ASUS Z10PA-D8. Doesn't boot only after ReBarState.exe with 32

[SlimRG]

System

• Motherboard: ASUS Z10PA-D8

• BIOS Version: Z10PA-D8-ASUS-3801 (https://disk.yandex.ru/d/46p8AXX9CawTVw)

• Modded BIOS: (https://disk.yandex.ru/d/uA7qCh1AiP-fxw)

• GPU: Gainward RTX 3070 Phantom

• [ Y] CSM is turned off

• [Y ] 4G decoding is enabled

• [Y ] UEFIPatch is applied (see README for more information)

1. I update VGA driver for GPU
2. I get original firmware
3. I turn on 4G and turn of CSM
4. I add ReBarDxe.ffs in firmware
5. I insert patch by UEFIPatch_0.28.0_win32
6. I install firmawe and reboot
7. I reconfigure bios and reboot
8. I run ReBarState.exe, set 32 and tried to reboot.
9. PC doesn't start. If I install back original bios - it boot, if I install patched bios - it boot. But after this app - it doesn't boot.

BIOS POST Code: 87

Pls, help me. I will give you all info you want.

P.S. I have programmator - so I can flash bios)

[xCuri0]

Try starting with smaller sizes such as 9 (512MB) and increase till it stops working. Also check device manager resources to see if it's being allocated a 64-bit address or not

[SlimRG]

Try starting with smaller sizes such as 9 (512MB) and increase till it stops working. Also check device manager resources to see if it's being allocated a 64-bit address or not

Any value doesn't work

[SlimRG]

I think - I made smth wrong with bios rom. But - don't know what wrong I made...

[xCuri0]

@SlimRG take a screenshot of device manager resources showing the GPU with just 4G decode on

[xCuri0]

@SlimRG did you see this ?

[SlimRG]

@SlimRG did you see this ?

yes

But, I'm not at home - will be at home at 09.01.2023

[SlimRG]

Sorry for waiting
Today is the first day, I'm not drinking)

[savvadesogle]

System

* Motherboard: ASUS Z10PA-D8

* BIOS Version: Z10PA-D8-ASUS-3801 (https://disk.yandex.ru/d/46p8AXX9CawTVw)

* Modded BIOS: (https://disk.yandex.ru/d/uA7qCh1AiP-fxw)

* GPU: Gainward RTX 3070 Phantom

* [ Y] CSM is turned off

* [Y ] 4G decoding is enabled

* [Y ] UEFIPatch is applied (see README for more information)


1. I update VGA driver for GPU

2. I get original firmware

3. I turn on 4G and turn of CSM

4. I add [ReBarDxe.ffs](https://github.com/xCuri0/ReBarUEFI/releases/download/0.2/ReBarDxe.ffs) in firmware

5. I insert patch by UEFIPatch_0.28.0_win32

6. I install firmawe and reboot

7. I reconfigure bios and reboot

8. I run [ReBarState.exe](https://github.com/xCuri0/ReBarUEFI/releases/download/0.2/ReBarState.exe), set 32 and tried to reboot.

9. PC doesn't start. If I install back original bios - it boot, if I install patched bios - it boot. But after this app - it doesn't boot.

BIOS POST Code: 87

Pls, help me. I will give you all info you want.

P.S. I have programmator - so I can flash bios)

Hello, did you install rebar patch? I have same motherboard (but z10pe-d8 WS)

[Black6spdZ]

System

* Motherboard: ASUS Z10PA-D8

* BIOS Version: Z10PA-D8-ASUS-3801 (https://disk.yandex.ru/d/46p8AXX9CawTVw)

* Modded BIOS: (https://disk.yandex.ru/d/uA7qCh1AiP-fxw)

* GPU: Gainward RTX 3070 Phantom

* [ Y] CSM is turned off

* [Y ] 4G decoding is enabled

* [Y ] UEFIPatch is applied (see README for more information)


1. I update VGA driver for GPU

2. I get original firmware

3. I turn on 4G and turn of CSM

4. I add [ReBarDxe.ffs](https://github.com/xCuri0/ReBarUEFI/releases/download/0.2/ReBarDxe.ffs) in firmware

5. I insert patch by UEFIPatch_0.28.0_win32

6. I install firmawe and reboot

7. I reconfigure bios and reboot

8. I run [ReBarState.exe](https://github.com/xCuri0/ReBarUEFI/releases/download/0.2/ReBarState.exe), set 32 and tried to reboot.

9. PC doesn't start. If I install back original bios - it boot, if I install patched bios - it boot. But after this app - it doesn't boot.

BIOS POST Code: 87
Pls, help me. I will give you all info you want.
P.S. I have programmator - so I can flash bios)

Hello, did you install rebar patch? I have same motherboard (but z10pe-d8 WS)

Same problem with NvStrapsReBar and a 2080 on my Z10PE-D8