CHANGELOG.md

Changelog

All notable changes to this project will be documented in this file.

The format is based on Keep a Changelog.

[Unreleased]

Added

Changed

• h3c: change prompt to expect either angle (user-view) or square (system-view) brackets (@nl987)
• xos: Hide radius and user secrets for XOS (@iriseden)

Fixed

• fixed prompt for vyos/vyatta to allow logins with non-priviliged accounts. Fixes #3111 (@h-lopez)

[0.30.1 – 2024-04-12]

Added

• document the release process (@robertcheramy)

Fixed

• The version string was not set correctly (@robertcheramy)

[0.30.0 – 2024-04-11]

Added

• model for D-Link cisco like CLI (@mirackle-spb)
• model for Ruijie Networks RGOS devices (@spike77453)
• Add serial number collection to Opengear (@ermuller)
• added support for AricentISS 2.x firmware (@davromaniak)
• model for Asterfusion Network Operating System (@avl-dev)
• pagination for http source (@davama)
• model for Ericsson Miniling 6600 series (@schouwenburg)
• model for Mimosa B11 (@ritzbhuj)
• added SCP input (@aeiodelic)
• Added linux/arm64 and linux/amd64 platforms to Docker build/publish. (@disaac)
• Added verion info for Vyatta (@systeembeheerder)
• model for Fibrestore (fs.com) FSOS (@tcrichton)
• model for IP Infusion OcNOS
• model for Fujitsu 1finity (@jerji)

Changed

• tp-link: fixed enable mode post login entrance (@mirackle-spb)
• dlink: fixed prompt for other dlink switches, added additional uptime removal expressions (@mirackle-spb)
• Collect VC info for juniper ex3400 (@ermuller)
• adva: fix config content for recovery process, collect config delta instead of current (@MichiMeyer)
• iosxr: include last config changed by in model (@electrocret)
• panos: exclude device dictionary
• Added support for Nokia SAR 7705 HMC in SROS model (@schouwenburg)
• fortios: only perform a "show" instead of a "show full-configuration" when retrieving configs from fortios. fixes timeouts and avoids extraneous defaulted config information. (@jforeman)
• opengear: support newer Opengear CM* and OM* models (@matej_v)
• edgecos: improve system temperature removal (@freddy36)
• zynos: Rewrite the script to properly collect config via ssh/telnet. Backup with FTP is not working atm, feel free to open an issue if needed. (@sharteeya)
• pfsense: exclude autogenerated firewall rule timestamps to reduce change churn from use of stuff like PFBlockerNG #2985 (@anthonysomerset)
• ciscosmb: ignore "Please change the password" hint when doing backup. (@sharteeya)
• c4cmts: uses chassis eeprom data for inventory information instead of environmental status (@nickhilliard)
• dlinknextgen removes user and snmp-server secrets (@tcrichton)
• dnos: hide secrets in "ospf message-digest-key", "authentication-type" and "bsd-username" (@rybnico)
• junos: Replace dynamic value in VMX-BANDWIDTH with count, hide ssh keys

Fixed

• fixed empty lines for ZyXEL GS1900 switches (@jluebbe)
• fixed prompt for Watchguard FirewareOS not matching the regex when the node is non-master (@netdiver)
• defined 'psych' runtime dependency to resolve 'unsafe_load' error during startup (@MattKobayashi)
• fixed new date/time format with newer RouterOS # jun/01/2023 12:11:25 by RouterOS 7.9.1 vs # 2023-06-01 12:16:16 by RouterOS 7.10rc1 (@tim427)
• fixed netscaler backups with hostname set #2828 (@electrocret)
• Do not redirect stderr when fetching opnsense version since default shell (csh) doesn't support it (@spike77453)
• Fix missing configuration for Opengear (@ermuller)
• Fixed fan RPM speeds included in Aruba CX diffs (@danpoltawski)
• Gitcrypt output refinements (@electrocret)
• Remove constantly updating dates from backup of Adtran config (@davesbell)
• fixed prompt for Cumulus to allow usernames with dots and dashes (@ktims)
• fixed source http when source is librenms (@davama)
• Fixed login and su regex unable to match in some comware devices (@sharteeya)
• fixed prompt detection for Netgear M4250-10G2XF-PoE+ and M4300-28G-PoE+ (@rexhaugen)
• fixed devices (pfsense, opnsense, openwrt) not retriving config after refinement change #2771 #2968 (@robertcheramy)
• Fixed login into Fortigate when post-login-baned ist enabled. Fixes #2021 (@chrisr0880, @sahdan, @dangoscomb and @robertcheramy)
• Fixed pre_logout for BDCOM switches
• Fix 'wpa passphrase' hashed secret for SonicOS devices with built-in wireless #3036 (@lazynooblet)
• Oxidized will now exit on SIGTERM and SIGINT; SIGHUP will trigger a node list reload and reopen logs (@gs-kamnas)
• Fix potential busy wait when retries and/or next_adds_job is enabled (@gs-kamnas)
• Reverting PR #2498 as it broke old procurve models (2510G, 2610, 2824). Fixes #2833, #2871 (@robertcheramy)
• Fixed regexp used to remove secrets in nxos model. Fixes #3080 (@desnoe)

