4V3YETH4HAVCNFSM6AAAAAA7KYKI4SVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TKNZXHAYTS> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[robertsLando]

Still don't see it. Notice that attached files to emails are not attached here on Github

[priyanka043]

doorlock debuginfo.pdf
Hi, please check this log file, please guide us to set / get mastercode for doorlock

[robertsLando]

Seems master code is not present on values. @priyanka043 are you sure that device supports master code?

cc @AlCalzone

[AlCalzone]

Please make a driver log of a re-interview, loglevel debug and attach it here as a file (drag & drop into the text field).

[priyanka043]

www-out.log
can you please check this log while i was adding the lock

[AlCalzone]

That's not a driver log. Read the link from my last post again.
Also you don't have to re-add it. Re-interviewing is enough.

[priyanka043]

can you please let me know where can i get the driver log. like how can i take that

[AlCalzone]

[priyanka043]

can yo please check this log
zwavejs_2023-11-29.log

[AlCalzone]

You need to re-interview the device while making the log.

Then wait until the status shows Complete again.

[priyanka043]

please check this
zwavejs_2023-11-29.log

[AlCalzone]

Your device reports support for User Code CC, version 1. Master codes are only available in version 2 of that CC.

[priyanka043]

can you please let me know where can we confirm that the doorlock is version 2 from the log.

[AlCalzone]

There are lines like

CNTRLR » [Node 013]   querying the CC version for Door Lock...

and then a bit below:

[Node 013]   supports CC Door Lock (0x62) in version 2

You'll have to distinguish between Door Lock CC and User Code CC. Door Lock CC is concerned with locking/unlocking the door.
User Code CC is concerned with managing the PIN codes. This one needs to be version 2 for master code support, but it is version 1:

2023-11-29T14:43:59.167Z DRIVER « [Node 013] [REQ] [BridgeApplicationCommand]
                                  │ RSSI: -89 dBm
                                  └─[VersionCCCommandClassReport]
                                      CC:      User Code
                                      version: 1
2023-11-29T14:43:59.169Z CNTRLR   [Node 013]   supports CC User Code (0x63) in version 1

[priyanka043]

thanks for your help, i have one more doubt, like when device user code is deleted the schedules related to that particular user code should automatically delete right?

[priyanka043]

Here, it is shown in yale manual that version 1 can be accessed through read/write , do you have any idea on this?

[AlCalzone]

Ok that looks like a workaround for the missing Master Code support in version 1.
0xFB is slot 251, which is just like any other user code from the Z-Wave perspective.

But... the lock reports that it only supports 250 codes, and Z-Wave JS prevents you from accessing other slots.
We'd have to override the response from the lock and hope that this enables you to access that slot.

[robertsLando]

Dunno if maybe they mean that settings one of the last user codes equals to set the master code. BTW that is so weird

[priyanka043]

if I select the config then it's asking for the file name but unable to update the file in that

…

On Sat, 2 Dec 2023, 00:32 AlCalzone, ***@***.***> wrote: No just put the file *inside* the config directory — Reply to this email directly, view it on GitHub <#6527 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BBJF6HAHKTXNW3W4WOGXZ7LYHISTJAVCNFSM6AAAAABABEV4YSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TOMZSG4YDS> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[priyanka043]

Hi, I have tried to create the file and i have copied the data, even though im not able to see anything regarding slot 251 PFA image.

…

On Sat, Dec 2, 2023 at 1:14 PM Daniel Lando ***@***.***> wrote: @priyanka043 <https://github.com/priyanka043> Don't you have direct access to that folder? If so use thst way instead of the ui... Using the ui should be easy, next to every folder (on the right) there is a button to create a new file, once you create the file give it the name and then paste inside the content. You cannot directly import a file in a folder or move them around AFAIK — Reply to this email directly, view it on GitHub <#6527 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BBJF6HBVKXMSWAZMPDPIPG3YHLL5JAVCNFSM6AAAAABABEV4YSVHI2DSMVQWIX3LMV43SRDJONRXK43TNFXW4Q3PNVWWK3TUHM3TOMZWGY3DE> . You are receiving this because you were mentioned.Message ID: ***@***.***>

[priyanka043]

[priyanka043]

Is that file is placed at the correct location?

[AlCalzone]

Looks good. Have you restarted Z-Wave JS UI and re-interviewed the device yet?
I'd like to see a driver log (level debug) of that re-interview to confirm the change does what it is supposed to.

