[bug]: Error when using tab selection for auto-completion under `nvm use` command #640

Seize-cf · 2024-02-26T09:12:27Z

What happened?

no error message

Steps to reproduce

install nvm
type nvm use in terminal
press tab button
bug is reproduced

Relevant output

nvm use lUsage: add-zsh-hook hook function
Valid hooks are:
  chpwd precmd preexec periodic zshaddhistory zshexit zsh_directory_name
add-zsh-hook:shift:55: shift count must be <= $#
Usage: add-zsh-hook hook function
Valid hooks are:
  chpwd precmd preexec periodic zshaddhistory zshexit zsh_directory_name
ts/

Screenshots and recordings

Operating System & Version

Zsh version

zsh 5.9 (x86_64-apple-darwin23.0)

Terminal emulator

xterm-256color

If using WSL on Windows, which version of WSL

None

Additional context

# Enable Powerlevel10k instant prompt. Should stay close to the top of ~/.zshrc.
# Initialization code that may require console input (password prompts, [y/n]
# confirmations, etc.) must go above this block; everything else may go below.
if [[ -r "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh" ]]; then
  source "${XDG_CACHE_HOME:-$HOME/.cache}/p10k-instant-prompt-${(%):-%n}.zsh"
fi

# If you come from bash you might have to change your $PATH.
# export PATH=$HOME/bin:/usr/local/bin:$PATH

# Path to your oh-my-zsh installation.
export ZSH="$HOME/.oh-my-zsh"

# Set name of the theme to load --- if set to "random", it will
# load a random theme each time oh-my-zsh is loaded, in which case,
# to know which specific one was loaded, run: echo $RANDOM_THEME
# See https://github.com/ohmyzsh/ohmyzsh/wiki/Themes
ZSH_THEME="powerlevel10k/powerlevel10k"

# Set list of themes to pick from when loading at random
# Setting this variable when ZSH_THEME=random will cause zsh to load
# a theme from this variable instead of looking in $ZSH/themes/
# If set to an empty array, this variable will have no effect.
# ZSH_THEME_RANDOM_CANDIDATES=( "robbyrussell" "agnoster" )

# Uncomment the following line to use case-sensitive completion.
# CASE_SENSITIVE="true"

# Uncomment the following line to use hyphen-insensitive completion.
# Case-sensitive completion must be off. _ and - will be interchangeable.
# HYPHEN_INSENSITIVE="true"

# Uncomment one of the following lines to change the auto-update behavior
# zstyle ':omz:update' mode disabled  # disable automatic updates
# zstyle ':omz:update' mode auto      # update automatically without asking
# zstyle ':omz:update' mode reminder  # just remind me to update when it's time

# Uncomment the following line to change how often to auto-update (in days).
# zstyle ':omz:update' frequency 13

# Uncomment the following line if pasting URLs and other text is messed up.
# DISABLE_MAGIC_FUNCTIONS="true"

# Uncomment the following line to disable colors in ls.
# DISABLE_LS_COLORS="true"

# Uncomment the following line to disable auto-setting terminal title.
# DISABLE_AUTO_TITLE="true"

# Uncomment the following line to enable command auto-correction.
# ENABLE_CORRECTION="true"

# Uncomment the following line to display red dots whilst waiting for completion.
# You can also set it to another string to have that shown instead of the default red dots.
# e.g. COMPLETION_WAITING_DOTS="%F{yellow}waiting...%f"
# Caution: this setting can cause issues with multiline prompts in zsh < 5.7.1 (see #5765)
# COMPLETION_WAITING_DOTS="true"

# Uncomment the following line if you want to disable marking untracked files
# under VCS as dirty. This makes repository status check for large repositories
# much, much faster.
# DISABLE_UNTRACKED_FILES_DIRTY="true"

# Uncomment the following line if you want to change the command execution time
# stamp shown in the history command output.
# You can set one of the optional three formats:
# "mm/dd/yyyy"|"dd.mm.yyyy"|"yyyy-mm-dd"
# or set a custom format using the strftime function format specifications,
# see 'man strftime' for details.
# HIST_STAMPS="mm/dd/yyyy"