[0.29.1 - 2023-04-24]

Added

Changed

• Ensure Docker builds are only pushed to registry on master (@aschaber1)

Fixed

• #2749: fix issues with cut_both

[0.29.0 - 2023-04-13]

• Ensure Docker Builds are tagged with latest and version (using git describe --tags) (@aschaber1)
• Upgrade Dockerfile baseimage to Ubuntu 22.04 and Ruby 3.0 (@aschaber1)
• Upgrade Ruby dependency to Ruby 3.0+ (@aschaber1)
• model for PanOS & Panorama via HTTP API (@pv2b, @sts)
• model for MikroTik SwOS devicse (@sm-nessus)
• model for TrueNAS devices (@neilschelly)
• model for Acme Packet devices (@ha36d)
• model for SmartCS devise (@yoshihito-tatano)
• Cumulus: added option to use NCLU as ia collecting method
• Update net-ssh to 7.0.1 (using append_all_supported_algorithms: true)
• Allow (config) (vlan-####) confirmation (y/n) and sftp questions in procurve prompt (@sorano)
• Added new model called srosmd to backup configuration fron Nokia SR OS devices running in the model-driven CLI mode, which has different syntax to existing sros model.
• fix: allow Netgear devices to finish SSH session correctly
• More pager handling for MIS5030Q (@glance-)
• Update logrotate example to allow logrotate service to start before any logs exist
• Mask NX-OS tacacs+ host keys (@0x4c6565)
• airfiber: prompt matching made case-insensitive to support AF5xHD (@noaheroufus)
• Cumulus: add support for dhcp-relay (@ohai89)
• Github Action: Support creating custom version tag in a release
• Add support for no enable password set on ironware
• change pfSense secret scrubbing to keep config as well-formed XML
• Add support for comware HPE Office Connect 1950
• Added model for Hirschmann Hios devices, next to alread present Hirschmann classic (@tijldeneut)
• (StoneOS) Prompt fix for long device names, '^H' handling and removal of ever-changing data (@dMailonG)

Added

• install rugged with ssh in Dockerfile (@agrevtcev)
• allow to run as non-root user in Docker (@agrevtcev)
• Extend http source configurations to include read_timeout value
• model for bdcom-based fiberstore switches (@candlerb)
• enterasys800 model for enterasys 800-series fe/ge switches (@javichumellamo)
• add ES3526XA-V2 support in EdgeCOS model (@moisseev)
• model for eltex mes-series switches (@glaubway)
• model for zte c300 and c320 olt (@glaubway)
• model for LANCOM (@systeembeheerder)
• model for Aruba CX switches (@jmurphy5)
• model for FortiWLC WLAn Controller (@MrMarioMichel)
• model for NEC IX devices (@mikenowak)
• Added docs for Dell/EMC Networking OS10 devices (@davromaniak)
• model for Zyxel 1308 OLTs (@baldoarturo)
• model for Linksys SRW switches (@glance-)
• Added exec hook variables to retrieve verbose node's failure reason and type
• model for Cambium ePMP radios (@martydingo)
• Added GaiaOS support for virtual systems (@rwxd)
• Added new group_map configuration option (@mjbnz)
• Dockerfile rebased to phusion/baseimage-docker focal-1.2.0
• model for Lenovo Network OS (@seros1521)
• new option: use_max_threads
• model for ADVA devices (@stephrdev)
• model for YAMAHA NVR/RTX Series (@bluekirin55)
• model for ZPE Nodegrid OS (@euph333)
• model for H3C switches
• model for Cisco Catalyst Express switches (@unemongod)
• extended mysql source configuration to include tls options (@glaubway)
• updated rugged in gemspec for ruby 3.0 support (@firefishy)
• Added exec hook for MS Teams webhook (@systeembeheerder)