[priyanka043]

zwavejs_2023-12-08.log
PFA driver log after re-interview node

[AlCalzone]

2023-12-08T11:26:46.098Z DRIVER   all queues idle
2023-12-08T11:26:46.206Z CNTRLR   [Node 001] Embedded device config loaded
2023-12-08T11:26:46.518Z CNTRLR   [Node 013] Embedded device config loaded
2023-12-08T11:26:46.708Z CNTRLR   [Node 016] Embedded device config loaded
2023-12-08T11:26:46.749Z CNTRLR   [Node 019] No device config found
2023-12-08T11:26:46.908Z CNTRLR   [Node 028] Embedded device config loaded
2023-12-08T11:26:46.981Z CNTRLR   [Node 037] Embedded device config loaded
2023-12-08T11:26:47.052Z CNTRLR   [Node 038] Embedded device config loaded
2023-12-08T11:26:47.082Z CNTRLR   [Node 050] Embedded device config loaded
2023-12-08T11:26:47.134Z CNTRLR   [Node 058] Embedded device config loaded
2023-12-08T11:26:47.166Z CNTRLR   [Node 060] Embedded device config loaded
2023-12-08T11:26:47.279Z CNTRLR   [Node 063] Embedded device config loaded
2023-12-08T11:26:47.324Z CNTRLR   [Node 070] Embedded device config loaded
2023-12-08T11:26:47.420Z CNTRLR   [Node 083] Embedded device config loaded
2023-12-08T11:26:47.555Z CNTRLR   [Node 085] Embedded device config loaded
2023-12-08T11:26:47.580Z CNTRLR   [Node 086] Embedded device config loaded
2023-12-08T11:26:47.591Z CNTRLR   [Node 087] No device config found
2023-12-08T11:26:47.643Z CNTRLR   [Node 088] Embedded device config loaded
2023-12-08T11:26:47.776Z CNTRLR   [Node 089] Embedded device config loaded
2023-12-08T11:26:47.826Z CNTRLR   [Node 093] Embedded device config loaded
2023-12-08T11:26:47.951Z CNTRLR   [Node 094] Embedded device config loaded
2023-12-08T11:26:47.962Z CNTRLR   [Node 098] No device config found
2023-12-08T11:26:48.019Z CNTRLR   [Node 109] Embedded device config loaded
2023-12-08T11:26:48.066Z CNTRLR   [Node 110] Embedded device config loaded
2023-12-08T11:26:48.101Z CNTRLR   [Node 111] Embedded device config loaded

Doesn't look like the custom config file was picked up.

Also, I need to see a log of the re-interview, not afterwards.

[priyanka043]

Hi PFA logs
zwavejs_current.log
zwavejs_2023-12-09.log

[priyanka043]

Please help us to get and set the master code provisioning. if any thing logs needed, let me know i will be updating.

[priyanka043]

Hi,

Did you see any mechanism to do this

[AlCalzone]

I'll answer when I find some time --> #6521

[priyanka043]

Hi,

How it is possible to send the raw data to zwavejs, i mean the zwave raw commands to controller, can you please provide any example to send any raw data to on/off a switch.

[robertsLando]

This is possible using driver function from ui with a custom snippet

[priyanka043]

Thanks,

I have tried to add the door loack with PC controller and i tried to get the usercode of 251, here i can get the master code, i have captured this through pc ziffer, i would be a great help if it possible to get/ set the master code with zwavejsui, PFA

[priyanka043]

Hi,

Can i get a driver function code to set a user code of a door lock?

[priyanka043]

As we can see in the source code if we want to set the code for user code from1 -250, i'm able to set but i'm unable to set the code to 251, i think its due to restrictions in source code. that it is allowing only 1-250, can you please help me to set the user code 251. i.e, the master code of the door lock

[AlCalzone]

First off: I'm on parental leave, so I may be slow to respond.

It appears that the lock you interviewed in the last log you posted has an entirely different ID than the one I edited the config file for:

OLD:
manufacturer id: 0x0129
product type: 0x8002
product id: 0x0600

NEW:
manufacturer id: 0x0129
product type: 0xffff
product id: 0x190f

Not sure if this is a mistake, or the device reports something else, or you interviewed a different lock? The new one doesn't even have a config file in our database.

Assuming this still is the same device, I've added the fingerprint to the modified file I sent you before:
yrc_yrd_226_246_256_446-zw2.json
Please replace the file in the config directory with this new one, then restart Z-Wave JS UI again, and re-interview your device again.
Ideally make another logfile, so I have something to investigate when this doesn't work.

[AlCalzone]

@priyanka043 did this work?

[priyanka043]

yes, I have changed this in server/node_modules/@zwave-js/config/config/devices path and then its working

[AlCalzone]

Could you make another log of a re-interview please, so I have all the info I need to make this fix available for everyone?

[AlCalzone]

@priyanka043 reminder :)