# Would you like to use another custom folder than $ZSH/custom?
# ZSH_CUSTOM=/path/to/new-custom-folder

# Which plugins would you like to load?
# Standard plugins can be found in $ZSH/plugins/
# Custom plugins may be added to $ZSH_CUSTOM/plugins/
# Example format: plugins=(rails git textmate ruby lighthouse)
# Add wisely, as too many plugins slow down shell startup.
plugins=(git)

source $ZSH/oh-my-zsh.sh

# User configuration

# export MANPATH="/usr/local/man:$MANPATH"

# You may need to manually set your language environment
# export LANG=en_US.UTF-8

# Preferred editor for local and remote sessions
# if [[ -n $SSH_CONNECTION ]]; then
#   export EDITOR='vim'
# else
#   export EDITOR='mvim'
# fi

# Compilation flags
# export ARCHFLAGS="-arch x86_64"

# Set personal aliases, overriding those provided by oh-my-zsh libs,
# plugins, and themes. Aliases can be placed here, though oh-my-zsh
# users are encouraged to define aliases within the ZSH_CUSTOM folder.
# For a full list of active aliases, run `alias`.
#
# Example aliases
# alias zshconfig="mate ~/.zshrc"
# alias ohmyzsh="mate ~/.oh-my-zsh"
source ~/powerlevel10k/powerlevel10k.zsh-theme

# To customize prompt, run `p10k configure` or edit ~/.p10k.zsh.
[[ ! -f ~/.p10k.zsh ]] || source ~/.p10k.zsh

### Added by Zinit's installer
if [[ ! -f $HOME/.local/share/zinit/zinit.git/zinit.zsh ]]; then
    print -P "%F{33} %F{220}Installing %F{33}ZDHARMA-CONTINUUM%F{220} Initiative Plugin Manager (%F{33}zdharma-continuum/zinit%F{220})…%f"
    command mkdir -p "$HOME/.local/share/zinit" && command chmod g-rwX "$HOME/.local/share/zinit"
    command git clone https://github.com/zdharma-continuum/zinit "$HOME/.local/share/zinit/zinit.git" && \
        print -P "%F{33} %F{34}Installation successful.%f%b" || \
        print -P "%F{160} The clone has failed.%f%b"
fi

source "$HOME/.local/share/zinit/zinit.git/zinit.zsh"
autoload -Uz _zinit
(( ${+_comps} )) && _comps[zinit]=_zinit

zinit light zdharma-continuum/fast-syntax-highlighting
zinit light zsh-users/zsh-completions
zinit light zsh-users/zsh-autosuggestions
zinit light ael-code/zsh-colored-man-pages
zinit light MichaelAquilina/zsh-you-should-use
zinit light Pilaton/OhMyZsh-full-autoupdate
zinit snippet OMZP::git
zinit snippet OMZP::z
zinit snippet OMZP::sudo
zinit snippet OMZP::history
zinit snippet OMZP::nvm

alias codei="code-insiders"
alias zshconfig="codei ~/.zshrc"
alias zshhistory="codei ~/.zsh_history"
export NVM_DIR="$HOME/.nvm"


[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

alias nvmc="nvm current"

# pnpm
export PNPM_HOME="/Users/jh.tang/Library/pnpm"
case ":$PATH:" in
  *":$PNPM_HOME:"*) ;;
  *) export PATH="$PNPM_HOME:$PATH" ;;
esac
# pnpm end

# @antfu/ni
export NI_CONFIG_FILE="$HOME/.config/ni/nirc"

### MANAGED BY RANCHER DESKTOP START (DO NOT EDIT)
export PATH="/Users/jh.tang/.rd/bin:$PATH"
### MANAGED BY RANCHER DESKTOP END (DO NOT EDIT)

# mongodb
export PATH=/usr/local/mongodb/bin:$PATH

# mysql
export PATH=$PATH:/usr/local/mysql/bin

# redis-stack
export PATH=/usr/local/Caskroom/redis-stack-server/7.2.0/bin:$PATH

# Python
export PATH=$PATH:/Library/Frameworks/Python.framework/Versions/3.12/bin

here's my .zshrc file

when I comment out the zinit-related configuration, there are no more error messages

Code of Conduct

I agree to follow this project's Code of Conduct

The text was updated successfully, but these errors were encountered:

vladdoster · 2024-03-21T17:55:29Z

@Seize-cf,

Sorry for the delay in response.

Why are you escaping the . while sourcing?
Why do you have the lines below if you are using the nvm oh-my-zsh plugin?

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && . "$NVM_DIR/nvm.sh"
[ -s "$NVM_DIR/bash_completion" ] && . "$NVM_DIR/bash_completion"

Please confirm that this bug is reproducible with a minimal Zinit config (i.e., only loading nvm-related {plugin,snippet}s).

vladdoster · 2024-03-21T18:55:07Z

Wait, I just realized you are sourcing oh-my-zsh? Why are you doing that?

vladdoster · 2024-03-21T19:13:23Z

~~I wasn't able to reproduce this issue. I suspect it is due to something else in your config.~~

~~I tested your config and it works for me.~~

I can reproduce it, but please supply a minimal config where the issue appears. I do not want to debug your config and plugins.