Changed

• Better manage of the enable mode in edgeswitch.rb (@agabellini)
• Adds paging support to Enterasys B3/C3 (@piterpunk)
• Allows "Username" as username prompt in Brocade ICX-series devices (@piterpunk)
• Add show-sensitive flag on export command on Mikrotik RouterOS when remove_secret is off (@kedare)
• rubocop dependency now ~> 0.81.0, the last one with ruby 2.3 support
• change pfSense secret scrubbing to handle new format in 2.4.5+
• Dockerfile rebased to phusion/baseimage-docker bionic-1.0.0
• scrub PoE related messages from routeros config output (@pioto)
• support for d-link dgs-1100 series switches in dlink model (@glaubway)
• enterasys model now works with both ro and rw access (@sargon)
• restore including last configuration change IOS if the change is done by real user. Resolves #1921 (@raunz)
• Additional scrubbing for SonicOS v7 devices (@gerard780)
• improved Telnet support for enterasys (@jplitza)
• Include "show version" output for enterasys (@jplitza)
• xmppdiff now also shows diffs with only removed or only added lines (@jplitza)
• xmppdiff now persists its connection to the XMPP server and MUC (@jplitza)
• routeros no longer backups infos on available updates (@jplitza)
• avoid /humidity hardware field in tmos (F5) to be reported (@albsga)
• read all configurations in partition folder for tmos (F5) (@dalamanster)
• version information or OPNsense and PFsense models is now included as XML comments (@pv2b)
• netscaler, backup all partitions (@smallsam)
• only runs SSH proxy commands if the ssh_proxy configuration item has been defined (@jameskirsop)
• updated vrp.rb to correctly parse huawei devices
• asa: information about the configuration change time is deleted
• Extended groups configuration to support models vars within a group (@mjbnz)
• Extended remote_repo configuration to allow repo specific ssh keys (@mjbnz)
• sonicos: added scrubbing for hashed values (@televat0rs)
• nxos: Additional scrubbing for nxos device passwords (@derekivey)
• nxos: Fix password match to avoid stripping out the user role. (@derekivey)
• OpenBSD: Include bgpd, ospfd and ospf6d files (@woopstar)
• scrub often changing values in junos license output (@matejv)
• comware: support for enable(super) login password added (@delvta)
• use slack-ruby-client instead of slack-api for slackdiff hook (@0xmc)
• ios: Add support for RBAC in IOS model (@jameskirsop)
• hide unsupported-transceiver license key in Arista EOS (@davidc)
• edgecos: add support for FS S3900-48T6S-R (@cgsecurity)
• eltex: added one command for disable pagination on Eltex MES2424 switches (@mirackle-spb)

Fixed

• fixed an issue for IOSXR devices which can't allocate pty because of problem with forwarding agent.
• fixed an issue with the TrueNAS model where the configuration would come up blank when TrueNAS was also using it. (@neilschelly)
• fixed on issue where Oxidized could not pull config from Opengear devices #1899 (@rikard0)
• fixed an issue where Oxidized could not pull config from XOS-devices operating in stacked mode (@DarkCatapulter)
• fixed an issue where Oxidized could not pull config from XOS-devices that have not saved their configuration (@DarkCatapulter)
• improved scrubbing of show chassis in ironware model (@michaelpsomiadis)
• fixed snmp secret handling in netgear model (@CirnoT)
• generalise fortiOS to support new versions and VM based products e.g. FortiManager, FortiAnalyzer and FortiMail, which requires keyboard-interactive auth method. Includes trial-and-error cmd list to retrieve most infromative config. Fixes #2227. Moved 'system ha status' to 'config global' section to support clusters with virtual domains.
• filter next periodic save schedule time in xos model output (@sargon)
• Fix when auto-saved is configured on xos switches (@trappiz)
• fixed ArubaOS-CX enviroment/system inconsistent values #2297 (@raunz)
• further improvements to ArubaOS-CX environment values (@olemyhre)
• Update AirFiber prompt regex (@murrant)
• System time and running time are now stripped from tplink model output (@spike77453)
• <?xml... line is no longer improperly stripped from OPNsense and PFsense backups (@pv2b)
• fixed an issue where Oxidized timeouts in Brocade ICX-series devices (@piterpunk)
• fixed an issue where EOS config was truncated. Fixes #2038 (@jake2184 @fhibler)
• fixed missing output from routeros version command (@mjbnz)
• stopped clear: true from removing all commands (@mjbnz)
• Updated fastiron enable password prompt regex (@pepperoni-pi)
• fixed an issue where the pfsense model would not report errors in case it was unable to download the configuration e.g. due to insufficient permissions
• added a missing check for whether to send enable commands to Adtran devices (@repnop)
• fixed an issue where ADVA devices with a configured prompt != ADVA--> couldn't be polled (@momorientes)
• ensure local time and system up time are filtered for ADVA devices (@stephrdev)
• fixed an issue with FortiOS that didn't accurately match set ca lines #2567 (@neilschelly)
• removed unwanted current date from slxos model
• fixed secret handling for rip authentication in casa model #2648 (@grahamjohnston)
• stripped IoT-detect version for Fortigate devices
• Fix expect usage in models on telnet. Tested with Netgear GS108T. (@arrjay)
• Fix Sonicwall SonicOS "system-uptime" omission from log (@lazynooblet)
• purityos: at least v6.3.5 needs other terminal settings (@elliot64)
• purityos: remove purealerts and VEEAM snapshots from backed up config (@elliot64)

[0.28.0 - 2020-05-18]

Added

• add VMWare NSX Edge 6.4+ support (@elmobp)
• add Dell EMC Networking OS10 support (@mmisslin)
• add Centec Networks CNOS (Fiberstore S5800/S5850) support via cnos model (@freddy36)
• include transceiver information in EdgeCOS model (@freddy36)
• add Telco Systems T-Marc 3306 support via telco model (@SkylerBlumer)
• add enable support to ciscosmb (@deesel)
• add Waystream iBOS model
• add QTECH model (@moisseev)

Changed

• more secret scrubbing in sonicos (@s-fu)
• openssh key scrubbing as secret in fortios (@agabellini)
• scrubs macsec key from Arista EOS (@krisamundson)
• rubocop dependency now ~> 0.80.0
• rugged dependency now ~> 0.28.0
• cumulus model no longer records transient data (@plett)

Fixed

• use without-paging variant of print statement in routeros (@vkushnir)
• include the commands in the output in EdgeCOS model (@freddy36)
• update patterns for minor software version dependent differences in EdgeCOS model @freddy36)
• better login modalities for telnet in aos7 (@optimuscream)
• better virtual domain detection in fortios (@agabellini)
• allow any max length for username/password in GcomBNPS (@freddy36)
• relax prompt requirements in ciscosmb (@Atroskelis)
• fortios model strips uptime even without remove_secrets (@jplitza)
• HP ProCurve now accepts ">" as apart of the prompt (@magnuslarsen)
• fix IOS SNMP notification community hiding for informs and v3 (@moisseev)
• fixed issue where the regex-pattern for XOS-prompts used invalid syntax (@DarkCatapulter)
• set terminal width in EdgeCOS model (@moisseev)
• suppress errors for commands that are not supported on some devices in EdgeCOS model (@moisseev)
• revert including command names in the output of the EdgeCOS model (@moisseev)

[0.27.0] - 2019-10-27

Added

• add automatic restart on failure for systemd (@deajan)
• add ZynOS GS1900 specific model support (@deajan)
• add PurityOS model support (@elliot64)
• add Ubiquiti Airfiber model support (@cchance27)
• add Icotera support (@funzoneq)
• include licensing information in aos model (@pozar)
• include chassis information in sros model (@raunz)
• add firelinuxos (FirePOWER) model (@rgnv)
• add sonicos model (@rgnv)
• add hpmsm model (@timwsuqld)
• include hardware and product information in oneos model (@raunz)
• add FastIron model (@ZacharyPuls)
• add Linuxgeneric model (@davama)
• include HA status info in fortios model (@raunz)
• add SpeedTouch model (@raunz)
• comware added device manuinfo to include serial number (@raunz)

Changed

• add pgsql support, mechanized and net-tftp to Dockerfile
• upgrade slop, net-telnet and rugged
• extra secret scrubbing in comware model (@bengels00)
• removed snmpd lines from linuxgeneric model
• moved show configuration command to the end in junos model (@raunz)
• filter pap and chap passwords in ios model (@matejv)