Seize-cf · 2024-03-22T19:22:04Z

~~I wasn't able to reproduce this issue. I suspect it is due to something else in your config.我无法重现这个问题。我怀疑这是由于您的配置中的其他内容造成的。~~

~~I tested your config and it works for me.我测试了你的配置，它对我有用。~~

I can reproduce it, but please supply a minimal config where the issue appears. I do not want to debug your config and plugins.我可以重现它，但请提供出现问题的最小配置。我不想调试你的配置和插件。

settings below can both reproduce this bug

export ZSH="$HOME/.oh-my-zsh"

source $ZSH/oh-my-zsh.sh

plugins=(git nvm)

if [[ ! -f $HOME/.local/share/zinit/zinit.git/zinit.zsh ]]; then
    print -P "%F{33} %F{220}Installing %F{33}ZDHARMA-CONTINUUM%F{220} Initiative Plugin Manager (%F{33}zdharma-continuum/zinit%F{220})…%f"
    command mkdir -p "$HOME/.local/share/zinit" && command chmod g-rwX "$HOME/.local/share/zinit"
    command git clone https://github.com/zdharma-continuum/zinit "$HOME/.local/share/zinit/zinit.git" && \
        print -P "%F{33} %F{34}Installation successful.%f%b" || \
        print -P "%F{160} The clone has failed.%f%b"
fi

source "$HOME/.local/share/zinit/zinit.git/zinit.zsh"
autoload -Uz _zinit
(( ${+_comps} )) && _comps[zinit]=_zinit

export ZSH="$HOME/.oh-my-zsh"

source $ZSH/oh-my-zsh.sh

if [[ ! -f $HOME/.local/share/zinit/zinit.git/zinit.zsh ]]; then
    print -P "%F{33} %F{220}Installing %F{33}ZDHARMA-CONTINUUM%F{220} Initiative Plugin Manager (%F{33}zdharma-continuum/zinit%F{220})…%f"
    command mkdir -p "$HOME/.local/share/zinit" && command chmod g-rwX "$HOME/.local/share/zinit"
    command git clone https://github.com/zdharma-continuum/zinit "$HOME/.local/share/zinit/zinit.git" && \
        print -P "%F{33} %F{34}Installation successful.%f%b" || \
        print -P "%F{160} The clone has failed.%f%b"
fi

source "$HOME/.local/share/zinit/zinit.git/zinit.zsh"
autoload -Uz _zinit
(( ${+_comps} )) && _comps[zinit]=_zinit

export NVM_DIR="$HOME/.nvm"
[ -s "$NVM_DIR/nvm.sh" ] && \. "$NVM_DIR/nvm.sh"  # This loads nvm
[ -s "$NVM_DIR/bash_completion" ] && \. "$NVM_DIR/bash_completion"  # This loads nvm bash_completion

Seize-cf added the bug Something isn't working label Feb 26, 2024

Seize-cf assigned vladdoster Feb 26, 2024

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

[bug]: Error when using tab selection for auto-completion under `nvm use` command #640

[bug]: Error when using tab selection for auto-completion under `nvm use` command #640

Seize-cf commented Feb 26, 2024

vladdoster commented Mar 21, 2024 •

edited

vladdoster commented Mar 21, 2024

vladdoster commented Mar 21, 2024 •

edited

Seize-cf commented Mar 22, 2024

[bug]: Error when using tab selection for auto-completion under nvm use command #640

[bug]: Error when using tab selection for auto-completion under nvm use command #640

Comments

Seize-cf commented Feb 26, 2024

What happened?

Steps to reproduce

Relevant output

Screenshots and recordings

Operating System & Version

Zsh version

Terminal emulator

If using WSL on Windows, which version of WSL

Additional context

Code of Conduct

vladdoster commented Mar 21, 2024 • edited

vladdoster commented Mar 21, 2024

vladdoster commented Mar 21, 2024 • edited

Seize-cf commented Mar 22, 2024

[bug]: Error when using tab selection for auto-completion under `nvm use` command #640

[bug]: Error when using tab selection for auto-completion under `nvm use` command #640

vladdoster commented Mar 21, 2024 •

edited

vladdoster commented Mar 21, 2024 •

edited