Fixed

• prevent versionning on procurve switches by removing power usage output (@deajan)
• improve procurve telnet support for older switches (@deajan)
• voss model
• cambium model should not consider timestamp for backup as unneeded, and causes diffs -@cchance27)
• remove 'sh system' from ciscosmb model (@Exordian)
• dlink model didn't support prompts with spaces in the model type (Extreme EAS -00-24p) (@cchance27)
• routeros model does not collect configuration via telnet input (@hexdump0x0200)
• add dependencies for net-ssh
• don't log power module info on procurve model anymore
• crash on some recent Ruby versions in the nagios check (@Kegeruneku)
• remove stray whitespace in adtran model (@nickhilliard)
• if input model returns subclassed string we may overwrite the string with an empty -tring
• updated aosw.rb prompt. addresses issue #1254
• update comware model to fix telnet login/password for HPE MSR954 and HPE5130. Issue -1886
• filter out IOS configuration/NVRAM modified/changed timestamps to keep output -ersistent
• update screenos model to reduce the amount of lines being stripped from beginning of -fg output
• include colon in aosw prompt regexp in case it is a mac address (@raunz)
• comware improvement for requesting HP 19x0 switches hidden CLI. Issues #1754 and -1447
• fix variable inheritance when subclassing a model

[0.26.3] - 2019-03-06

Fixed

• regression in git.rb version method where we check if Rugged::Diff has any deltas/patches

[0.26.2] - 2019-03-05

Fixed

• suppress net-ssh 5 deprecation warnings by moving from :paranoid to :verify_host_key

[0.26.1] - 2019-03-04

Fixed

• force file permissions in rubygems

[0.26.0] - 2019-03-04

Added

• add Cisco VPN3000 model (@baznikin)
• add NetGear PROSafe Smart switches model (@baznikin)
• Added possibility to pass root logs directory as environment variable (@Glorf)
• add OneAccess TDRE (1645) model (@starrsl)
• add Audiocodes MediaPack MP-1xx and Mediant 1000 model (@pedjaj)
• add raisecom RAX model (@vitalisator)
• add huawei smartax model (@nyash)
• add grandstream model

Changed

• prompt updates in siklu, netonix, netscaler models
• minimal supported ruby is now 2.3, net-ssh dependency ~> 5, rubocop ~> 0.65.0

Fixed

• in git comparison we might mistakenly always detect change due to !utf8 vs. utf8 encoding of a char

[0.25.1] - 2018-12-18

Fixed

• update changelog which was forgotten during release

[0.25.0] - 2018-12-16

Added

• add viptela model (@bobthebutcher)
• add ECI Telecom Appolo platform bij arien.vijn@linklight.nl
• ssh keepalive now configurable per node with ssh_no_keepalive boolean
• add Comtrol model (@RobbFromIT)
• add Dell X-series model (@RobbFromIT)
• add privilege escalation to the cumulus model (@user4574)
• add adtran model (@CFUJoshWeepie)
• add firebrick model (@lewisvive)

Changed

• bump Dockerfile phusion/baseimage:0.10.0 -> 0.11, revert to one-stage build
• add sqlite3 and mysql2 drivers for sequel to Dockerfile
• Added verbiage to set OXIDIZED_HOME correctly under Debian 8.8 w/systemd
• add gpgme and sequel gems to Dockerfile for sources
• eos model removes user secrets and BGP secrets (@yzguy)
• add secret filtering to netscaler (@shepherdjay)
• capture ZebOS configuration for TMOS model (@yzguy)
• additional secret filters in ios, asa, procurve, ciscosmb models (@hexdump0x0200)
• remove volatile uptime data in nos model (@f0rkz)

Fixed

• netgear telnet password prompt not detected
• xos model should not modify config on legacy Extreme Networks devices (@sq9mev)
• model dlink, edgecos, ciscosmb, openbsd
• hide 'lighttpd_ls_password' as potential secret in pfsense model (@dra)
• ciscospark hook error when diff is set to false

[0.24.0] - 2018-06-14

Added

• add frr support to cumulus model (@User4574 / @bobthebutcher)
• honour MAX_STAT in mtime, to store last N mtime
• configurable stats history size
• model callback enhancements for customizing existing models (@ytti)

Fixed

• models ciscosmb, dlink

[0.23.0] - 2018-06-11

Added

• support arbitrary user/password/prompt detection in telnet, same behaviour as ssh
• manager refactor, support local loading of input, output, source, not just model and hook
• store modification time in node stats

Fixed

• model edgecos does not trigger false positives due to uptime and memory utilization (@sq9mev)
• Use SECRET-DATA hints for hiding secrets in JunOS (@Zmegolaz)
• comware (@adamboutcher)

[0.22.0] - 2018-06-03

Added

• openbsd model (@amarti2038)
• comnet model (@jaylik)
• stoneos model (@macaty)
• openwrt model (@z00nx)
• arbos model (@jsynack)
• ndms model (@yuri-zubov)
• openwert model (@z00nx)
• stoneos model (@macaty)
• comnetms model (@jaylik)
• openbsd model (@amarti2038)
• cambium model
• ssh key passphrase (@wk)
• cisco spark hook (@rgnv)
• added support for setting ssh auth methods (@laf)

Fixed

• models procurve, br6910, vyos, fortios, edgeos, vyatta, junos, powerconnect, supermicro, fortios, firewareos, aricentiss, dnos, nxos, hpbladesystem, netgear, xos, boss, opengear, pfsense, asyncos

[0.21.0] - 2017-11-01

Added

• routeros include system history (@InsaneSplash)
• vrp added support for removing secrets (@bheum)
• hirschmann model (@OCangrand)
• asa added multiple context support (@marnovdm)
• procurve added additional output (@davama)
• Updated git commits to bare repo + drop need for temp dir during clone (@asenci)
• asyncos model (@cd67-usrt)
• ciscosma model (@cd67-usrt)
• procurve added transceiver info (@davama)
• routeros added remove_secret option (@spinza)
• Updated net-ssh version (@Fauli83)
• audiocodes model (@Fauli83)
• Added docs for Huawei VRP devices (@tuxis-ie)
• ciscosmb added radius key detection (@davama)
• radware model (@sfini)
• enterasys model (@koenvdheuvel)
• weos model (@ignaqui)
• hpemsa model (@aschaber1)
• Added nodes_done hook (@danilopopeye)
• ucs model (@WiXZlo)
• acsw model (@sfini)
• aen model (@ZacharyPuls)
• coriantgroove model (@nickhilliard)
• sgos model (@seekerOK)
• powerconnect support password removal (@tobbez)
• Added haproxy example for Ubuntu (@denvera)

Fixed

• fiberdriver remove configuration generated on from diff (@emjemj)
• Fix email pass through (@ZacharyPuls)
• iosxr suppress timestamp (@ja-frog)
• ios allow lowercase user/pass prompt (@deepseth)
• Use git show instead of git diff (@asenci)
• netgear fixed sending enable password and exit/quit (@candlerb)
• ironware removed space requirement from password prompt (@crami)
• dlink removed uptime from diff (@rfdrake)
• planet removed temp from diff (@flokli)
• ironware removed fan, temp and flash from diff (@Punicaa)
• panos changed exit to quit (@goebelmeier)
• fortios remove FDS address from diffs (@bheum)
• fortios remove additional secrets from diffs (@brunobritocarvalho)
• fortios remove IPS URL DB (@brunobritocarvalho)
• voss remove temperature, power and uptime from diff (@ospfbgp)

[0.20.0] - 2017-05-14

Added

• gpg support for CSV source (@elmobp)
• slackdiff (@natm)
• gitcrypt output model (@clement-parisot)
• model specific credentials (@davromaniak)
• hierarchical json in http source model
• next-adds-job config toggle (to add new job when ever /next is called)
• netgear model (@aschaber1)
• zhone model (@rfdrake)
• tplink model (@mediumo)
• oneos model (@crami)
• cisco NGA model (@udhos)
• voltaire model (@clement-parisot)
• siklu model (@bdg-robert)
• voss model (@ospfbgp)

Fixed

• ios, cumulus, ironware, nxos, fiberdiver, aosw, fortios, comware, procurve, opengear, timos, routeros, junos, asa, aireos, mlnxos, pfsense, saos, powerconnect, firewareos, quantaos

[0.19.0] - 2016-12-12

Added

• allow setting ssh_keys (not relying on openssh config) (@denvera)
• fujitsupy model (@stokbaek)
• fiberdriver model (@emjemj)
• hpbladesystems model (@flokli)
• planetsgs model (@flokli)
• trango model (@rfdrake)
• casa model (@rfdrake)
• dlink model (@rfdrake)
• hatteras model (@rfdrake)
• ability to ignore SSL certs in http (@laf)
• awsns hooks, publish messages to AWS SNS topics (@natm)

Fixed

• pfsense, dnos, powerconnect, ciscosmb, eos, aosw

[0.18.0] - 2016-10-14

Added

• APC model (by @davromaniak)

Fixed

• ironware, aosw
• interpolate nil, false, true for node vars too

[0.17.0] - 2016-09-28

Added

• "nil", "false" and "true" in source (e.g. router.db) are interpeted as nil, false, true. Empty is now always considered empty string, instead of in some cases nil and some cases empty string.
• support tftp as input model (@MajesticFalcon)
• add alvarion model (@MajesticFalcon)
• detect if ssh wants password terminal/CLI prompt or not
• node (group, model, username, password) resolution refactoring, supports wider range of use-cases

Fixed

• fetch for file output (@danilopopeye)
• net-ssh version specification
• routeros, catos, pfsense

[0.16.3] - 2016-08-25

Added

• pfsense support (by @stokbaek)

Fixed

• cumulus prompt not working with default switch configs (by @nertwork)
• disconnect ssh when prompt wasn't found (by @andir)
• saos, asa, acos, timos updates, cumulus

[0.16.2] - 2016-07-28

Fixed

• when not using git (by @danilopopeye)
• screenos update

[0.16.1] - 2016-07-22

Fixed

• unnecessary puts statement removed from git.rb

[0.16.0] - 2016-07-22

Added

• support Gaia OS devices (by @totosh)

Fixed

• #fetch, #version fixes in nodes.rb (by @danilopopeye)
• procurve

[0.15.0] - 2016-07-11

Added

• disable periodic collection, only on demand (by Adam Winberg)
• allow disabling ssh exec mode always (mainly for oxidized-script) (by @nickhilliard)
• support mellanox devices (by @ham5ter)
• support firewireos devices (by @alexandre-io)
• support quanta devices (by @f0o)
• support tellabs coriant8800, coriant8600 (by @udhos)
• support brocade6910 (by @cardboardpig)

Fixed

• debugging, tests (by @ElvinEfendi)
• nos, panos, acos, procurve, eos, edgeswitch, aosw, fortios updates

[0.14.3] - 2016-05-25

Fixed

• fix git when using multiple groups without single_repo

[0.14.2] - 2016-05-19

Fixed

• git expand path for all groups
• git get_version, teletubbies do it again
• comware, acos, procurve models

[0.14.1] - 2016-05-06

Fixed

• git get_version when groups and single_repo are used

[0.14.0] - 2016-05-05

Added

• support supermicro swithes (by @funzoneq)
• support catos switches

Fixed

• git+groups+singlerepo (by @PANZERBARON)
• asa, tmos, ironware, ios-xr
• mandate net-ssh 3.0.x, don't accept 3.1 (numerous issues)

[0.13.1] - 2016-03-30

Fixed

• file permissions (Sigh...)

[0.13.0] - 2016-03-30

Added

• http post for configs (by @jgroom33)
• support ericsson redbacks (by @roedie)
• support motorola wireless controllers (by @roadie)
• support citrix netscaler (by @roadie)
• support datacom devices (by @danilopopeye)
• support netonix devices
• support specifying ssh cipher and kex (by @roadie)
• rename proxy to ssh_proxy (by @roadie)
• support ssh keys on ssh_proxy (by @awix)

Fixed

• various (by @danilopopeye)
• Node#repo with groups (by @danilopopeye)
• githubrepohoook (by @danilopopeye)
• fortios, airos, junos, xos, edgeswitch, nos, tmos, procurve, ipos models

[0.12.2] - 2016-02-06

Fixed

• more MRV model fixes (by @natm)

[0.12.1] - 2016-02-06

Fixed

• set term to vty100
• MRV model fixes (by @natm)

[0.12.0] - 2016-02-05

Added

• enhance AOSW (by @mikebryant)
• F5 TMOS support (by @mikebryant)
• Opengear support (by @mikebryant)
• EdgeSwitch support (by @doogieconsulting)

Fixed

• rename input debug log files
• powerconnect model fixes (by @Madpilot0)
• fortigate model fixes (by @ElvinEfendi)
• various (by @mikebryant)
• write SSH debug to file without buffering
• fix IOS XR prompt handling

[0.11.0] - 2016-01-27

Added

• ssh proxycommand (by @ElvinEfendi)
• basic auth in HTTP source (by @laf)

Fixed

• do not inject string to output before model gets it
• store pidfile in oxidized root

[0.10.0] - 2016-01-06

Added

• Various refactoring (by @ElvinEfendi)
• Ciena SOAS support (by @jgroom33)
• support group variables (by @supertylerc)

Fixed

• various ((orly)) (by @marnovdm, @danbaugher, @MrRJ45, @asynet, @nickhilliard)

[0.9.0] - 2015-11-06

Added

• input log now uses devices name as file, instead of string from config (by @skoef)
• Dell Networkign OS (dnos) support (by @erefre)

Fixed

• CiscoSMB, powerconnect, comware, xos, ironware, nos fixes

[0.8.1] - 2015-09-17

Fixed

• restore ruby 1.9.3 compatibility

[0.8.0] - 2015-09-14

Added

• hooks (by @aakso)
• MRV MasterOS support (by @kwibbly)
• EdgeOS support (by @laf)
• FTP input and Zyxel ZynOS support (by @ytti)
• version and diffs API For oxidized-web (by @FlorianDoublet)

Fixed

• aosw, ironware, routeros, xos models
• crash with 0 nodes
• ssh auth fail without keyboard-interactive

[0.7.1] - 2015-05-26

Fixed

• rugged is again in gemspec (mandatory) (@ytti)

[0.7.0] - 2015-05-21

Added

• support http source (by @laf)
• support Palo Alto PANOS (by @rixxxx)

Fixed

• screenos fixes (by @rixxxx)
• allow 'none' auth in ssh (spotted by @SaldoorMike, needed by ciscosmb+aireos)

[0.6.0] - 2015-04-22

Added

• support cumulus linux (by @FlorianDoublet)
• support HP Comware SMB siwtches (by @sid3windr)
• remove secret additions (by @rodecker)
• option to put all groups in single repo (by @ytti)
• expand path in source: csv: (so that ~/foo/bar works) (by @ytti)

Fixed

• screenos fixes (by @rixxxx)
• ironware fixes (by @FlorianDoublet)
• powerconnect fixes (by @sid3windr)
• don't ask interactive password in new net/ssh (by @ytti)

[0.5.0] - 2015-04-03

Added

• Mikrotik RouterOS model (by @emjemj)
• add support for Cisco VSS (by @MrRJ45)

Fixed

• general fixes to powerconnect model (by @MrRJ45)
• fix initial commit issues with rugged (by @MrRJ45)
• pager error for old dell powerconnect switches (by @emjemj)
• logout error for old dell powerconnect switches (by @emjemj)

[0.4.1] - 2015-03-10

Fixed

• handle missing output file (by @brandt)
• fix passwordless enable on Arista EOS model (by @brandt)

[0.4.0] - 2015-03-06

Added

• allow setting IP address in addition to name in source (SQL/CSV)
• approximate how long it takes to get node from larger view than 1
• unconditionally start new job if too long has passed since previous start
• add enable to Arista EOS model
• add rugged dependency in gemspec
• log prompt detection failures

Fixed

• xos while using telnet (by @fhibler)
• ironware logout on some models (by @fhibler)
• allow node to be removed while it is being collected
• if model returns non string value, return empty string
• better prompt for Arista EOS model (by @rodecker)
• improved configuration handling for Arista EOS model (by @rodecker)

[0.3.0] - 2015-02-13

Added

• FIXME bunch of stuff I did for richih, docs needed
• ComWare model (by erJasp)
• Add comment support for router.db file
• Add input debugging and related configuration options

Fixed

• Fix ASA model prompt
• Fix Aruba model display
• Fix changing output in PowerConnect model

[0.2.4] - 2015-02-02

Added

• Cisco SMB (Nikola series VxWorks) model by @thetamind
• Extreme Networks XOS model (access by sjm)
• Brocade NOS (Network Operating System) (access by sjm)

Fixed

• Match exactly to node[:name] if node[name] is an ip address.

[0.2.3] - 2014-08-16

Added

• Alcatel-Lucent ISAM 7302/7330 model added by @jalmargyyk
• Huawei VRP model added by @jalmargyyk
• Ubiquiti AirOS added by @willglyn
• Support 'input' debug in config, ssh/telnet use it to write session log

Fixed

• rescue @ssh.close when far end closes disgracefully (ALU ISAM)
• bugfixes to models

[0.2.2] - 2014-07-24

Fixed

• mark node as failure if unknown error is raised

[0.2.1] - 2014-07-24

Fixed

• vars variable resolving for main level vars

[0.2.0] - 2014-07-24

Added

• Force10 model added by @lysiszegerman
• ScreenOS model added by @lysiszegerman
• FabricOS model added by @thakala
• ASA model added by @thakala
• Vyattamodel added by @thakala

Fixed

• Oxidized::String convenience methods for models fixed

[0.1.1] - 2014-07-21

Fixed

• vars needs to return value of r, not value of evaluation